Low loader semitrailer

Goldhofer STZ H6 75/80 AA Tieflader / Swiss-Vehicle

Condition: used, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low-bed trailer, low-loader trailer, low-bed trailer for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Front axle load: 8,000 kg Middle axle load: 8,000 kg Rear axle load: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with frame removed and tarpaulin pushed forward) - Spare wheel mounted on the front wall - Separate lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – extendable in multiple stages - Very robust lashing points on the outer frame and in the centre of the vehicle - ALU loading ramps: length 268 cm, width 410 mm, height 130 mm (surcharge 2,000 EUR net) Pjdpfjt N Antox Adnjrd This vehicle was purchased by us as a new vehicle, is first-hand, is registered and currently in use by us. Very good condition.

Condition: ready for operation (used), Year of construction: 2017, Two MAN and Mercedes-Benz truck are available. 1) Diesel truck Mercedes-Benz 970.22, first registration: 09.2012, length: 7875mm. 2) Diesel truck MAN TGX 18.500, first registration: 12.2017, max. total weight: 44t, emission standard: Euro 6 (E), engine power: 412kW. Documentation available. On-site inspection possible. Individual sale possible. Pedpfx Aowmqxdjdnsrd

Condition: excellent (used), axle configuration: 3 axles, total length: 15,700 mm, total width: 2,750 mm, total height: 1,290 mm, suspension: air, tire size: 245/70R17.5, color: orange, Year of construction: 2010, Color: Orange Loading capacity: 40,600 kg Loading floor height: 54 cm Extendable Braked Main Features Manufacturer: Goldhofer Predpfx Aeuu Hifednod Model: STZ VKL3 34/80 A Chassis Number: WG0STZV3590030501 Year of manufacture: 2010 Weights/Loading Capacity Fifth-wheel load: 24,000 kg Axle load: 11,200 kg Total axle load: 33,600 kg Gross vehicle weight (GVW): 57,600 kg Unladen weight: 17,000 kg Payload: 40,600 kg Axles Axle make: BPW ECO Air suspension All axles hydraulically steered High/Low valve AGS / ALB / ABS Tires: 245 / 70 R17.5, twin mounted Load index: 143/141G Dimensions Length: 15,700 mm – 26,000 mm Loading floor length: 6,600 mm Extension: 4,300 mm Extension beams: 6,000 mm Max. loading floor length: 16,900 mm Loading floor width: 2,750 mm Beam thickness: 380 mm King pin height: 1,295 mm Additional Information Operated via truck hydraulics Lashing rings Hydraulically operated gooseneck Detachable gooseneck Oversize load marker boards Rear bumper with lights King pin: 2.0'' Central lubrication Removable floor panels 4x extension crossbeams Toolbox at gooseneck = Further Information = General Information Year of manufacture: 2010 Axle Configuration Tire size: 245/70R17.5 Axle make: BPW ECO Suspension: air suspension Rear axle 1: twin tires; max. axle load: 11,200 kg; steered Rear axle 2: twin tires; max. axle load: 11,200 kg; steered Rear axle 3: twin tires; max. axle load: 11,200 kg; steered Weights Unladen weight: 17,000 kg Payload: 40,600 kg Gross vehicle weight: 57,600 kg Functional Loading floor height: 55 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm Pjdpergzv Nefx Adnsrd LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, axle configuration: > 3 axles, Year of construction: 2025, Further information here: Prodsv D Abmepfx Adnjd

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no Predpfolhn Afox Adnsd ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: used, overall weight: 92,000 kg, axle configuration: > 3 axles, first registration: 08/2006, loading space length: 19,000 mm, loading space width: 3,000 mm, loading space height: 815 mm, total width: 3,000 mm, Equipment: ABS, Goldhofer STZ-H6-57/80A telescopic low loader for wagon transport----                                     Approval          Technical 1 Speed:     80km/h                 65km/h Fifth wheel load:               23,000kg               26,000kg Rear axle load:       10,000kg             11,000kg Total weight:     83,000kg               92,000kg Payload:                52,500kg               61,500kg Own weight: (without accessories):           30,500kg ----Gooseneck: Length: 4,000mm Width: 2,480mm Height: 235mm Seat height: 1,350mm DLR front: 1,420mm DLR rear: 2,700mm King pin 3.5 inches Bevel: bevelled 10 degrees Corners front: bevelled 45 degrees Floor covering: spruce 50mm Seat supports: mechanical Width with side walls: 2,550mm Hydraulic STZ gooseneck with external supports, hydraulically liftable and lowerable with mechanical downpipe supports and hydraulic support cylinders hydromechanical forced steering (2-circuit steering) in flat design (height 235mm) with adjustable guide elements and THP steering cylinders. ----Loading area: Type: Platform Prodolhn Aispfx Adned Liftable: no Length: 13,000mm Width: 3,000mm Floor covering: sheet metal/spruce 50mm Wheel recesses: no Wider extensions: no Extendable: simply telescopic Length1: 10,000mm Loading heights (loaded) Loading height 1: 815mm Loading area telescopic, designed as an outer and inner tube construction, with 1,070mm long, fixed loading area section at the front. Bolt-link coupling integrated in the fixed loading area section for coupling boiler bridge extension supports, the square rails welded on by us serve as rail tracks in the track widths 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension steps by spring-loaded cylinders and conical bushings Loading area height on the frame center tube (outer tube) approx. 815mm (+/- 130mm) Loading area height on the enclosed rail elements approx. 790mm (+/- 130mm) ----Rear chassis: Chassis type: Standard Loading height: 815mm Width: 3,000mm Wheelbase: 1,360mm Floor covering: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no ----Axles: Number of axles: 6 Lift axle: see accessories Axle type: cranked steering knuckle Axle compensation: hydraulic Axle make: BPW/Eco Driving positions: 1 Axle stroke (1) +/-: 130/130mm Axle stroke (2) +/-: 0/0mm Raising/lowering valve: Yes 1st axle can be suspended pneumatically with lifting bellows ----Steering: Number of steering axles: 6 Steering axle arrangement: all steered Steering angle max: 45° Steering type: Hydr. 2 circles----Tires: Dimension: 235/75 r 17.5 143/141 J Tires. Type: twin Rim type: discs Rim centered: centered ----Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS del: No Parking brake: spring-loaded EBS: No ECAS: No Remark: Brake calculation no.: GH 4324S ----Chassis remark: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow cross arms in between (ALU covers see accessories below) Control elements protected on the left in the direction of travel Rims 17.5x 6.75 Cranked axles!!! ----Rear of vehicle: Design: Standard 90° Ramp fastening: see accessories Floor covering: Sheet metal Overhang from last axle: 1,300mm Support: see accessories ----Load securing: Lashing rings Number: 5 Loadable up to: 10 tons per piece Arrangement: 2 pairs on the SH                         3 pairs on the LF----Rear extension: Max. load capacity 15,000kg with a

