Axial fan 2.79/1.36 kW 890/700 rpm

Güntner Ø 1000 mm

Condition: good (used), Year of construction: 1992, machine/vehicle number: 9207102, Offer 12001 Ledpfxsi Hpmts Aiiohh Technical data: - Material thickness: 1.25 mm - Max. overhang: 180 mm - Center distance between rollers: 63 mm - Max. material thickness with a tensile strength of 40 kg/mm²: 1.25 mm - Working speed, approx.: 6 + 12 m/min - Drive: 400 V / 0.7 / 0.85 kW - Space requirement, approx.: W 550 x H 1250 x D 1000 mm - Weight, approx.: 120 kg - Includes: - E - foot pedal

Condition: new, plate thickness 0,8 mm Lsdpfjht R Hmox Aiishh throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Ljdpew S Tyaefx Aiishh

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty . Ljdepqxnxspfx Aiishh

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t Lhedpoupxcgefx Aiieh dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW Lodpfsxlcufsx Aiishh 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen with riving knife with saw blades with templates Lsdpfoqpdi Uex Aiijhh with fence immediately available Location: Austria, near Klagenfurt

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,150 mm, total length: 1,120 mm, total height: 2,400 mm, warranty duration: 3 months, empty load weight: 1,360 kg, Used vertical Atlas / Sabroe V316 AFT flake ice machine. Complete with 1 ICME T71B4 - 50 Hz - 0.37 kW - 1380 RPM electric motor and a control panel. The Sabroe V316 AFT produces between 8,000 and 19,000 kilograms of flake ice per 24 hours. The machine can produce different ice thicknesses by adjusting the speed of the rotating drum. Weight: 1,360 kg. Specifications Brand: Sabroe Ledpov Uba Nsfx Aiishh Type: V316 AFT Capacity: 8,000 to 19,000 kg/24h Refrigerant: Ammonia or Freon Dimensions: 1120x1150x2400 mm (LxWxH) Year of manufacture: 2000

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 Ledpst Ult Ajfx Aiiohh -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides -Brake: 55 Nm -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total height: 2,120 mm, DGUV certified until: 06/2027, warranty duration: 6 months, total width: 1,100 mm, total length: 1,175 mm, input voltage: 400 V, power: 1 kW (1.36 HP), input frequency: 50 Hz, input current: 10 A, electrical fuse: 10 A, Lifting tipper mobile intended for lifting and tilting of boilers for boiler sizes from 60 - 120 liters Mobile stainless steel design Stepless electrical adjustment Tilting height up to 1.7m easy change of location Connection 400V, 16A-CEE plug Lsdpfx Asm Tr Ixjiishh new device with 12 months warranty We have a TOP selection of bakery machines!