Side loading forklift

Combilift C5000SL // New Price

Condition: excellent (used), Year of construction: 2007, operating hours: 7,899 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,650 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Kubota, fork length: 1,200 mm, overall weight: 9,000 kg, empty load weight: 9,000 kg, total height: 2,850 mm, total length: 3,900 mm, total width: 2,200 mm, maximum load weight: 5,000 kg, fuel: diesel, Equipment: front guard, head guard, New price 21,900 EUR (previous price 25,900 EUR) Mast with free lift Very good condition We sell forklifts after a full service. Prepared for the end user. Dcodpfx Ajyyz Agodaef Ready to use. We can arrange transport within Europe and worldwide.

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes Dodpfx Adsdlhdbsascf fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: excellent (used), Year of construction: 2007, operating hours: 7,899 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 1,650 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Kubota, fork length: 1,400 mm, empty load weight: 5,000 kg, total height: 2,850 mm, total length: 3,900 mm, total width: 2,200 mm, maximum load weight: 5,000 kg, fuel: diesel, Equipment: front guard, head guard, New price 21,900 EUR (previous price 25,900 EUR) Mast with free lift Very good condition We sell forklifts after a full service. Dcsdsyw Shbspfx Adasf Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Dcjdetuwz Iopfx Adaef Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal

Condition: new, lifting height: 15,800 mm, Year of construction: 2015, operating hours: 1,465 h, General information Field of application: Construction Drivetrain Make of engine: Yanmar Weights Empty weight: 2.800 kg Functional Lifting capacity: 3.150 kg Dedjxphkgspfx Adascf CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Delivery terms: EXW Transport dimensions (LxWxH): 3,15x0,75x2 Latest inspection: 2025-10-09 Production country: NL Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Hoeflon C6 * 2015 * 1465 working hours * Diesel and 230-volt drive * 15.8-meter working height * 13.7-meter horizontal reach * 75-cm clearance width * 3150 kg lifting capacity * Remote control * Equipped with new undercarriage! * 2800 kg net weight * Inspection valid until October 2026 * Includes all documents

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Dsdpfx Adoxx Hwweascf Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 6000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: good (used), Year of construction: 2022, Plastering machine concrete pump InoTec InoComb Maxi Power Set, year 2022, Ser.Nr.22612, 5,5kw drive motor 400V, delivery distance 50m, delivery height 30m, water pressure increase integrated, delivery 8-50l/min, compressor integrated, water hose, mortar hose ca.30m, fine plastering device short and long straight, good condition little used, many accessories Dcedpfokl Adyex Adasf

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA Dcodpfxjvuz N Ro Adasf High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: new, Year of construction: 2026, A700 Fully Automatic Mitre Solid Wood 9m Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. Dcedpfsmdq I Iox Adasf • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Mitre timber structures manufacture • Bulk timber cutting • Furniture manufacture • Planters and boxes manufacture Model: A700 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, functionality: not functional, Year of construction: 2008, operating hours: 10,625 h, load capacity: 4,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: simplex, drive type: Diesel, Sideloading forklift ISO class: ISO Class 3 = 2,500 - 4,999 kg Dcjdpjw Akn Rofx Adaof Mast type: Standard Condition: Not operational Technical condition: For spare parts Description: Damaged engine