Crane system

DEMAG

Condition: good (used), Bridge crane, overhead crane, disc brake, crane brake, disc, drum and storm brakes, traveling crane brake, brake ring, conical brake disc -Manufacturer: Demag, Brake ring Conical brake disc Bsdpfxszix Rde Acnsdg -Type: 624 658 44 RIW -Dimensions: see photos -Dimensions: Ø 263 x 33 mm -Weight: 0.6 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. In very good working condition. Bdsdpfx Acev Eguyjnsg Available: March / April 2025.

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Bdsdsx Uqb Ijpfx Acneg Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Year of construction: 2004, condition: used, Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible. Bdsdpfxezybu He Acnsg

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Bdjdpfx Aey If Ayscneg Working Direction: Right to Left

Year of construction: 2001, condition: used, Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible. Bodozybu Topfx Acnjdg

Condition: excellent (used), The item for sale is a used Mannesmann Demag geared motor, consisting of a three-phase electric motor and an angular gearbox. Gearbox data: Manufacturer: Mannesmann Demag Type: S050 H-53-3 Number: 21300262 Gear ratio: i = 20.0 Oil capacity: 0.200 l Lubrication: oil Made in Germany Motor data: Bjdpfx Aozw Ew Tocnedg Manufacturer: Mannesmann Demag Motor number: 394356 Power: 0.37 kW Voltage: 220/380 V Current: 1.91/1.1 A Motor speed: 1370 rpm Frequency: 50 Hz Power factor: cos φ 0.78 Protection class: IP54 Insulation class: B Three-phase power supply With a gear ratio of i = 20, the approximate output speed of the gearbox is about 68.5 rpm.

Condition: good (used), • Facet grinding machine Bsdpfevxthtex Acnjdg • Year of manufacture 1990 • Comes from ongoing production • More information on request

Condition: reconditioned (used), functionality: fully functional, Demag wire rope hoist P632 H-8 2/1 6.3 Ton Includes trolley with RS125 wheel blocks, 30 mm spline shaft Main hoist 28/12K4P Fine hoist FG28 16/7P-4 Includes 2 trolley drives AFL04 / KBV71 A-8/2 Bdsdswv Rt Topfx Acnog Includes bottom block 2/1 6.3 Ton Includes remote control DST6/7 Condition: workshop refurbished

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Bdodozw D Hgjpfx Acnsg Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system for workpieces with dimensions: length 6500 mm, width 1500 mm, height 2200 mm. Bdedpfx Acevdlfzensg

Condition: good (used), Year of construction: 2006, Controll : NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Bedpfxozw D E Aj Acnjdg Dylight max: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Condition: used, Year of construction: 1990, total height: 1,000 mm, total length: 16,400 mm, total width: 3,000 mm, Colour: Yellow Empty weight: 3.500 kg - Year: 1990 - Documentation available: No - CE certificate present: No - Lifting capacity [kg]: 6000 - Span [mm]: 16000 - Girder: Single - Crane control: Radio-controlled - Dismantled: Yes Bdedpozwxd Hefx Acnjg - Transport dimensions: 16400mm x 3000mm x 1000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading Bedpfx Asy S E E Nocnodg

Condition: used, Year of construction: 2019, Injection molding machine Demag EL Exis SP 1000/1195-6300, year of manufacture 2019. Bodpezxxhujfx Acnsdg