Articulated boom lift

Haulotte HA 20 PX

Condition: used, Year of construction: 2012, operating hours: 4,532 h, 2012 | Haulotte Ha 20 Px (21m) | Used Articulated Boom Lift | 4532 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18800 or Make an Offer. Bedpfxjyc N Rvs Afmjwp Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 52 inspection points 43 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good operating boomlift , extraction button needs to be replaced in manbasket dash ,engine cover needs to be fixed , wiring from dashboard needs to be checked , engine shuts down when opening control box 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39706 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, Mini Crawler Crane TB5000 A mini crane on a crawler chassis designed for indoor and outdoor work. Maximum lifting capacity: 2400 kg. * radio control of the device - driving, working, spreading the feet * double power supply of the crane - diesel and electric 230 V Bjdeibqraepfx Afmswp * maximum lifting capacity - 2400 kg * anti-overload system as standard * maximum horizontal reach over 11 m * four hydraulic extensions + 1 manual extension * maximum vertical reach over 13 m * 4 hydraulically lowered supports * weight approx. 2200 kg * height approx. 195 cm * width approx. 88 cm * active arm 16 degrees Additional, optional equipment: * search hook * hydraulic winch 990 kg * Li-ion battery power supply * pads for support feet * hydraulic FLY JIB Available in the selected color.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 1,622 h, power: 38 kW (51.67 HP), load capacity: 230 kg, lifting height: 20,000 mm, platform length: 1,800 mm, platform width: 800 mm, overall weight: 11,710 kg, transport length: 8,930 mm, transport width: 2,380 mm, transport height: 2,670 mm, fuel type: diesel, color: yellow, Equipment: all wheel drive, We have several used HA20 PX units available, each thoroughly inspected and ready for immediate deployment on rough terrain. The units have always been part of our rental fleet and have been consistently and professionally serviced by our in-house technical team. This ensures machines in good condition, ready for professional use. Prices from €25,000 or €30,000, depending on operating hours. Bodpfx Aox Tgrtjfmowp

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine. Bodpfewhw Iuex Afmowp

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw Bwjdpfx Aoxq Rgyefmjp - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

Condition: used, Year of construction: 2021, total length: 7,950 mm, Articulated telescopic work platform Manitou 180 ATJ Drive Diesel Year built 2021 Work height (mm) 18,190 Bsdpfx Afjy Abifomewp

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Bjdpfx Aowz Nzmjfmswp Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: used, made by Knapp tape length: 8900 mm travel speed: 30 meters/minute height adjustable, currently 800 mm tape width: 280 mm channel width: 320 mm total width: 380 mm tape material: rubber fabric, minimally ribbed in the longitudinal direction. Bsdpfxouf S A Re Afmswp frame powder-coated steel drive: Geared electric motor Sew-Eurodrive power: 0.37 kw 50Hz 400v

Condition: new, mileage: 50 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: # 533 Mercedes Benz ACTROS 2546 6x2/ Kroll ADR Suction Unit, K 1.0 - 13.5 / 36 PESP This Mercedes-Benz Actros 2546 6x2 is equipped with a high-performance KROLL suction/pressure tank body of ADR class L4BH and, with a 14,500-litre tank capacity, VacuStar W1300, and Speck P45/85-160, offers a robust and efficient solution for demanding industrial, sewer, and emulsion suction applications. Featuring a telescopic DN100 boom, extensive special equipment, and comprehensive safety and comfort features, this vehicle is optimally equipped for professional use. Body Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material S355J2+N (St. 52.3) Bwsdpfjx Eqmxjx Afmsp * ADR suction/pressure tank vehicle K 1.0-13.5 / 36 PESP * 14,500 litre tank capacity (air volume) * 10,000 litre sludge volume | 3,500 litre emulsion chamber * 1,000 litre flushing water capacity (non-pressurised) * Discharge with ejector piston Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 HP / 338 kW * 2,200 Nm * EURO 6 * Fuel capacity approx. 500 l * Cab colour MB 9147 Arctic White * 2x LED beacons on cab * Rear view camera * Navigation * Air conditioning * Cool box Vacuum system? CVS VacuStar W1300, approx. 1,200 m3/h at 400 mBar * Suction hose cassette with telescopic boom and 20 m DN100 High-pressure system? Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HP hose reel for 60 m DN 13 * Approx. 60 m flushing hose DN 13 Special features ADR version L4BH, type class FL incl. EX/II, EX/III and AT * Suction connection pre-piston chamber DN100 remote-controlled * Manhole DN500 on the left side * HP gun * Acoustic insulation on both sides in front of the pumps * LED surrounding area lighting * Radio remote control with two batteries * Tilting scrap box * Rear view camera * Ladder with holder and anchor points * Advertising boards left and right on tank Technical Data: GVW 26,000 kg * Length 10,700 mm * Height 3,800 mm * Width 2,550 mm * Wheelbase 3,900 mm Conclusion: A professionally equipped Mercedes-Benz Actros 2546 with a high-performance KROLL ADR suction/pressure tank body, VacuStar W1300, Speck high-pressure system, comprehensive comfort and safety features, and a telescopic DN100 suction arm. An ideal solution for industrial, sewer, and emulsion suction projects where performance, efficiency, and reliability are essential. For further detailed information and/or photos, please contact us directly. You will find a large selection of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is required to independently verify the condition and equipment of the goods. The sale is made exclusively under our terms and conditions and with exclusion of any warranty.

Condition: good (used), Year of construction: 2010, operating hours: 5,590 h, axle configuration: 4x4, fuel type: diesel, color: yellow, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 8.120 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.730 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Bwodpoyxybrefx Afmjp Other information Remanufactured: Yes Delivery terms: EXW Max. horizontal reach: 1060 m Max swing of arm in degrees: 180 Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 7,6x2,38x2,2 Latest inspection: 2026-03-30 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information