Used Claas Disco 300 for sale (52)

Condition: used, Year of construction: 2025, working width: 9,100 mm, Mower Bar: Disc | Claas Disco 9300 Direct Swather Demo unit in use Year of manufacture: 2025 Large-area mower for rear tractor mounting, Cat. III - Working width: 9.10 m (8.90 m) - Main frame with optimized center of gravity due to rearward-angled outriggers - Low-speed concept with reduced speed to 850 rpm DIRECT SWATHER: - Central or unilateral swath merging via augers - Conical auger design for consistent crop flow - Swiveling augers for wide crop distribution - Auger discharge chute equipped with knife and counterknife Features: Wear skids Three-point hitch Drive shaft 1 3/8", 6-spline ISOBUS cable Outer protective curtains, hydraulically foldable Individual section lift (2-hose) Optionally available (not included in price): Ijdpfx Afowu Irkefotr CLAAS Disco 3200 F Profil Front-mounted disc mower without conditioner 3.00 m working width with wear skids incl. ACTIVE FLOAT hydro-pneumatic suspension incl. drive shaft | Internal no.: 11264119

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight Isdpsxf U N Uofx Affetr with MAX CUT cutter bar 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146

Condition: used, Year of construction: 2014, with front mower Disco 3200 FC / Iedpfx Aetlry Ssffetr

Condition: new, Year of construction: 2024, working width: 3,000 mm, Mower Bar: Disc | Claas Disco 3200 C Contour New machine Year of manufacture: 2024 - Disc mower for 3-point linkage, Category III - Central suspension - Working width: 3.00 m - Main frame with optimized center of gravity due to rearward-angled boom - Folding angle in transport position: 120° - Low-speed concept with reduced PTO speed to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines MAX CUT Cutter Bar: - 7 mowing discs with integrated SAFETY LINK safety module - Portal-style cutter bar with dual-sided suspension - Permanently lubricated cutter bar with precision-ground gears (20 mm) - Bolted and torsion-resistant cutter bar construction Itsdpfx Ajw Ul Uzoffor - One-piece, wave-shaped tray for tunnel effect - Forward-mounted mowing discs with HD wear protection - MAX CUT components made of hardened forged steel - Knife holders with tungsten carbide coating - Quick-change blades Cutter bar suspension: - ACTIVE FLOAT system, hydropneumatic suspension | Internal no.: 11180933

Condition: used, Year of construction: 2018, operating hours: 1 h, working width: 10,700 mm, Mower Bar: Disc | Claas Disco 1100 C Business Year of manufacture: 2018 Category III mounting Itedpfx Afew Hh Snefer Working width: 9.40 m to 10.70 m Transport width: 2.95 m Weight: 3,520 kg Load-sensing couplings ISOBUS control (Communicator II also included) Steel tine conditioner 9 discs per mower bar PTO shaft Wear skids Hydropneumatic suspension Internal ref. no.: 10844757

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Itodpswbaytofx Affor Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889

Condition: new, Year of construction: 2025, working width: 3,000 mm, Mower Bar: Disc | CLAAS Disco 3150 F Exhibition machine, unused Year of manufacture: 2025 Technical data and equipment: 3.0 m working width Itsdpfx Afowuhicjfjr Low-speed concept – speed reduction to 850 rpm MAX CUT cutter bar Quick-change blades Two-dimensional ground adaptation Weight: approx. 685 kg | Internal no.: 11258080

Condition: used, Year of construction: 2023, working width: 13,000 mm, Number of rotors: 10 | used Claas Volto 1300 T Year of manufacture 2023 Itjdjv Aqqgepfx Affor Used in 2024 Guarantee valid until June 28, 2025 Technical data and equipment: Working width 13.00 m 10 rotors with a diameter of 1.70 m Double feeler wheel Lower link attachment Cat. II Hydraulic headland lift Hydraulic swivel edge spreading cloth | Internal number: 11181001

Condition: used, Year of construction: 2015, Empty weight: 1.800 kg Attachment suited for: Agricultural machines Ijdpox I Nqzsfx Affstr Auction item. Rake in working condition. Rake through the center. Sold as seen in the photos. Working width from 6.2 meters to 6.8 meters.

