Electric motor 5 kW 1450 rpm

Elektrim eRFY55/4-5

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Itodpfsiyyf Iex Ah Nob Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Iodpfx Ahshp Rcrs Njtb Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: used, machine/vehicle number: 9993, 9-blade rotor 3 rows of stator blades Rotor diameter 400 mm Working width 500 mm Inlet cross-section for window profile bars approx. 200 x 460 mm Itjdpfjghgniex Ah Njb Drive motor 30.0 kW

Condition: new, Main features of the machine: Thicknesser TH 530 is a simple, solid construction intended for everyday work in the workshop, with a planer shaft width of 530 mm. It is characterized by a large massive ribbed cast iron table, which eliminates any vibrations during operation. The machine has an extremely powerful motor that drives the cutter heads (notched knives), which make the process of planing the most difficult wooden elements an easy task. Each knife is easy to replace if worn or damaged. Moving the table up and down is automatic after entering the appropriate dimensions. The sum of these many advantages gives the possibility of very precise machining settings. Advantages: Worktable mounted on 4 bolts Controller for automatic table height adjustment Planer shaft o120, 4 knives The possibility of cutting large dimensions Max planing width: 530 mm Isdpfehhnfwsx Ah Notb Max planing height: 300 mm Min length of the planed element: 400 mm Knife shaft diameter: 120 mm 2 rolls in the table top Number of knives: 4 The dimensions of the knives: 530x30x3 mm Knife shaft speed: 5000 rpm Power supply: 400V Total power: 5.8 kW 2 feed speed Electric Lifting Extraction port: 150 mm The machine is available immediately! Machine dimensions Length: 1000 mm Width: 1000 mm Height: 1160 mm

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) 2 rows of stator blades Rotor diameter 300 mm Itedpfx Ahoghgg Rj Neb Working width 600 mm Inlet cross-section approx. 440 x 600 mm

Condition: ready for operation (used), HEW R 160M/6-4 L engine , serial no. according to photo , hole spacing of mounting holes: 255 x 210 mm, Ø drive shaft: 42 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itedei D Ictjpfx Ah Nob

Condition: used, Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm Ijdpfx Ahjfitfie Netb -Construction: B3 -Protection class: IP55 -Dimensions: 600/315/H365 mm -Weight: 103 kg

Condition: good (used), Three-phase motor, electric motor -Power: 11 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 Iedpfx Ahscu Erxs Nstb -Dimensions: 600/360/H370 mm -Weight: 116 kg

Condition: good (used), Replacement motor for geared motor, electric motor, three-phase motor -Speed: 1400 rpm -Power: 2.8 kW Isdob A Hugspfx Ah Njtb -Design: B14 -Brake -Shaft diameter: 20 mm toothed -Protection class: IP 54 -Weight: 35 kg

Condition: good (used), Gear motor, electric motor -Speed: 2.5 rpm -Power: 0.25 kW -Design: B3/B5 -Shaft diameter: Ø 25 mm -Protection class: IP 54 -Quantity: 1x piece available -Dimensions: 630/260/H230 mm Ijdpockp S Djfx Ah Nstb -Weight: 27 kg