Swap body trailer

Ernst Nagel*Bürocontainer*Wohncontainer

Condition: as good as new (ex-display), Heating: steam Control panel: ADITEC Base width: 157 cm Base depth: 240 cm Corpus height: 264 cm Min. room height: 320 cm Prodpfx Adophnz Nsnod Recommended room height: 330 cm Smoke-trolley dimensions (HxWxD), cm: 200x100x100 Connected load for HP heating: 60,5 kW Smoke generator width: 50,0 cm

Condition: new, Year of construction: 2025, You can smoke pices of meat, meat products(sausages, salami), fish, poultry pieces, cheese etc. Capacity: max 200kg Option of hanging with rods or trolley Easy to clean and operate It has three operating modes: dehydrating, cold smaking and thermal treatment Option of setting processing time and temperature Option od adjusting and saving programs. Predpfxepuhtzs Adnod Dimensions: 1630x1220x2450 mm, Weight420kg, 400V, 9kW Material: Stainless steel 304 2 Jears warranty

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Pedpfequ Uykjx Adnjrd Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep

Year of construction: 2022, condition: new, Niro-tech RX-150 single shaft paddle mixer This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity. The dimensions of the machine: 1300 x 700 x 1600 (all in mm) Podpjhqnppefx Adnord

Condition: excellent (used), functionality: fully functional, Automatic Slicer BIZERBA A500 Brand: BIZERBA Model: A500 Dimensions: 2400 × 850 × 1500 mm Prsdew Iv Rtspfx Adnsd Industrial automatic slicer for precise cutting of cold cuts, cheeses, and other food products. The BIZERBA A500 model features high throughput, consistent cutting accuracy, and a robust stainless steel construction designed for intensive use in production facilities.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Frozen Meat Grinder LASKA WWB 200 with LASKA BA 24 Column Loader Frozen Meat Grinder LASKA WWB 200 Manufacturer: Maschinenfabrik LASKA GmbH Model: WWB 200 Year of manufacture: 2009 Serial number: 13129 Power supply: 3 × 400 V / 50 Hz Rated power: 68 kW Current consumption: 130 A Dimensions: 2500x1700x2000mm The LASKA WWB 200 is a high-performance industrial frozen meat grinder designed for processing whole blocks of frozen meat (often without prior thawing). It allows high-throughput processing of large quantities of raw material in a short time, making it ideal for use in large-scale meat processing plants and industrial food production facilities. LASKA BA 24 Column Loader Manufacturer: Maschinenfabrik LASKA GmbH Psdpsxbt Nlsfx Adnerd Model: BA 24 Year of manufacture: 2007 Serial number: 12432 Power supply: 3 × 400 V / 50 Hz Rated power: 1.5 kW Current consumption: 3.5 A Height: 2850 mm The BA 24 column loader is used for the automatic loading of standard Euro bins or cutter trolleys directly into the feed hopper of the main machine (e.g. the WWB 200 grinder). It ensures ergonomic and safe operation for operators.

Year of construction: 2002, condition: excellent (used), machine/vehicle number: Reg Nr. 976, Machine Name: Paddle dryer Used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 U/min Prodpfx Aeitcvusdnjd Material: Stainless steel Driving force: 5,5 KW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: Stainless steel 1.4571 Gear box: Stirnradgetriebemotor Equipment: Double jacket, mechanical seal, shaft heater Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used very good Price: on request

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Prodpfxeq Nfuzs Adnjd Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: good (used), Manufacturer: Främbs & Freudenberg Type: 2000-6000-2 Prsdog Snvbopfx Adned Deck size 2.000 x 6.000 mm Number of decks: 2 Included: – Electrical Motor – Cardan Shaft – Springs Vibrating screen can be overhauled, sandblasted and painted.

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Prodpfx Asitcu Ejdned Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used