Low loader semitrailer

FAYMONVILLE Multimax Satteltieflader (2+2) - nachlaufgelenkt

Condition: new, overall weight: 48,000 kg, maximum load weight: 36,410 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°, for tractors: 4 x 2, 6 x 2, and 6 x 4 * Front wall made of steel, removable, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection panel with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * Outer beams on the gooseneck with mounting holes for bolted lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of recessed lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm hardwood flooring over the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) * 1 pair of stakesockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (inside the chassis beam) Gksdsxc Axrjpfx Afijc Loading platform * Extendable loading platform, approx. 8,800 mm long with chamfer at the rear approx. 500 mm x 10° * Recess in the platform including the chamfer for receiving the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring approx. 50 mm thick on the loading platform, interrupted only between the axles * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded securing profiles at approx. every 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame of the loading area (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, also serving as extension planks * Hardwood flooring on the loading platform chamfer * Painted-on sand coating on the outer frame of the loading area as well as on the chequered plates of the platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lockout, activated via reverse gear and manually * Air suspension with lift and lower valve * 1st axle with start-up aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyre configuration * TPMS tyre pressure monitoring system in accordance with ECE R 141 Lighting * 1 LED work light each on the left and right in front of the axles, wired to the tractor unit Loading ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M, a pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide * Hardwood covering * Hydraulically foldable ramp tips * Ramps can be moved individually hydraulically approx. 235 mm outward and approx. 215 mm inward * Hardwood covering on the platform chamfer * Ramp with hardwood covering Brake system WABCO EBS-E according to EU regulations Lighting system * 24-volt lighting system * ASPÖCK-NORDIK full LED

Condition: used, overall weight: 58,000 kg, maximum load weight: 45,830 kg, axle configuration: > 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, Year of construction: 2024, Equipment: ABS, You can find our entire vehicle stock, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck * SNT design for optimizing the loading deck length * Length approx. 4,100 mm, front with beveled corners approx. 400 x 400 mm * Rear with slope approx. 1,000 mm x 10° * Steel front wall, removable, approx. 400 mm high * Removable aluminum rear wall on gooseneck, approx. 400 mm high, anodized finish Gksdpsxcdm Dsfx Afisc * 2 pairs of lashing rings (LC 16,000 daN) mounted inside the gooseneck’s outer beams, rotated approx. 45° * 1 pair of lashing rings (LC 10,000 daN) at the front inside the gooseneck’s outer beams, rotated approx. 45° * 2 pairs of stake pockets recessed into the gooseneck for plug-in stakes approx. 100 x 50 mm * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * 2 pairs of lashing rings with retaining spring, suspended on the gooseneck’s outer beams (LC 5,000 daN) * On the gooseneck: 1 pair of removable aluminum sideboards, approx. 1,200 mm long, approx. 400 mm high, anodized finish * 3.5-inch kingpin Loading Platform * Telescopic loading platform, length approx. 9,300 mm, with rear slope approx. 500 mm x 10° * Recess in the slope and extending into the platform to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood floor, interrupted between axles, approx. 50 mm thick (increases coefficient of friction) * Platform locking with conically welded locking profiles every approx. 250 mm * Includes tension plate * 1 pair of recessed flat lashing rings in the fixed front part of the loading deck (LC 10,000 daN) * 9 pairs of recessed lashing rings on the outer frame of the platform, foldable outward (LC 10,000 daN) * 5 pairs of stake pockets recessed in the outer frame, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail in the fixed support of the platform, for plug-in stakes approx. 100 x 50 mm * Wheel recesses with square climbing strips, approx. 15 x 15 mm * Wheel recesses in front of the axles open continuously up to the gooseneck’s cross member, approx. 1,310 x 700 x 410 mm (L x W x D) * Wheel recesses between the 2nd and 3rd axles, approx. 1,310 x 700 x 250 mm (L x W x D) * Aluminum covers for wheel recesses, which can also be used as bridging elements for the extension OR as widening planks * In front of and behind the rear wheel recess, 1 pair of flat lashing rings (LC 10,000 daN) each in the outer frame of the platform * WADER container pockets in the platform and gooseneck for transporting 2x 20' containers * 1 above the gooseneck with long-goods support * 1 in the platform; extensions (galvanized) extendable by approx. 230 mm per side * Detachable widening planks, steel-framed * 4 pairs of plug-in WADER container locks * Long-goods support in the recessed deck level with the gooseneck, required for transporting 2× 20' containers * 1 pair of aluminum VFR 120 ramps, approx. 2,400 x 620 x 120 mm (L x W x H) Chassis * BPW axles and suspension * 1st and 2nd axles rigid * 3rd and 4th axles self-steering with electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF, dual tires * 1st axle with automatic lift axle function Brake system WABCO EBS-E compliant with EU regulations Landing Legs * Me