Condition: used, Year of construction: 2012, operating hours: 8,600 h, power: 121 kW (164.51 HP), next inspection (TÜV): 11/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, CLAAS 550 ARION C MATIC FRONT LOADER 100 CENTURY EDITION NEW TIRES ----VEHICLE HISTORY * FROM FIRST OWNER Itjdpex Iyu Rsfx Affor * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT * 4-CYLINDER WITH 121 KW * CENTURY EDITION * C MATIC transmission * AIR CONDITIONING * SUSPENDED CABIN * ON-BOARD COMPUTER * FRONT HYDRAULICS * SUSPENDED FRONT AXLE * FRONT AND REAR LINKAGE * FRONT LOADER QUICKE TYPE: Q66 * CONTROL VALVE: DW 4 * FRONT LOADER WITH 4 CIRCUITS AND TOGGLE SWITCH * AIR CONNECTIONS FOR TRAILER * HEIGHT-ADJUSTABLE TRAILER HITCH * ADDITIONAL CONTROL VALVE: DW ? * TIRE SIZE: FRONT: 540 / 65R28 * REAR: 650 / 65R28 * NEW TIRES, INVOICE FOR OVER €7,000 AVAILABLE * EXPORT SALES ONLY WITH DEPOSIT MINIMUM €500 – €2,000 * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 – €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) 5 DAY, 15 DAY, 30 DAY LICENSE PLATES AND 15 DAY AUSTRIAN LICENSE PLATE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and third countries, a deposit of at least €500 / €1,000 is required. Changes, errors, and prior sales reserved! You can find more vehicles on our website. Sales are made exclusively according to our terms and conditions – see homepage. Important note – Important information: Despite carefully checking all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of various platform providers. Therefore, we note that all information is provided without guarantee and does not constitute legal entitlement. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for contract initiation. The information provided here is not guaranteed and does not constitute warranted characteristics.

Condition: used, Year of construction: 2020, operating hours: 3,396 h, load capacity: 6,000 kg, lifting height: 9,000 mm, fuel type: diesel, construction height: 9,000 mm, gearing type: automatic, Equipment: cabin, head guard, According to our "General and Expressed Terms and Conditions" and without any guarantee or warranty, we are pleased to offer you the following vehicle on a non-binding basis until concluded, subject to error, typographical errors, and prior sale: Claas Telehandler 960 Scorpion Variopower (Chassis 960) First registration: 16.07.2020 Operating hours: 3,396 h Engine: 4,038 cc 115 kW / 160 HP 40 km/h transmission Variopower Plus, Stage V Technical permissible gross weight: 13,000 kg Technical permissible trailer load: 16,000 kg Axle load per axle: 9,000 kg Mirror for trailer coupling Additional rear control circuit, electric Scraper for loader arm front Pre-filter vacuum separator Reversible cooling fan Air conditioning Front and rear windscreen washer Driver's seat in fabric with seat heating Heated rear and right side window Radio with MP3 operation 2 x LED work lights on front of telescopic arm 3 x LED work lights on the side Profi CAM (rear camera) with monitor in cab Terminal mounting bracket 3 x LED work lights front and rear Central automatic lubrication system Creeper speed function and hand throttle with Dynamic Power Tilt cylinder lock Electronic immobilizer Foldable beacon Without bucket and forks Michelin tyres 460/70R24 IND approx. 90% tread 1 x DW + 1 x pressure-free return line at the rear Next inspection at 3,500 h Itjdpfsx Ian Rjx Affjr Price: € 87,500.00 (net), including all attachments All information is provided without any guarantee or warranty. Our "General and Expressed Terms and Conditions" apply. Place of jurisdiction for both parties up to a disputed amount of € 50,000.00 is the District Court Ludwigslust; for higher disputed amounts, the Regional Court Schwerin. Subject to error, typographical errors, and prior sale.

