Low loader

Goldhofer THP SL

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Lredpfx Adjwlip Ej Nsg Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: like new (used), Year of construction: 2025, Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Lodpsgmdnfsfx Ad Njrg

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, General information Field of application: Construction Serial number: Drivetrain Drive: Wheel Weights Lrodjvl Dl Aepfx Ad Nsg Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, mileage: 280,163 km, lifting height: 35,500 mm, Year of construction: 2014, operating hours: 7,979 h, General information Field of application: Construction Serial number: 782002 Drivetrain Drive: Wheel Weights Empty weight: 31.787 kg Functional Lifting capacity: 15.000 kg Lrjdpfx Adevf A Trj Njg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x0x0 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 17,840 mm, loading space width: 1,750 mm, tire size: 9.50R17,5, wheelbase: 1,350 mm, color: blue, Year of construction: 1992, Color: blue Payload: 43,600 kg Extendable Manufacturer: Goldhofer Type: STZ-VL4-44-80 Extendable Low Loader Chassis number: WG0STZV47N0020238 Year of manufacture: 1992 Weights: - King pin load: 24,000 kg - Axle load: 10,000 kg - Total axle load: 40,000 kg - Gross vehicle weight (GVW): 64,000 kg - Unladen weight: 20,400 kg - Payload: 43,600 kg Axles: - Axle manufacturer: BPW - Air suspension - All axles with hydraulic steering - High/Low valve - ABS braking system - Tyre size: 9.50R17.5, double mounted - Load index: 143/141 J Dimensions: - Length: 17,840 mm - Extensions: 4,000 mm - Maximum extended length: 21,840 mm - Loading platform length: 8,000 – 12,000 mm - Loading platform width: 2,750 mm - Height: 600 mm (+/-100 mm) - King pin height: 1,300 mm Additional Information: - Hydraulic connections for truck hydraulics - Lashing rings - 2x spare wheels - Detachable gooseneck - Hydraulically operated gooseneck - Working lights - Rear bumper with lights - King pin 3.5” - Schübler lubrication system - Outriggers for loading platform widening - Fixed ramps on loading platform - High/Low valve = Further Information = General Information Year of manufacture: 1992 Axle Configuration Ljdpfouu Hbhox Ad Nerg Tyre size: 9.50R17.5 Axle brand: BPW Rear axle 1: double tyres, max axle load: 10,000 kg, steered Rear axle 2: double tyres, max axle load: 10,000 kg, steered Rear axle 3: double tyres, max axle load: 10,000 kg, steered Rear axle 4: double tyres, max axle load: 10,000 kg, steered Weights Unladen weight: 20,400 kg Payload: 43,600 kg Gross vehicle weight: 64,000 kg Functional Extendable body: Yes Condition Technical condition: very good Visual condition: very good Damages: none Financial Information Price: On request Further information Please contact Stefan Schaapveld for more information.

Condition: excellent (used), axle configuration: 3 axles, total length: 15,700 mm, total width: 2,750 mm, total height: 1,290 mm, suspension: air, tire size: 245/70R17.5, color: orange, Year of construction: 2010, Color: Orange Loading capacity: 40,600 kg Loading floor height: 54 cm Extendable Braked Main Features Manufacturer: Goldhofer Model: STZ VKL3 34/80 A Chassis Number: WG0STZV3590030501 Year of manufacture: 2010 Weights/Loading Capacity Fifth-wheel load: 24,000 kg Axle load: 11,200 kg Total axle load: 33,600 kg Gross vehicle weight (GVW): 57,600 kg Unladen weight: 17,000 kg Payload: 40,600 kg Axles Axle make: BPW ECO Air suspension All axles hydraulically steered High/Low valve AGS / ALB / ABS Tires: 245 / 70 R17.5, twin mounted Load index: 143/141G Dimensions Length: 15,700 mm – 26,000 mm Loading floor length: 6,600 mm Extension: 4,300 mm Extension beams: 6,000 mm Max. loading floor length: 16,900 mm Loading floor width: 2,750 mm Beam thickness: 380 mm King pin height: 1,295 mm Additional Information Operated via truck hydraulics Lashing rings Hydraulically operated gooseneck Detachable gooseneck Oversize load marker boards Rear bumper with lights King pin: 2.0'' Central lubrication Removable floor panels 4x extension crossbeams Toolbox at gooseneck = Further Information = General Information Year of manufacture: 2010 Axle Configuration Tire size: 245/70R17.5 Axle make: BPW ECO Suspension: air suspension Rear axle 1: twin tires; max. axle load: 11,200 kg; steered Rear axle 2: twin tires; max. axle load: 11,200 kg; steered Rear axle 3: twin tires; max. axle load: 11,200 kg; steered Weights Unladen weight: 17,000 kg Lredpfx Adjuu Hife Nsg Payload: 40,600 kg Gross vehicle weight: 57,600 kg Functional Loading floor height: 55 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports Lodsrgzv Nepfx Ad Nerg * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, mileage: 175,730 km, power: 397 kW (539.77 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - Differential lock - Remote central locking - Refrigerator - Drawbar coupling - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox - Central lubrication system = Remarks = Volvo FH 540 10x4 Dynamic steering. Hub reduction. Work remote. Erkin ER 245.000 L 7+5 Jib. Winch. Scanreco radio remote control. Central lubrication. 6 x hydraulic outriggers. 7 x hydraulic extensions on main boom. 5 x hydraulic extensions on fly jib. Max hydraulic reach: 36.8 m. Max lifting capacity: 45,000 kg. 4.80 m - 46,000 kg 6.80 m - 35,600 kg 9.60 m - 24,000 kg 11.50 m - 19,000 kg 13.80 m - 14,000 kg 15.90 m - 12,500 kg 18.30 m - 11,000 kg 20.70 m - 9,000 kg Manual extension: 23.60 m - 7,200 kg Jib -5: 24.30 m - 4,200 kg 27.10 m - 3,460 kg 29.40 m - 2,900 kg 31.70 m - 2,460 kg 34.20 m - 2,026 kg 36.80 m - 1,700 kg Manual extension: Lredswt T A Eopfx Ad Nsg 40.20 m - 1,000 kg 43.60 m - 800 kg 46.80 m - 350 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steered; Tread left: 75%; Tread right: 75%; Suspension: leaf springs Front axle 2: Tire size: 385/65R22.5; Steered; Tread left: 70%; Tread right: 70%; Suspension: leaf springs Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tread left inside: 30%; Tread left outside: 30%; Tread right inside: 30%; Tread right outside: 30%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tread left inside: 80%; Tread left outside: 80%; Tread right inside: 80%; Tread right outside: 80%; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tread left: 70%; Tread right: 70%; Suspension: air suspension Weights Unladen weight: 53,320 kg Payload: 680 kg Gross vehicle weight: 54,000 kg Functional Crane: Erkin World Power Financial Information Price: On request Identification Model number: FH 540 10x4 / ERKIN 245.000 L 7+ = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, however, no rights can be derived from the texts provided.

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Suspension on 3rd and 4th axle: air Lrsdpfx Adjwphixs Nsg 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Precisely cut out panels in side...

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Lredpfx Aewk Aw Hsd Nsg Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information