4-way forklift

Combilift C3000CB GAS TRIPLEX 4900 FREE-LIFT

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Cjdsw S Tyaopfx Ailjrd

Condition: new, Year of construction: 2024, MOBIL 2500 The mobile edge banding press. Ideal for constructing furniture! Cjdsyuv Topfx Ailsrd Technical Description MOBIL Typ 2500 (Typ 3000): > rigid, welded steel frame with fixed fences and spacer for massive, veneer and plastic edges > integrated electro heating rod made of resistant AL-alloy, lateral cut: 64 x 46 mm, controllable form 50 - 248°C , power 1200 (1459) Watt > 4 (6) clamping and pressing aggregates, each aggregate mounted on 7 ball bearings; each aggregate has its own clamping and pressing cylinder; adjustable width of the work piece 12 - 105 mm. Width of massive surface to be glued on the work piece is about 50 mm > adjustable counter bearings for exact conformity of the edges > pressing cylinders and the counter bearings with vulcanised rubber plating's > fixed fences and spacer are covered by a special glue abrasive coating > the pneumatic pressing units are controllable separately, always pair wise; each pair: 1 shifter for: clamping of work pieces and 1 shifter for : pressing of work pieces > press is mobile on 4 guide rollers, 2 rollers with break > the press is equipped with a pneumatic maintenance unit, adapter 3/8 ´´, pressure controllable from 3-10 bar. Electric connection for the heating rods: 230 V, 50 Hz, 1200 (1450) Watt. working space w x h x d in mm: 2500 x 50 x 105 overall dimensions w x h x d in mm: 2700 x 1200 x 850 Additional options and accessories for MOBIL on request!!!

Condition: excellent (used), Year of construction: 2006, Thickness planer Codpfeyvq Htsx Ailjrd Manufacturer: Martin Model: T45 Year of manufacture: 2006 Operating hours: approx. 128 h Planing width: 630 mm Planing height: 2.8 - 300 mm Power: 5.5 kW Number of knives: 4 Knife type: Tersa 1 rubber feed roller 1 rubber outfeed roller Height adjustment: Electric Feed speed: 6/12 m/min Table length: 1,260 mm Speed: 5,000 rpm Weight: approx. 1,300 kg

Condition: excellent (used), 2 heaters 2x1400V Crjdotrf Tkepfx Ailjd In very good condition .

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,766 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: Toyota 4Y, fork length: 1,065 mm, tire condition: 100 %, overall weight: 6,500 kg, empty load weight: 3,000 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, Equipment: adjustable boom, front guard, head guard, pallet forks, sideshift, Very good condition Fork positioner + sideshift Toyota engine Crodozf Iwxopfx Ailed We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.