Condition: used, mileage: 5,200 km, power: 90 kW (122.37 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5 kg, maximum load weight: 2,900 kg, lifting height: 6,150,000 mm, number of seats: 1, first registration: 01/2016, operating hours: 5,200 h, total height: 46,800 mm, driver cabin: other, wheelbase: 2,850 mm, Boom 6 m, tires new and as good as new, various hydraulic connections renewed, lifting capacity 3,500 kg, with pallet fork and shovel, engine power 90 KW, 3,621 m³, wheelbase 2,850 mm, lifting capacity with max. boom 1.35 to, fully functional, max. load . 8,500 kg Note Isdpsvikp Nsfx Affetr Despite careful checking of all our prices, it is not uncommon for errors to creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! - .

Condition: used, Year of construction: 2019, operating hours: 4,764 h, fuel type: diesel, Equipment: cabin, head guard, * Claas Scorpion 746 telehandler * Rearview camera * Air conditioning Itodpowta Dvsfx Affsr * Front wheel steering * All-wheel steering * Crab steering -----Internal vehicle number: 11072----Errors & prior sale reserved

Condition: used, Year of construction: 2023, operating hours: 1,300 h, power: 113 kW (153.64 HP), Equipment: air conditioning, all wheel drive, front linkage, Errors and prior sale excepted! Internal number: 1334. 7302669 ----EQUIPMENT 40 km/h * Air conditioning * Radio * Cooling compartment * Rotating beacon * Rear three-point hitch * Manual top link * Dual-line air brake system * Work lights * 5x double-acting spool valves at the rear * Piton fix and K80 trailer hitch * Front loader quick coupler * Front loader Claas FL 120C (year 2022 / lifting capacity 1,825 kg) ... and much more. ----The vehicle is in unrefurbished condition! Itsdpjwxrzksfx Affjr Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to take your vehicle in part-exchange. Financing / leasing possible with no down payment! Do you have any questions? We would be pleased to advise you!

Condition: used, operating hours: 1,061 h, power: 56 kW (76.14 HP), gearing type: mechanical, fuel type: diesel, first registration: 08/2013, color: green, overall weight: 7,500 kg, mileage: 1,061 km, suspension: other, number of seats: 2, Equipment: all wheel drive, cabin, 1st hand, radio, center armrest, HU/AU new, diesel all-wheel first registration 07.08.2013 56 kW 4,400 cm³ 2 seats 1,061 operating hours Cabin front hydraulics headlights front and rear radio 40 km/h reversing gear armrest rotating beacon front loader with parallel guidance, 3. Circuit 1st hand permissible total weight 7,500 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Itodpfjvic Epjx Affor

Condition: new, Year of construction: 2024, operating hours: 366 h, Claas Scorpion 756 Used demo machine Currently approx. 150 operating hours Equipment: CLAAS tool carrier, hydraulic, incl. lifting bolts Swivel angle 150° / 152° Emergency lowering for telescopic arm Front socket, 4-pin Rear socket, 7-pin Automatic height-adjustable towing hitch 3rd & 4th auxiliary hydraulic circuit front (double acting) incl. continuous flow function Pressure relief front, from cab and externally at telescopic arm 3rd auxiliary hydraulic circuit front (double acting) incl. continuous flow function Top frame cover Boom wiper, front 40 km/h VARIPOWER PLUS 500/70 R24 Michelin Bibload tyres Deutz engine, 4.1 litres, 115 kW, Stage V Pre-separator for vacuum Reversible cooling fan with automatic function Diesel particulate filter Combination display instrument, multicolour display 3.5" Interior rear view mirror Air conditioning Windscreen and roof window wipers Steering column, tilt and height adjustable in two stages Driver's seat, fabric cover, low frequency, with seat heating Radio with Bluetooth, hands-free system with external microphone LED work lights on telescopic arm, front, 2 units Sunblinds for roof and windscreen LED work lights, 3 front & 3 rear Vibration damping Itjdpfx Aowfivxjffjr Automatic bucket return Central lubrication points, 3 locations (front, rear, telescopic arm) Central lubrication system, prepared Creeper speed drive and hand throttle with DYNAMIC POWER Bucket cylinder shaking function EC certificate of conformity Overload warning system | Internal no.: 11180852

Condition: used, operating hours: 1,061 h, power: 56 kW (76.14 HP), gearing type: mechanical, fuel type: diesel, first registration: 08/2013, color: green, overall weight: 7,500 kg, mileage: 1,061 km, suspension: other, number of seats: 2, Equipment: all wheel drive, cabin, 1st hand, radio, center armrest, HU/AU new, diesel all-wheel first registration 07.08.2013 56 kW 4,400 cm³ 2 seats 1,061 operating hours Cabin front hydraulics headlights front and rear radio 40 km/h reversing gear armrest rotating beacon front loader with parallel guidance, 3. Circuit 1st hand permissible total weight 7,500 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Itjdpfx Ajvic Eisffsr

Condition: used, Year of construction: 2025, operating hours: 86 h, Compressed air | Knives: 25 | Pickup-hydraulic | Pickup support wheel | Roller hold-down | Claas Rollant 630 Uniwrap Year of manufacture: 2025, currently 422 bales pressed (as of 26.06.2025) Technical specifications: - Baler-wrapper combination with 1.25 m chamber diameter - Chamber width 1.20 m MULTIFLOW pickup: - Pickup width 2.10 m - Gauge wheels, pendulum mounted, with 16x6.5-8 tyres - Dual feed augers PRO cutting floor: - Hydraulic suspension and lowering cutting floor to prevent blockages - Operation via terminal including optical and acoustic signals Ijdowvwtaopfx Affstr ROTO CUT cutting rotor: - Cutting rotor with four spirally arranged tine rows - Individually protected knives against foreign objects - Hydraulic knife group selection Chamber: - 16 profiled steel rollers - Rear door with hydraulic locking - Greasable baler roller bearings Wrapping unit: - Fully automatic control - Twin wrapping arms with 750 mm film pre-stretchers - Wrapping speed max. 36 rpm for 6 layers of film in 23 seconds - Terminal for direct access at the wrapping table - Hydraulically lowerable film magazines for 12 spare rolls - PROFI CAM camera and work light for wrapper illumination - Continuous chain lubrication - Hand wash tank incl. soap dispenser - Hydraulic requirements: load-sensing and 1 x single-acting Equipment: MULTIFLOW Pickup HD with twin roller hold-down Dummy knives, set of 25 ROTO CUT cutting rotor with hydraulic swinging PRO cutting floor, 25 knives PREMIUM LINE knife set, 25 pieces Film pre-stretch 82% Bale transfer guide ROLLATEX net tying Single wide-angle PTO shaft with cam-type clutch, 6-piece Tractor hydraulic connection, comfort Adjustable support stand Hydraulic/electronic ROTO CUT swinging floor K80 ball head hitch, MR Tyres: 600/55 R26.5 Dual-line compressed-air brake system, up to 40/50 km/h LED high-end work lights including service lighting Screen for PROFI CAM CEMIS 700 Automatic central lubrication system, electrically actuated Extended tool set | Internal no.: 11264178

Condition: new, Year of construction: 2023, operating hours: 900 h, Equipment: all wheel drive, Claas Axion 870 Cmatic Cebis Demo unit, currently approx. 900 operating hours Equipment: - CLAAS front linkage 5.8 t - External control for front linkage and front spool valve Iedpfx Aewmxqneffstr - CEBIS operator terminal with touch function - CMATIC including 2 engine speed memories + CSM, CEBIS - Generator 250 Amp/hour - ISOBUS pre-installation incl. ISO socket at rear - Task Control Basic license activated, tractor side - AUTO PILOT / GPS PILOT ready - CLAAS communication module (LTE) - CLAAS Remote Service incl. five-year license - ISOBUS activation for CEBIS - CLAAS connect & 365FarmNet - XXL - ELECTROPILOT with shuttle function - Video function activation for CEBIS + CPC in-cab connection for 2 cameras - Steering interface pre-installed - Steering interface activation - Electronic hitch control (EHR) with radar sensor & slip control - Rear lower links, hook ends Cat. 3 - Automatic lower link stabilizers - Long hydraulic top link, hook end Cat. 3 - Towing frame with insert for swinging drawbar - Automatic hitch with 38 mm pin diameter - Compressed air braking system (dual circuit) incl. air dryer - Hydraulic system: load-sensing, variable displacement pump 205 l/min, 200 bar - 5 + 2 electro-hydraulic, proportional spool valves - Center axle spool valves configured for front linkage and 1x double-acting front + 1x double-acting front - Power Beyond load-sensing couplings without flat-face couplers - CMATIC stepless transmission - Transmission ratio 50 km/h - PROACTIV suspended and braked front axle - PTO 540/540 ECO + 1000 rpm - PTO shaft 1 3/8" 6-spline and 1 3/4" 6-spline - Parking brake on REVERSHIFT lever - Front fenders, pivoting, 620 mm - 295 HP maximum output, 284 HP rated output, ECE R 120 - Main battery switch, electronic - Cab with 4-point suspension - Rear window for 4-post cab, tinted - Rear window wiper incl. right side wiper - Electric mirrors incl. wide-angle mirror - Rear fender extensions, overall width 2.75 m - Additional socket interfaces - 2 LED driving lights, A-pillar - Oversized rear lights, LED with warning panels - 4x LED driving lights, 2x LED work lights on bonnet - LED work lights – Premium - LED work light package – Premium - Comfort seat, fabric, semi-active longitudinal/horizontal suspension - Passenger seat with seat belt - Automatic climate control, Categrory 3 pre-installation - MP3 radio with Bluetooth, USB, SD, external microphone and hands-free kit Including NOKIAN Soil King VF tires: Front: 600/70R30 Rear: 710/70R42 Including CEMIS 1200 steering system + SAT 900 receiver | Internal No.: 11113406

Condition: new, Year of construction: 2025, working width: 13,600 mm, Claas Liner 4800 Business PRO used machine year of manufacture: 2025 approx. 1,300 hectares Equipment: Iedpoxulp Rjfx Affetr Tyres 600/50 R22.5, 8-hole Pneumatic braking system Automatic brake force regulator Rotor wheels 16x6.5-8 Upgrade to 6-wheel rotor chassis (tyres 16x6.5-8) ISOBUS cable, without terminal Section Control Ready Hydraulic rotor height adjustment Windrow cloth | Internal no.: 11264561

Condition: used, Year of construction: 2022, operating hours: 919 h, Claas Lexion 6800 TT Year of manufacture: 2022 Engine hours: 918 Drum hours: 635 Hectares: 2,474 Current equipment: - LASER PILOT steering system, left - Header drive M, constant - Header feed roller with 2-way system, M - HP channel – AUTO CONTOUR, chain, open return pulley - Automatic hitch - Dust extraction for E/V/HP channel - Hydraulic top link for HP channel - Header brake - APS threshing system – grain/maize (10/18/18) - Threshing drum drive – 330-930 rpm - Threshing concave segment - Center guide for straw walkers, mounted - JET STREAM cleaning, incl. 3D and grass wind reduction - Returns volume measurement with CEBIS display - Upper and lower sieves, TM6 - Grain tank 12,500 liters - Grain tank preparation with unloading aid for grass - Grain tank discharge auger L, Ø 330 mm - Grain tank unloading rate 110 l/s - Grain tank unloading drive 80 l/s – 130 l/s - Fixed spout – grain tank discharge auger L, Ø 330 mm - Radial spreader – SPECIAL CUT - Swath former – radial spreader - Straw chopper drive for radial spreader – premium - Drive axle XL – TERRA TRAC Itsdpfx Ajxq Sfksffsr - Support wheels for track system - Recovery lugs for TERRA TRAC front axle - TERRA TRAC track width 635 mm - Access ladder with anti-collision protection – TERRA TRAC - Steering axle M, adjustable - Steering axle tires 500/85 R24 x 275 IMP, 8-hole - Travel speed 30 km/h - Without railings - Mercedes-Benz OM470 LA – 340 kW/462 HP (Stage V), air-cooling - Fuel tank 950 liters - Engine PTO pump - A/C-MATIC – automatic climate control with heater - Radio with MP3 function - Roller blinds for side windows - CEBIS terminal with armrest, standard - Camera system, pre-installed - Camera – rear, display in terminal - Camera – hitch, display in terminal - LAAS Remote Service incl. five-year license - TELEMATICS advanced license – 1 year - Comfort seat, air-suspended - LED work lighting – Plus - Large toolbox incl. instructor’s seat - CEMOS AUTOMATIC – AUTO SLOPE - CMOTION multi-function lever - Automatic module - Add-on module 1 - Add-on module 2 - Slope sensor - Steering angle sensor - CLAAS communication module (LTE) - Central locking system, standard - LED tail lights, extendable - CAN Ethernet Gateway (CEG) - FIELD SCANNER/LASER PILOT/AUTO PILOT ready - Automatic discharge direction adjustment - Straw chopper – counterblade/grate adjustment, hydraulic - Rear-view mirrors, electrically adjustable - Automatic chain lubrication for grain tank unloading Incl. Vario 930 header Incl. transport trailer | Internal no.: 11064749

Condition: new, Year of construction: 2024, operating hours: 301 h, Claas Trion 750 Montana Year of manufacture: 2024 Engine hours: approx. 300 Hectares: approx. 800 Current Equipment: - LASER PILOT steering system, left - Header drive M, constant - Cutterbar cylinder with 2-way system, MONTANA - MONTANA feederhouse – MULTI CONTOUR, chain, open, hydraulic - Automatic trailer hitch - Dust extraction for E-/V-/HP-feederhouse - Header brake - APS threshing system – Grain/Corn (10/7/18), DS - Knife set for feed drum, segmented - Adjustment tool for threshing system - Threshing drum drive – 400-1,050 rpm - Feed drum APS threshing system – Segmented, PREMIUM LI - ROTO PLUS variator drive - ROTO PLUS Standard 4/5 - JET STREAM cleaning, incl. 3D - Return grain volume measurement with CEBIS display - Upper and lower sieve, standard Isdpfxsxq Sfde Affotr - Grain tank 11,000 liters - Grain tank offloading pipe L, Ø 330 mm - Grain tank unloading 110 l/s - Swiveling discharge spout - Radial chaff spreader – SPECIAL CUT - Straw chopper drive for radial spreader – Premium - Drive axle L1 MONTANA – electrohydraulic shifting - Drive axle tires 800/70 R32 181 A8, 10-hole, Michelin - Access ladder with collision protection – MONTANA - Steering axle tires VF 620/70 R26 x 275, 8-hole, Michelin - Travel speed 30 km/h - Platform MONTANA L3 - Cummins L9 – 320 kW/435 HP (Stage V), air compressor - Fuel tank 800 liters - Engine PTO pump - Automatic climate control with heating - Radio sound system, digital (DAB+) - Storage compartments with USB-C port in B-pillar - Sunblinds for side windows - Footrests on steering column, right/left - Smartphone holder with wireless charging function - Leather armrest and leather steering wheel - Prepared camera system - Rear camera, display on terminal - Connection cable A-pillar for CEMIS/PROFI CAM - QUANTIMETER yield measurement - Printer - CLAAS Remote Service incl. five-year license - Comfort seat – fabric, air-suspended - LED work lights – Plus - Cool box incl. instructor seat - CEMOS AUTOMATIC – AUTO CROP FLOW - CEMOS AUTOMATIC – AUTO SLOPE - CMOTION multifunction lever - Auto module - Additional module 2 - Steering angle sensor - CLAAS communication module (LTE) - Standard locking system - LED rear lights, extendable - Windscreen wiper system for front window - CAN Ethernet Gateway (CEG) - Chaff spreader adjustment module – Radial spreader - Machine connect license – 5 years - Automatic chaff spread direction adjustment - Straw chopper – Counterknife/wear plate adjustment, manual - Rearview mirrors, electrically adjustable and heated - Automatic chain lubrication for grain tank unloading Incl. Vario 770 header Incl. transport trolley | Internal no.: 11217790

Condition: used, Year of construction: 1996, Binding type: twine binding | used Rollant 46 Twine binding hydraulic pick-up ready-to-use condition Ijdexpk T Djpfx Affotr

Condition: used, Year of construction: 2025, operating hours: 158 h, Equipment: onboard computer, Claas Lexion 5400 Demo machine from 2025 Engine hours: 170 Drum hours: 96 Area: 279 hectares Equipment: Generation 1 Header drive XL, two-speed Cutterbar feed roller with 2-way system, M V-channel – AUTO CONTOUR, chain, open return roller Automatic drawbar coupling Dust extraction for E-/V-/HP-channel CRUISE PILOT, pre-equipped Header brake APS threshing system – Grain/Maize (10/18/18) Drum speed: 330–930 rpm Iedpfxexmluqe Affstr Concave bar Center ridge for straw walker, fitted JET STREAM cleaning system, incl. 3D and grass wind reduction GRAINMETER incl. returns volume measurement with CEBIS display Top and bottom sieve, standard Grain tank 10,000 liters Grain tank prepared for unloading auger with grass support XL grain tank unloading auger, Ø 330 mm Grain tank unloading capacity 110 l/s Drive for grain tank unloading 80 l/s – 130 l/s Swivelable spout – XL grain tank unloading auger, Ø 330 Standard distributor – SPECIAL CUT, PREMIUM LINE, with SV Straw chopper drive for standard distributor – Premium Driving axle M – 20-bolt, with differential lock Drive axle tires: 800/70 R38 CHO 181D, 20-bolt Access ladder with collision protection Steering axle M, adjustable Steering axle tires: 600/65 R28 x 275 IMP, 8-bolt Travel speed 40 km/h Mercedes-Benz OM936 LA – 260 kW/354 hp (Stage V), air-cooled Fuel tank 950 liters Engine PTO pump Automatic climate control with heating, incl. additional pre-filter Radio sound system, digital (DAB+) with subwoofer Storage compartments with USB-C port in B-pillar Sun blinds for side windows Footrests on steering column, right/left Smartphone holder with wireless charging function Leather armrest and leather steering wheel Camera system, pre-equipped Rear-view camera, display in terminal Camera – drawbar coupling, PROFI CAM display Camera cable – XL grain tank unloading auger Camera – grain tank unloading auger, PROFI CAM display Camera monitor – PROFI CAM Connection cable for A-pillar for CEMIS/PROFI CAM QUANTIMETER yield measurement Premium seat – leather, air-suspended LED work lights – Premium incl. work high-beam Steering interface prepared Steering system software for FIELD SCANNER Grain tank prepared for GPS PILOT Cool box, incl. instructor’s leather seat CEMOS DIALOG via CEBIS CEMOS AUTOMATIC – AUTO CROP FLOW CEMOS AUTOMATIC – AUTO SLOPE CEMOS AUTOMATIC – CRUISE PILOT Without GRAIN QUALITY CAMERA CMOTION multifunction lever Auto module Add-on module 1 Add-on module 2 Inclination sensor Steering angle sensor CLAAS communication module (LTE) FIELD SCANNER forefield sensor Locking system, standard LED rear lights, extendable Windscreen wiper system for front and side windows CAN Ethernet Gateway (CEG) GPS PILOT Ready Straw distribution plate adjustment module – standard distributor Machine connect license – 5 years Without centralized lubrication system Straw distribution plate adjustment, hydraulic – standard distributor Automatic direction adjustment for spreading Straw chopper – counter-blade/friction plate adjustment, hydraulic Dynamic steering Rear-view mirrors, electrically adjustable and heated Automatic chain lubrication for grain tank unloading Hose reel with air compressor hose and air gun Hand-wash tank including Claas Vario 770 and transport trolley Equipment: Rapeseed side knife, left Rapeseed side knife,

Condition: used, Year of construction: 2025, operating hours: 174 h, Equipment: onboard computer, Claas Lexion 8600 TT Demo Machine 2025 Engine hours: 174 Drum hours: 96 Hectares: 416 Equipment: Generation 1 Header drive XL, two-speed Cutterbar cylinder with 2-way system, XL HP channel - AUTO CONTOUR, track, open idler roller Automatic tow coupling Dust extraction for E-/V-/HP-channel Ijdpfxoxmb Nqe Affjtr CRUISE PILOT, prepared Without straw moisture sensor Cutterbar brake APS threshing system - Grain/Maize (10/18/18) Threshing drum drive - 330-930 rpm Concave grate ROTO PLUS MULTICROP 4/5 JET STREAM cleaning system incl. 3D GRAINMETER incl. returns volume measurement with CEBIS display Upper and lower sieve, standard Grain tank 13,500 liters Grain tank preparation for emptying aid grass Shut-off valve, grain tank unloading auger, 420 mm Grain tank unloading auger XXL, Ø 420 mm Grain tank emptying 180 l/s Grain tank emptying drive 150 l/s - 180 l/s Swivel outlet - grain tank unloading auger XXL, Ø 420 Radial distributor grain - SPECIAL CUT, PREMIUM LINE Auxiliary pump drive straw distributor with chaff blower Straw chopper drive for radial distributor - Premium Drive axle XL - TERRA TRAC Support wheels for crawler track Towing eyes for TERRA TRAC front axle TERRA TRAC track width 635 mm, Camso Access ladder with drive-off protection - TERRA TRAC Steering axle L, adjustable Steering axle tires 500/85 R30 x 335 IMP, 10-bolt, Mitas Travel speed 40 km/h MAN D2676 - 404 kW/549 HP (Stage V), air compressor Fuel tank 1,150 liters Engine PTO pump Automatic climate control with heating, incl. additional pre-filter Radio sound system, digital (DAB+) incl. subwoofer Storage compartments with USB-C socket in B-pillar Sun blinds for side windows Footrests at steering column, right/left Smartphone holder with wireless charging function Armrest leather and leather steering wheel Camera - rear, display in terminal Camera - tow coupling, PROFI CAM display Camera cable - grain tank unloading auger XXL Camera - grain tank unloading auger, PROFI CAM display Camera monitor - PROFI CAM Connection cable A-pillar for CEMIS/PROFI CAM CEMIS 1200 terminal QUANTIMETER yield measurement TC-GEO activation – CEMIS 1200 terminal Premium seat - leather, air-suspended LED work lighting - Premium incl. high-beam work lights Steering interface prepared Grain tank preparation GPS PILOT SAT 900 GNSS receiver - RTK NET activation Data volume for RTK NET use – 5 years GPS PILOT activation – SAT 900 GNSS receiver Cool box, incl. instructor's seat, leather CEMOS DIALOG via CEBIS CEMOS AUTOMATIC - AUTO CROP FLOW CEMOS AUTOMATIC - AUTO SLOPE CEMOS AUTOMATIC - CRUISE PILOT Without GRAIN QUALITY CAMERA CEMOS AUTOMATIC - 4D cleaning CMOTION multifunction joystick Interface module Auto module Add-on module 1 Add-on module 2 Inclination sensor Steering angle sensor CLAAS communication module (LTE) Locking system, standard LED rear lights, extendable Windscreen wiper system for front and side windows CAN Ethernet Gateway (CEG) GPS PILOT Ready Module for spreader plate adjustment - radial distributor CLAAS connect operating licenses (separate order) Machine connect license – 5 years Automatic adjustment of chaff spreading direction Straw chopper - counter knife/friction floor adjustment, hydraulic Dynamic steering