Case making machine

Hoerauf BDM20 Case Maker

Condition: used, Year of construction: 1982, Kolbus DA 780 Automatic case maker with hard cover Production speed: ~25–35 cycles per minute Csdsxz D Ncjpfx Akcegt Case size range: Approx. 140 × 200 mm – 670 × 390 mm Board thickness: 1–4 mm Spine width: 6–80 mm (adjustable) Cover material: Paper, cloth, or coated materials suitable for cold glue Glue type: Cold (dispersion) glue; hot-melt optional retrofit Drive power: ~3–5 kW Machine weight: ~2.5 – 3 tons

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Codpfxjxdmxle Akcogt

Condition: excellent (used), Kolbus casing in with joint forming by Smyth After general renovation at GM Gross. Still in production Format / size 100x125mm - 260x350mm Book block thickness / Book block thickness 4-60 mm Cgedpswm E Rnefx Akcot capacity from 500 -800 blocks per hour

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Cgsdpfx Akeuf Sy Ajcot Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Cgedpfjwnqtkox Akcjt Machine no: 34, Books produced: 2 million

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Cgedpsx Ryr Iofx Akcot

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Ricoh Pro C7100X colour production system. Item for sale: 1 x Ricoh Pro C7100X with the following equipment: Includes Heidelberg Prinect Includes Vacuum Feed LCIT RT5100 Includes Booklet Finisher SR5060 Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,925,251 pages Colour: Approx. 1,061,512 pages Black: Approx. 863,739 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. Cgsdjx D Avtjpfx Akcjt For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2011, Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit - Rotary cover feeder - Nipping and pressing station - Belt delivery Cjdpfxowpfzro Akcjgt Optional available: Wohlenberg lay down delivery for connection to a conveyor system / three knife trimmer Description modified on Max. mechanical speed: up to 2.000 cycles/h Maximum size range (wxhxt): 430 x 320 x 70 mm Minimum size range (wxhxt): 110 x 105 x 2 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 1999, Sammelhefter / Saddle Stitcher Heidelberg ST 100.1Year 1999 8 Anleger DVA (4x Doppelanleger) / 8 Feeder DVA (4x double feeder) 1 Umschlagfalzanleger UFA / 1 cover feeder UFA Heftstation / Stitching unit Heidelberg 100.1 Cgedeqpplwopfx Akcot Dreischneider / Three Knife Trimmer Bandauslage / Band Delivery Inkl. Kompressor / Include Compressor 2x Hohner Heftköpfe / 2x Hohner Stitching headsFormat min.(unbeschnitten) / Size min.(uncutt) 89 x 120mm Format min.(unbeschnitten) / Size min.(uncutt) 305 x 349mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Cgodjvf Dtyopfx Akcjt Description: - Right hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2