Shredders Comafer MAC 300 1997

Comafer MAC 300

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Ijdpfxewh Na Nj Ahvohw Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, functionality: fully functional, 1600 kVA Oil/Hermetic Transformer, Pauwels, year of manufacture 2001, 21kV/0.69, vector group Dyn5, HV plug-in bushings, LV porcelain bushings, Optional: pointer thermometer, full hermetic protection, rollers, connection flags. Ihjdpfx Ajxwa S Eshvew

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Iodpfxjua Tbwj Ahvohw Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, saw-blade dia. 500 mm Cutting height 120 mm Motor output 5,5/7,5 kW working length 4100 mm Ihodpfowhf Ipex Ahvow

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 600 mm, height adjustment type: pneumatic, overall weight: 2,300 kg, compressed air connection: 6 bar, extraction nozzle diameter: 120 mm, feed length X-axis: 6,200 mm, hole diameter of the disc: 80 mm, warranty duration: 12 months, working height: 900 mm, The KP 900 Automatic crosscut saw is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 27–30 m3 of pallet lumber or approximately 20,000 pieces of pallet blocks per shift (8 hours), depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the processed material, which is manually loaded into the machine. Ijdpoubbtkofx Ahvshw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 815x740x1140 mm Weight 232 kg Ihjdpfxjvz H Daj Ahvsw Total power requirement 4,5 kw

Year of construction: 2006, condition: used, beside the press granulator Hellweg MDS 120/150 1,5 KW Year: 2006 Ihodpfx Aheixt Hlsvjw Power: 1,5 kW Application: Feed opening: 150x150 mm No. rotor knives: 3 No. stator knives: 2 Rotor-Ø: 150 mm Rotor-width: 120 mm Price: € 2.750,00 contact: Mr. Rainer Eckerle