Glass racking system NEW

EXPOGLASS ® D220 - 12 S

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Rodpfx Aerzazyjpdsch Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Available immediately

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Rcedpfx Apsx A Tgysdjh Gluing System: PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: as good as new (ex-display), Year of construction: 2025, CMS Taktika Vertical cnc working center for Glas Bearbeitungsmaße: Max. Glas-Length: 3.100 mm Max. Glas-height: 2.000 mm Min. Glas-length: 320 mm Min. Glas-height: 220 mm Thickness: 4-15 mm Options: Rcjdpfx Apjwd Ichodsh - 2x groups of suction cups which 2 suction cups on each group - 2x Elektrospindle 6 kW 0-12.000 U/Min - Tool Magazin with 12 slots - Additional drilling from the backside - CAD/CAM - central lubrification

Condition: excellent (used), functionality: fully functional, Glass transport rack A type Loading height: 1800 mm Loading width (glass thickness): 400 mm each side Total rack dimensions: 1150 x 1150 mm Approx. 65 pcs. available Rcedpfx Aoznufuepdeh Very good and clean condition As is Available immediately

Year of construction: 2008, condition: ready for operation (used), A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement. Rcsdsx Hff Sspfx Apdjh

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Rjdpjmhhypefx Apdoch - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), HSS saw grinder LOROCH model SW Rodpfx Apei El Hcsdjch

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Rcsdpfobrantjx Apdjh Manufacturer: Busch Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Redpfowh T Dlox Apdjch Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation • Edge angle 0 to 45 degrees Rcsdpfx Aperhilxedoh • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500