Scissor lift

Genie GS 1532 | 2007

Condition: used, Year of construction: 2007, overall grade 1-5 (1 bad, 5 like new): 4/5 certificates: CE, TÜV Aichi rm04b Year 2007 Hours low Working height 6 m Weight 650kg 0.78 x 1.30m Knsdpfxoxbr U Hj Ah Esb working height: 600 cm Type: Electric Total weight gvw: 650 kg Maximum lifting capacity: 200 kg Type of drive: Caterpillar drive Maximum lifting height: 600 cm Production country: Japan Urenstand: Laag Werkhoogte: 6 meter Gewicht: 650 kilogram LxB: 0.78 x 1.30m Certificaten: CE, TÜV

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor Kjdpet Drkyofx Ah Eonb -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: new, functionality: fully functional, mileage: 0 km, color: red, empty load weight: 2,050 kg, maximum load weight: 650 kg, lifting height: 3,330 mm, digging bucket width: 1,160 mm, Year of construction: 2025, Equipment: pallet forks, standard shovel, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket volume (m³): 0.25 Maximum steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Full cycle time (s): 8 Operating time (h): 6 Speed (km/h): Slow: 10 km/h, Fast: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Nominal voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Nominal speed (rpm): Slow: 800 rpm Fast: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Kedpfx Ahsw Ufplo Ejnb Cylinder size (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the exclusive stationary distributor of the Kingway brand in Germany. Here you can inspect and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a vast selection of machines in stock, with around 100 units available at any given time. We deliver machinery throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide our customers with access to all spare parts as well as a mobile service. KINGWAY DEUTSCHLAND e. K. Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Knodpfx Asrfbnmsh Esb Operating hours: approx. 53,000 Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB Knedpjtr U Hlsfx Ah Eob → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, Year of construction: 2026, Container rotating device, welding table, welding rotary table, roller stand 1000 kg load capacity Knjdpfx Ahogu Edvj Esb Distance and rollers adjustable with foot-operated remote control Speed continuously adjustable from 80 to 1600 mm/min. Diameter 20 mm to 700 mm.

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE Ksdpeulzchofx Ah Ejnb including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm Knodpforblx Hex Ah Esb - HP tractor: 40 - 100 HP

Condition: used, Year of construction: 2002, fuel type: gas, Number of working hours 3184 h Knedpfx Ahjwx R T Es Eob weight max. 8 t weight of the machine ca. 13400 kg

Condition: new, Year of construction: 2020, Cantilever racking, single-sided, 6.30m high, 1.20m arms, 900kg per arm – new: Knodpfx Aefivg Sjh Eob Price ex warehouse including loading! 1 racking unit with 4 uprights €3,732.00 (net)! Transport costs within Germany (excluding islands): €490.00 (net)! A cantilever racking system, hot-dip galvanized, consisting of: Racking uprights, single-sided, approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable racking arms each Load capacity with load center of gravity at 600 mm: 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level: 4 x 900kg = 3,600 kg Profiles: Frame: IPE220, Arms: IPE 100 with longitudinal and diagonal braces e = 1300mm, standard is 1.30m. Other standard lengths available in stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge will be added to the stated price for lengths from 1.50m onwards! Special sizes (different center distances) are also available on request, but they also incur a surcharge and have a longer delivery time as they have to be manufactured to order! If you do not specify any different center distances, we will supply the racking with a center distance of 1.30m. In this case, the length of a racking row with 4 uprights (3 bays) is approx. 4m. Delivery with all screws and nuts (shipping within Germany via parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) can be selected! Please contact us!