Diesel Forklift

Hyster H9.00XM-6

Condition: good (used), machine/vehicle number: 3449, Year of construction: 2019, load capacity: 8,000 kg, lifting height: 6,940 mm, mast type: triplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,360 mm, total width: 2,550 mm, operation weight: 16,070 kg, additional equipment features: Centralized greasing system, Hydraulic sliding cabin, Dual tread, Rear mud guards, Warning triangle, Equipment: lighting, Hyster HYSTER H9.00XM-6 from Uniktruck Kdsdowkizfspfx Ah Njg

Condition: used, Year of construction: 2012, Technical details: turning diameter over bed: 20 mm spindle passage: 3-20 mm turning length: 250 mm control: FANUC 31 i-A main-spindle speed: 10.000 1/min subspindle speed: 10.000 1/min Main spindle capacity: 3,7 kW subspindle power: 2,2 kW number of tools: 35 weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Ksdpfxovivx Ns Ah Njdg Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short turning Deep hole drilling stations NAKANISHI high-speed spindle Rear slide with Y-axis Cross drilling rear side Chip conveyor Fire extinguishing system FMB bar loader Minimag 20, year 2012 Approx. 7.200 working hours *

Condition: good (used), machine/vehicle number: 3069, Year of construction: 2018, load capacity: 9,000 kg, lifting height: 5,600 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,440 mm, total length: 4,270 mm, total width: 2,555 mm, operation weight: 13,430 kg, additional equipment features: Rear mud guards, Centralized greasing system, Front mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Kedpeul Du Tofx Ah Njdg

Condition: good (used), machine/vehicle number: 2241, Year of construction: 2017, load capacity: 9,000 kg, lifting height: 4,650 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,400 mm, total length: 4,304 mm, total width: 2,419 mm, operation weight: 13,700 kg, additional equipment features: Front mud guards, Rear mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Ksdew En Hpepfx Ah Nsdg

Condition: used, Year of construction: 2006, x-travel 800 mm y-travel 700 mm Kjdpfx Ahexiy Ano Njdg z-travel 550 mm Control Heidenhain TNC 530

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Kdodpfxovpgq Ne Ah Neg Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: excellent (used), Year of construction: 2019, CNC vertical lathe – 3 axes Brand: HYUNDAI WIA Model: LV 800 RM Year: 2019 (575 cutting hours) CNC: FANUC 32iB + manual guide Kdodpfx Ajxxt Ebjh Njg Specifications: Turning capacities: Max through diameter: 890 mm Max turning diameter: 800 mm Max turning height: 800 mm Horizontal travel: 440 mm Vertical travel: 800 mm C axis: 360,000 positions Hydraulic 3-jaw chuck: Diameter: 530 mm Spindle speed: 2,000 rpm Main motor power: 37/30 kW Dimensions (W x D x H): 2000 x 2877 x 3300 mm Weight: 11 T Equipped with: 12-position tool turret C axis 0.001° Live tooling spindle 7.5 kW, 3000 rpm Coolant through tools 20 Bar Renishaw Quickset Live tool holders 3 x axial, 3 x radial Turning tool holders Set of jaws Manual 3-jaw chuck dia. 630 mm Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil. Kodpfx Ahswpu Ete Njdg

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. Kdsdpfx Asrq D Nioh Nsg The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: excellent (used), Year of construction: 2008, Spinner TS66L-SMC CNC Lathe with Sub-Spindle Kdsdpexptz Rjfx Ah Nog Year of manufacture: 2008 Control: FANUC 18i-TB Turning diameter: 400 mm Turning length: 640 mm Bar capacity: 66 mm Swing diameter: 685 mm Travel (X-axis): 240 mm Travel (Z-axis): 640 mm Main spindle speed: 4,000 rpm Sub-spindle speed: 5,000 rpm Main spindle bore: 73 mm Sub-spindle bore: 43 mm C-axis: 0.001° Turret: 12 positions, all driven Tool holder: VDI 30 Driven tools: 9 kW Driven tool speed: 4,000 rpm Feed rate, stepless: 500 mm/min Rapid traverse X-axis: 18 m/min Rapid traverse Z-axis: 24 m/min Spindle motor power: 19 / 14 kW Machine weight: approx. 5.7 t Space requirements: approx. 2.35 x 1.65 x 1.85 m