Tractor

Deutz-Fahr 6190 CSHIFT

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Bwjdpfxoyl S S Us Al Rsr

Condition: used, functionality: fully functional, power: 231 kW (314.07 HP), Year of construction: 2004, machine/vehicle number: KMTODO61E02076058, fully functional Bwsdpfeylyp Uex Al Rsr

Condition: used, Year of construction: 2006, First registration: 11.04.2006 Fendt 307 CI Year of manufacture: 2006 Operating hours: 3,445 Engine: Deutz 4-cylinder turbocharger Displacement: 4,038 cm³ Rated power: 80 HP Bsdpfxjyv S Ulj Al Rjwr Max. torque: 423 Nm at 1500 rpm Tank capacity: 108 l Transmission: 40 km/h, 21/21 overdrive, shuttle transmission PTO: Powershiftable 540 / 750 / 1000 Hydraulics: tandem pump 70 l/min at 200 bar Rear lift capacity: 48.9 kN 2 double-acting spool valves, cross control lever Brakes: hydraulic brakes Cabin: air-suspended driver's seat, roof hatch, height and tilt-adjustable steering column, heater (no air conditioning) Front loader with parallel guidance, without third control circuit Sale subject to margin taxation in accordance with § 25a UStG Location: not specified

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 4,400 h, power: 55.16 kW (75.00 HP), machine/vehicle number: A2204DAA2203584, Equipment: cabin, Hydraulic reverser, without air conditioning, FL80 loader Bsdpoy Eq Upofx Al Rjwr

Condition: used, Year of construction: 2018,

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Bsdpfx Alsrgzv Ne Rswr Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Year of construction: 2023, condition: new, Layout: Backhoe 20 years of experience, long boom-arm manufacturing suitable for all brands and models Bodpfx Ajn Tmy Rjl Rowr Please send a message or call for information and offers.

Condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Bwedjq A T Euspfx Al Ror Tank capacity: 51 liters Generator type: Protection class IP21, MeccALte Start type: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg Key start Sockets: 1 x 32 A 400 V 1 x 16 A - 400 V 1 x 230 V Schuko 2 x 16 A 230 V CEE

Condition: excellent (used), power: 264 kW (358.94 HP), operation weight: 23,600 kg, tire size: Bridgestone 30/65R25, tire condition: 70 %, Year of construction: 2023, operating hours: 1,710 h, Equipment: air conditioning, VOLVO A30G Bsdpfx Alsya U Unj Rswr Year: 2023 Operation hours: 1.710 hrs. ROPS Airco Back drive camera Radio Central lubrication body heating Tailgate Bridgestone tyres 30/65R25 approx 70% good VOLVO D11M Motor with 264kW CE Transport dimensions L/B/H - 10.5 x 3 x 3.4m Operation weight: 23,6 to.

Condition: used, Year of construction: 2015, operating hours: 6,850 h, power: 129 kW (175.39 HP), front tire size: 600/70R28, rear tire size: 710/70R42, Equipment: compressed air brake, OPERATING HOURS 6800 / AUTOPOWR / IVT - 50 KM / COMMAND CENTER DISPLAY AUTOTRAC PREPARED / JDLINK-CAPABLE / 4600 PROCESSOR / CAB PR.-CV CAB WITH COMMAND ARM STANDARD SEAT / MIRROR - MANUAL TELESCOPIC PANORAMA WS W/PD / STANDARD RADIO / HYD Bjdpsu Rvklefx Al Rewr