Condition: excellent (used), axle configuration: > 3 axles, total length: 14,620 mm, total width: 2,520 mm, suspension: hydraulics, tire size: 245/ 70R17.5, color: yellow, Year of construction: 2009, Color: Yellow Loading capacity: 63,680 kg Extendable Main Features Manufacturer: Nooteboom Model: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000090001480 Year: 2009 Weights / Loading Capacity King-pin load: 25,000 kg Axle load: 10,000 kg Total axle load: 60,000 kg Gross Vehicle Weight (GVW): 85,000 kg Unladen weight: 21,320 kg Payload: 63,680 kg Axles Axle brand: SAF Hydraulic suspension All axles with hydraulic steering Axle 1 and axle 6 liftable WABCO brake system with EBS Tires: 245/70 R17.5 | Load index 146/146F Dimensions Length: 14,625 mm Extension (double): +8,800 mm +8,800 mm Maximum extended length: 32,225 mm Loading platform length: 11,520 mm Maximum loading platform length: 29,120 mm Loading platform width: 2,520 mm Height: approx. 1,050 mm Additional Information NATO plug Electro-hydraulic pump for trailer functions Hydraulically operated gooseneck Hydraulically liftable axles Cable remote control Spare wheels and spare wheel holders Double extendable Lashing rings Manual landing gear Rear bumper with lights King-pin 2.0" and 3.5" Central greasing system with 2 pumps Podpfov Rbtzox Adnjrd = Additional Information = General Information Year of manufacture: 2009 Axle Configuration Tyre size: 245/70R17.5 Axle brand: SAF Suspension: hydraulic Rear axle 1: Twin tyres; Lift axle; Max. axle load: 10,000 kg; Steering axle Rear axle 2: Twin tyres; Max. axle load: 10,000 kg; Steering axle Rear axle 3: Twin tyres; Max. axle load: 10,000 kg; Steering axle Rear axle 4: Twin tyres; Max. axle load: 10,000 kg; Steering axle Rear axle 5: Twin tyres; Max. axle load: 10,000 kg; Steering axle Rear axle 6: Twin tyres; Lift axle; Max. axle load: 10,000 kg; Steering axle Weights Unladen weight: 21,320 kg Payload: 63,680 kg Gross vehicle weight: 85,000 kg Functional Platform height: 105 cm Extendable chassis: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Further information Please contact Stefan Schaapveld for more details.

Condition: new, axle configuration: > 3 axles, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: Kingpin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Payload: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7 steering axles (axle 2 fixed) First two axles are liftable Drum brakes ABS SN 3020 brakes, with sensors Tyres: 245/70 R17.5 twin tires Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Max. extended length: 37,900 mm Loading deck width: 3,990 / 3,450 mm Loading deck height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional equipment: NATO plug Hydraulically foldable ramps Outriggers and planks for widening the loading platform Pjdpsuu E Tiofx Adnord Electro-hydraulic pump for trailer functions Spare wheel with holder Work lights Rear bumper with lights 2.0” kingpin Central greasing system Lashing rings Wooden loading platform Oversize load marker boards Remote control General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin tires (143/141J) Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Twin tires; lift axle; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: Twin tires; lift axle; max. axle load: 12,000 kg; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axles 3–8: Twin tires; max. axle load: 12,000 kg each; steered; tyre tread all positions: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg Gross vehicle weight: 134,000 kg Functional Loading platform height: 105 cm Extendable body: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial Information Price: on request Further information Please contact Stefan Schaapveld for more details...

Condition: used, mileage: 76,270 km, power: 471 kW (640.38 HP), first registration: 10/2020, overall weight: 41,000 kg, fuel type: diesel, axle configuration: > 3 axles, next inspection (TÜV): 12/2025, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Plung at WSK, electric glass sunroof, electrically adjustable and heated mirrors, control module located above the sleeper bed, Net-Black decorative trim on the dashboard, electric sunblind, smoker package, reverse warning system, cornering light, 4 work lights, LED daytime running lights, 2 rotating beacons, MAN sound system, video function with USB/SD interface, navigation (Europe SD card), DAB+, AUX/USB, Rio Box, MAN Smart Link, pre-installation for rear-view camera, Rockinger 56 EU tow hitch mounted below, JOST JSK 38 C 3.5" fifth wheel coupling (loose), 3-stage hydraulic system for heavy haulage, additional hydraulic connections at the end of the frame and at the front cross member for heavy transport. Prodpfslxw Auex Adned