Crushing plant

FABO Crushing Plant Stationary Crushing Plant 750 TPH

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Rbsdpfx Ahevwlqqozjt Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, - Primary impact crusher, Brand Laron Model IM 16 - Complete assembly, available as mobile or static unit. - New rotor bearings - New rotor blow bars - Front jaw (impact plate) in near-new condition - Production capacity: 800 t/h - Feed opening: 2320 x 1700 mm. Motor: 600 HP Rbodpjimwg Hjfx Ahzjt - New bearings and supports - New rotor blow bars - Apron feeder: width 2000 mm, length 10,000 mm. Gearbox and 40 HP motor. Feeder condition: semi-new - Disc pre-screen: width 2000 mm, diameter 1000 mm. Gearbox and electric motor - Hopper with 40 m³ capacity. Bolted and sectional for easy transportation - The entire assembly is mounted on a chassis with tractor head coupling and can be transported on dolly axles. We also have secondary hammer mills, screens, and conveyor belts available to complete a plant.

Condition: good (used), Offered is a used double toggle jaw crusher from Krupp. Good condition, fully operational. 500 x 300 mm, 15 kW, new tools. The motor is currently being overhauled. Rsdpfx Ahswy U Icjzjbt

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Rodpfsra A E Uex Ahzebt Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Year of construction: 2001, condition: good (used), HSM-500.1_VL PRESS PAPER PRESS FILM PRESS BALER ready to use good CONDITION used & good / see photos model: HSM 500.1 VL machine no. 6135.244.P serial no. 220109689 pressing pressure 50 tons V 400; Hz 50 KW 7,5 Amp. 15,5 Pressing force 6 tons Year of manufacture 2001 more presses in our other offers article used and good / roughly cleaned (plug in and go ) dimensions: on request !!! Other photos are for further use possibility. All items seen in photos also available from us. Price quotation net per piece for pickup from stock 47441 Moers current stock 1 piece Viewing is expressly offered. more technology in stock see photos or ask by phone General: We offer here from various acquisitions articles, which we describe as well as possible, as well as set meaningful photos. Further details about the article can not be made. We offer the possibility of Tuesday and Thursday in the time between 9 and 16 o'clock after telephone appointment to visit. If necessary, the article can be taken away immediately. Answers to this article we can offer due to time constraints only if you provide us with a phone number when you request. This offer, unless specifically described, is USED GOODS. Any packaging may be damaged. Items have been visually inspected and are as far as technically ok. Rbodpfolc Du Nox Ahzet All offers ex stock 47441 Moers. If you want shipping, please contact us to discuss packaging and shipping costs. Call with interest gladly by. all dimensions are approximate Errors in the description expressly reserved.

Condition: good (used), functionality: fully functional, Hard rock splitting plant - essentially consisting of: Feed hopper SVEDALA H-36 cone crusher Dosing hopper Rsdsufih Depfx Ahzjbt SANDVIK H-200 cone crusher plant, with pre-screening machine Dosing hopper with discharge belt 2 x double deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveyor and stockpiling belts Complete electrical installation with control cabinet in container

Condition: ready for operation (used), HSM V-Press 860 Baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressure: 63.46 N/cm² Drive motor power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Loading aperture (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 Plus, year 2013-2015, price: €7,500 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 Plus, year 2019, price: €9,000 HSM V-Press 860, brand new, ex-display, year 2020, price: €13,000 Bale binding: 4-fold wire tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (approx.): 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling aperture (mm): 1200 x 565 Cycle time (seconds): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 Plus B, year 2020, price: €14,000 Press force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Rbjdpfx Ajra Rbgohzjt Filling opening (W x H): 1500 x 651 mm Bale size (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Suitable materials: foil, cardboard Idle cycle time: 25 s

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing Rbsdpfx Ajur Ravjhzet

Condition: good (used), IBAG Cone Crusher - 3x unit The ad is being edited, more detailed specifications & Plant description will follow. Rbsdpfx Ahst Hgf Dszjt Transport can be organized if required. Welcome to Oussman-Machinery Please feel free to contact us for any further information. We speak: english, german, arabic & french.

Condition: ready for operation (used), Cone Crusher Krupp Brand: Krupp *Type: 90-8 Rjdjrbdlhopfx Ahzsbt Year of manufacture: 2000 Incl.: E-motor, hydraulic system, electric control and new wear parts.