Mini excavator

Hitachi ZX160W

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm wide Dksdpsufi Rxsfx Afnjg Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table

Condition: used, Industrial tires Volvo quick coupler with forks Dksdpfx Afet N Rhzsnsg Standard bucket 3000lt.

Condition: used, mileage: 117,500 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 620 l, color: orange, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 9,100 mm, total width: 2,550 mm, Year of construction: 2020, DAF CF 480 FAN WITH FASSI F235 A.2.23 E-DYNAMIC CRANE + TAM T20SN56100 + WEIGHING SYSTEM Suitable for containers from 380 cm to 620 cm, and up to 700 cm with extendible bumper. Wheelbase according to COC: 670 cm Axle 1-2: 530 cm Axle 2-3: 140 cm FASSI F235A.2.23 E-DYNAMIC Crane + TAM T20 SN 5.600 Hooklift System Slewing moment: 17.13 tm Maximum crane arm outreach: 10.5 m Slewing range: 400° Torque output: 30.8 kNm Oil tank: 120 litres Crane weight in standard version, without oil and accessories: 2,630 kg Photos may not correspond to actual condition. The vehicle has always been properly maintained. Vehicle is part of the rental fleet and stored at various locations. For inquiries, please contact us. = More information = Transmission: TRAXON, 12-speed, Automatic Front axle: Tyre size: 385/65 R22.5; Max. axle load: 9,000 kg; Steering axle; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: parabolic springs Rear axle 1: Tyre size: 315/80 R22.5; Twin tyres; Max. axle load: 12,000 kg; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/65 R22.5; Lift axle; Max. axle load: 7,400 kg; Steering axle; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: air suspension Dksdpfsvivt Hsx Afnog Bodybuilder: TAM T20SN56100 Pump: Yes Price: On request Registration number: CKR08

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Dkjdpfx Afjth T Umjnjg Body: MB, MAN, IVECO, VOLVO, SCANIA etc. used front axles, 50x available! various used front axles for 100,- to 300,- EUR per piece depending on condition ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Dkodpfok Hz Nqox Afnsg Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2025, condition: new, Multifunctional screening plant SBS 1520 F3 developed from more than 30 years of experience and already sold more than 650 pcs. Sand screening, cable sand making, compost screening, construction waste screening, recycling material screening, topsoil screening, excavation screening, wood chips screening, gravel screening, coal screening, scrap screening,slag screening, humus screening, asphalt screening, milled material screening Standard version - according to the following technical description: 1 screening box with feed hopper and 2 screening decks Screening deck according to your requirements 1 unbalance motor 1 rubber screen brake 1 side discharge belt 1 box as machine frame incl. forklift lug and crane eyes 1 additional chute at the feed hopper, to extend the screening area ----- 8 steel springs for optimum screening and screening intensity ----- 1 control cabinet with FI circuit breaker, emergency stop button and phase inverter for turning the screening direction Technical data: 2 deck screening plant upper deck: 2000 x 1500 mm lower deck: 2000 x 1500 mm 3 - fractions weight : 1500 kg Drive : 400 V / 1,1 kW / ( 16 A ) Transport dimensions: Width : 1550 mm / with belt 2000 mm length : 2850 mm Height : 2680 mm Conveyor belt 0,75 KW length : 2900 mm Width : 300 mm Dkjdpogmibvofx Afneg You are welcome to visit and test the screening plant at our stockyard in Rodgau Weiskirchen.

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2022, operating hours: 295 h, Year of manufacture: 2022 Drive: Wheel Unladen weight: 38,500 kg CE marking: Yes Technical condition: Very good Visual condition: Very good Price: On request NEW/DEMO CATERPILLAR MH3040 MATERIAL HANDLER YEAR OF MANUFACTURE 2022 ONLY 295 DEMO HOURS!!! MAXIMUM REACH 15,490 MM MH BOOM 9.3 M (30'6") Dodpfx Afouxr Ngjnjkg STICK 7.1 M (23'3") MAX HEIGHT 17,510 MM MAX STOCKPILE HEIGHT 5,445 MM MAX DEPTH 5,265 MM JIB PIN HEIGHT 12,195 MM 4X OUTRIGGERS HEAVY-DUTY AXLES HYDROSTATIC TRANSMISSION CAT C7.1 ENGINE TIRES 16.00-25 HYDRAULIC ELEVATING CAB CAB PROTECTION AUTOMATIC AIR CONDITIONING LCD TOUCHSCREEN MONITOR TEMPERED P5A WINDSHIELD CAMERA CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2025, machine/vehicle number: 145568556, Gasparin jaw crusher GI129C Everest mobile jaw crusher on crawler track 55 ton machine with extremely robust crusher and exceedingly high potential. It is characterized by the robust construction in all its parts and is certainly the best answer to the most heaviest applications. Equipped with Grizzly vibratory feeder (GI129C), it is suitable for more traditional applications, with Vibratory feeder and pre-screen, on the other hand, the machine (GI129CV) is suitable for arduous operations with high fines content and high material moisture. Equipped as standard with the patented HCS system (Hydraulic Crushing System), EVEREST is the best answer to quarry requirements. Production capacity: approx. 400 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. gap hydraulically adjustable even during crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator Dkodpfx Afjhd Na Henjg warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Jaw crusher 1150 x 850 mm crushing gap from 75 to 200 mm feed hopper 7 m³ - 2850 x 4960 mm Grizzly feeder 1120 x 4250 mm Main conveyor belt 1100 x 10000 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 500 x 3900 mm Weight: kg transport length 12950 mm Transport width:3000 mm Transport height 3400 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. Dedpfx Afoghgdvjnjkg APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English govorimo srpsko-hrvatski Dkedpfxevm N Dts Afneg our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel: