Electric lifting platform - pedestrian stacker, pallet truck for ergonomic handling of small loads,

EXPRESSO Lift & Drive 225P (lift2move)

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Model: C3 Working Area: 3048mm*1524mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW/2kW/1.5kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. Fgodpfog D Ntmox Akvef 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt, Spraying unit (Anti-sticking liquid) Automatic and accurate Panels in-feed system Mod. A1 / 15 In-feed fence, adjustable by N.C. Panels in-feed system Bar Code Reader Pre-milling Unit (vertical joint trimmers) by N.C. 08.379 (2 x Kw 4,0) Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) VTG + 283.203 Band Pressure zone. Height adjustment of the band by N.C. Edge coils supporting unit (reels N°) 12 Snipping (end-cutting) unit 08.42 / 30 / B (Kw 0,66 x 2) (PNEU 0°-25°) 30m / min Rough Trimming unit 08.0555 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (Kw 0,66 x 2) 4 PROFILES HSK 25 Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (Kw 0,5 x 1) 30m/min Profile edge scraping unit (Multi-profile, by N.C.) 08.516 (4 PROFILES) Glue scraping unit 08.521 Fsdpsltmnlofx Akvegf Spraying Unit (for polishing liquid) Buffing unit 08.617 (Kw 0,25 x 4). Free space Milling grooving unit 08.190 (Kw 4,5 x 1)

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Hydraulic cylinder: double-acting with valve block -Type: unfortunately no type designation -Stroke: 450 mm Fodsvumd Hepfx Akvjgf -Piston rod: Ø 50 mm -Hole diameter: 35 mm / Hole spacing: 620 mm -Dimensions: 690/245/H180 mm -Weight: 40 kg

Condition: new, Year of construction: 2026, Technical data Control system Multi-axis real-time interpolator, with active trajectory forecasting, LAN communication, EtherCat, 2ms sampling time, optional RTCP tool end tracking, correction map Working area X 600 – 2500mm Y 900 – 6100 mm Gate clearance and Z axis range 100 – 700 mm Drive system Omron servo drives with EtherCat protocol, X, Y helical slats hardened ground in accuracy class 6, Z axis ball screw with accuracy class 5 Linear bearing Trapezoidal rails, Bosch Rexroth 25 Speed Up to 90 m/min Acceleration Up to 1G Program resolution Up to 0,0001mm Positioning accuracy 0,01 mm Gate drive double-sided master / slave with gate angle correction Fsdpfxon Nwifs Akvogf Electrospindles 2 kW to 18 kW powered by an inverter Tool taper ISO30 or HSK63 ER32 Maximum speed of the electro-spindle 24000 rpm (option 6 000, 40 000, 50 000) Construction Steel welded, ribbed, stress relieved, precision machined Equipment options positioning and correction of the material by means of a camera, laser, measuring probe linear, revolver tool magazine cooling the tool with mist, chilled air 3D laser or touch scanner positioning databases additional angular / rotary axes drilling units, angular active oscillating knife, roller knife, drag knife, creaser, marker pen pneumatic clamping clamps chip extraction installation Table type T-slot: aluminum profiles, solid aluminum, solid steel; vacuum; hybrid, pneumatic clamping clamps

Year of construction: 2011, condition: excellent (used), Lift&Drive 225P, electric, lifting manipulation trolley. Powder-coated steel and aluminum construction. Table dimensions: 100 cm x 40 cm. Minimum table height from the base: 67 cm. Maximum table height from the base: 193 cm. Fjdpfjf T R Nxjx Akvsgf Nominal lifting capacity: 225 kg. Brake on the rear wheels. In addition to the central brake, the trolley also features a directional lock for the rear wheels, making it easier for the operator to steer the trolley in a straight line. Manipulation trolleys designated with the letter P (Professional) are the largest, most stable, robust, and versatile devices.

Condition: used, Year of construction: 1984, radial piston motors oil motor Fgsdpfxjhpiiqo Akvef RADIAL-PISTON-MOTOR for dimter DKV 5

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Fgjdpfx Akepcqdwjvjf Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: excellent (used), CNC FULL Flexible LINE for Drilling and Dowels Inserting (Fitting insertion). With BECKHOFF Numerical Control Composed by the following machines: A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system E) 4th FLEXIBLE CNC Mod. BMA-DLS for drilling, montage, glue application and insertion F) Connection TRANSFER G) In-feed and rotating system RWA/RWZ- CNC H) In-feed and rotating system ZWA-1- CNC Fjdem Uyngepfx Akvegf I) CARCASE CLAMP PRESS Mod. KP-3- CNC, through-feed system L) Out-feed transfer

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Fjdpoflt Egjfx Akvjgf Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: used, Year of construction: 2010, overall grade 1-5 (1 bad, 5 like new): 5/5 certificates: CE, TÜV third valve Heating Neat linden h80d Year 2010 Hours 15000 Can be used immediately The number of wheels: 4 Maximum lifting capacity: 8.000 kg Fjdpfsxcaw Esx Akvjgf Maximum lifting height: 3.000 mm Lift mast: Dual Cabin: Closed Transmission: Automatic Production country: Germany Number of wheels: 4 General grade (1 min - 5 max): 5/5 Maximum lift capacity: 8.000 kg Maximum lift height: 3.000 mm