Hydraulic unit 11 kW/1450 rpm

Flutec Battenfeld PT-350/4.0/M/ FL086-E

Condition: new, Continuous power: 60 kW / 75 kVA Engine: Fawde 4110/125Z-09D, 4 cylinder, water-cooled Connection: 1x32A, 1x64A 1x220V Sockets or circuit breakers, optional 125A socket Frequency: 50Hz Voltage: 400/230V including electronic speed control, AVR, battery charger, preheater Comap AMF8 control with generator network grid feed in Itjdpfx Abjh R Tm Ijnek RCD protection

Condition: good (used), Year of construction: 1998, Battenfeld 600/200 CDC Unilog 4000 Closing force 60 tons Itjdpfx Asg Emvhebnjk Year of manufacture 1997 Screw diameter 30 mm Shot weight approximately 90 g

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Ijdpek Rnq Nefx Abnjtk Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: used, Year of construction: 2005, power: 37.6 kW (51.12 HP), input voltage: 6 V, temperature: 320 °C, inner dimension length: 120 mm, inner dimension width: 80 mm, inner dimension height: 17 mm, total length: 150 mm, total width: 135 mm, total height: 215 mm, overall weight: 550 kg, number of chambers: 4, fuel type: electric, Miwe Condo Co.4.1208 with extractor hood, baking chamber 120x80xHx17 cm, electric, power 37.6 kW, 400/230V. Iedoy N Tbgjpfx Abnstk

Condition: defective spare-parts repository (used), Year of construction: 2007, functionality: not functional, For sale is an injection molding machine of the brand Netstal and the type Synergy 1000-230 After a transportation accident, the control cabinet is completely defective. For this reason, the machine is offered as a spare parts carrier or for repair. Machine would be fully operational and in good condition Technical data: Operating pressure: 210bar, Injection force: 182kN, clamping force: 1000kN, Opening stroke: 0-400mm, mold installation height: 450-750mm Total weight: 7200 kg Operating hours: approx. 53,000 Itjdpfx Asrfbnmsbnsk Available from March 2024 First fillings with hydraulic oil can be ordered from us On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Iodsmhhypjpfx Abnstk - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, NEW NEW Convection oven Unox Bakertop X 10 Digital ID NEW NEW Convection oven for 10 trays, 600 x 400 Unox oven, intelligent performance Touch panel with 1000+ programs Isdpfjyaf Dmsx Abnstk Core temperature probe USB port Top model with AI Only available from us, DGUV V3 certified Connection: 400V, 32A-CEE plug Water connection: 3/4 inch, water drain: DN 40 Dimensions: 860 x 1018 x 1219 mm, W x D x H Oven NEW & SAB tested 12 months warranty + spare parts service Option: Pure water filter Baking trays Lievox proofing cabinet Ethernet connection DDC.App Exhaust hood with condensate condenser Spray & Rinse cleaner Service package Base frame Maintenance contract Delivery service Instruction and commissioning Visit our large showroom!

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Isdpfx Ajw Tbtkobnotk Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Year of construction: 2004, condition: good (used), For sale is an injection molding machine from Krauss-Maffei, model 80-220C2. Iodpsiq U Szofx Abnotk Year of manufacture: 2004 Machine number: 61004457 Clamping force: 80 tons Equipment: - Cylinder D35 - 1 Hydraulic core pull - Pneumatic needle valve - Core pull device on the opposite side - 48,000 operating hours. Inspection possible by appointment. The machine is powered on and ready for immediate use. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine buying/selling PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: refurbished (used), Krauss Maffei injection molding machine 25 tons Year: 2000 Itedpfxsrdg Tpo Abnjk IPC not working (see map)