Shrink Film Wrapping Machine

Fischer Maschinen SFV/800

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: Knodpjtynpxjfx Agrsd - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm Kjdpfxsh Ellzs Agrsnd 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: new, Type 1000-2S Working width 1000 mm Min.working length 400 mm Knjdpfxjm Dr Rnj Agrsd Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Kedpfx Ajq Auhdjgrjnd Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Year of construction: 2005, condition: good (used), machine/vehicle number: A5.01077.0181, Stationary high pressure pump unit Hammelmann HDP 77 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Working pressure: 650 bar Delivery rate: 45 l/min. Drive speed: 1500 rpm. Driving power: 54 kW with SIEMENS electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.400x720x1.160 mm weight: approx. 800 kg Year of manufacture: 2005 Condition: In good used condition. Kedpfeix I Ndex Agrond

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Height of horizontal: - Conveyor belt width 600mm (extendable) Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Knjdpoi Igzfofx Agrjd Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm

Condition: used, Year of construction: 2000, Debarking unit type VK 32 Knodpfxewwlade Agrsd !! Sale on behalf of customer !!

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available Knsdpfxsh E Sgho Agrjd

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m Kodpjcubatjfx Agrend - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: new, Year of construction: 2023, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Knjdpfx Agsk E Hmtorsd Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm