Commercial vehicle

DAF CF 85 - 460 GANCIO SCARRABILE 30 TON 8X2

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders Bsdpfx Aozi Dhbsmreln - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Bsdpouix Sgjfx Amroln Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: repair required (used), mileage: 269,806 km, fuel type: diesel, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, compressor, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, navigation system, parking heater, power assisted steering, power mirror, soot filter, tachograph, tire pressure monitoring, traction control, For sale: a special-purpose vehicle for waste collection, a Mercedes-Benz Econic 2633L with a Zoeller garbage truck body. Bedpfxszdq R Sj Amrsln Vehicle specifications: • Make: Mercedes-Benz • Model: Econic 2633L • Year of manufacture: 2013 • VIN: WDB9576611V234571 • Mileage: approx. 269,806 km • Body: Zoeller – garbage truck • Engine: Diesel • Axle configuration: 6x2 Technical condition: The vehicle starts without any problems. The engine runs, but there is a noticeable knocking sound coming from the engine during operation. A possible cause could be damage to the piston, piston pin, or connecting rod. The vehicle is sold as damaged and requires engine diagnostics and repair. The body is complete, and the visual condition matches the photos.

Condition: used, mileage: 127,000 km, power: 70 kW (95.17 HP), first registration: 03/2013, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €8,395 Mercedes Benz Sprinter MAXI – Box van (SAXAS) Registered: 03/2012 Mileage: 127,000 km ---- Please, no emails – due to time constraints, we can only process them sporadically! Thank you for your understanding! Opening hours and further information: Viewing/purchase possible without prior appointment: No appointment required! Mon – Thu: 9:00 a.m. to 4:00 p.m. Fri: 9:00 a.m. – 1:00 p.m. Sat: 9:00 a.m. – 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch or our friendly staff. If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. ---- MOT: Can be performed upon request before purchase - Full service history - 1st owner - LED interior lighting - Motion detector in the interior - Sliding door between the cab and the box van - Rear view camera (see photos) - Various ventilation openings - Foldable shelves - Electrically locked doors - Rear step Loading area length: 4.40 m Loading area height: 2.00 m Loading area width: 2.00 m Special equipment: - Hill start assist - Generator 220 A - Steering wheel (adjustable steering column) - Radio preparation - Front mud flaps - Rear stabilizer - Reinforced front stabilizer Bodpfx Amsvh S D Serjln - Fleece battery 95 Ah Additional equipment: - Adaptive brake light - Airbag for driver - Washer fluid level indicator - Exterior mirrors, electrically adjustable and heated on both sides - Exterior mirrors with integrated turn signal - Battery 74 Ah - Brake assist - Braking system with ABS+ASR - Roof lining in the cab - Lockable glove compartment - Body/structure: Box van - Fuel tank: Main tank 75 liters - Headlight range adjustment - Truck registration - Engine 2.1 L - 70 kW CDI - Wheelbase 4325 mm - Smoker's package - Tire repair kit with compressor - Low emissions according to Euro 5 emission standard - Seat cover/upholstery: Fabric Lima - Service interval display Assyst - Heat-insulating glazing - Permissible total weight 3.50 t If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. If you have any questions, please contact Christian Hirsch or our friendly staff. If you have any questions: Christian Hirsch More offers at / More offers at / Equipment determined with the help of a VIN query; technical errors may occur. Information provided on the internet is a non-binding description. It does not constitute a guaranteed characteristic. The seller is not liable for typing and data transmission errors / changes / input errors. Errors and prior sale are subject to change.

Condition: used, Used biodiesel plant made by Biodiesel Fuels Equipment Ltd UK in 2012 and shut down in 2021. Plant capacity is 10,000 litres/8 hour day up to 25,000 litres/day if run for 24hours. Bsdpfoyhc Rgex Amrjln It has been used to process used sunflower and palm oil. Equipment includes: (3) separators, (2) reactors, (2) ionisers, (2) oil preparation vessels, (1) methanol preparation vessel, (1) tank for biodiesel.

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm Bjdpfx Amewbv Ersreln - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, functionality: fully functional, mileage: 132,900 km, color: red, gearing type: automatic, fuel: diesel, Year of construction: 2019, BMW 1 Series 116d for sale, in very good condition, with 132,900 km. Comfortable and reliable car. 🔹 Features: Bsdpfozimhdsx Amroln 132,900 km Fabric interior 4 doors Red color Very well maintained Smooth and comfortable driving Ideal for both city driving and long trips 🔹 Condition Interior and exterior in very good condition.

Condition: excellent (used), functionality: fully functional, Four-side planer / Four-sided moulder Compact 23 Max. working width 230 mm Max. working height 125 mm Max. diameter of profile tools 180 mm Surfacing spindle 4 kW Vertical spindle 5.5 kW Upper horizontal spindle 4 kW Blsdpfx Amst Dk Rxsron Lower horizontal spindle 4 kW Machine dimensions 3200 x 1400 x 1600 mm, Weight 1850 kg Transport available for an additional charge!

Condition: new, Year of construction: 2022, Working width: 410 mm Planing height: 230 mm Planer cutterhead: Tersa Number of knives: 3 Height adjustment: Handwheel Planed thickness display: Scale Feed rate: 7 m/min Infeed roller: Steel Pressure bar: - Outfeed roller: Steel Table rollers: No Motor power: 4.4 kW Dust extraction connection: 100 mm Bsdpfx Amei Ezr Esrsln Machine length: 800 mm Machine width: 700 mm Weight: 205 kg

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Bsdoi D Da Aopfx Amroln Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.