Used lowboy semi-trailers / low loaders for sale (211)

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Codpfxjx Dzn Us Ab Iora

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori Codpow Tpqwofx Ab Isra

Condition: new, maximum load weight: 40,790 kg, overall weight: 59,000 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Low bed: Csdpow Tprbofx Ab Isra - Low bed with external beams, extendable design, SUPER LOW version, approx. 7,550 mm long - Low bed with fixed hardwood flooring, approx. 40 mm thick, and mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current bed length - 7 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate floor and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 1 pair of flat lashing rings in the trough (approx. LC 10,000 daN) - 2 pairs of flat lashing rings in the trough (approx. LC 16,000 daN) - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and lock pins to secure in raised position - Final coating of axles with 2 coats of 2-component paint, single color in grey 34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) Braking system: - Braking system according to EU regulations with EBS-E (2S2M) without interconnected lines to the tractor unit Electrical system: - Electrical system according to EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15 pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with a wheel blasting machine after welding - Second abrasive blasting with corundum for optimal adhesion of the coating system - Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL - Rear section metallized and painted in RAL 9010 (pure white) - Rims in silver-grey - No metallic paintwork possible - Paint structure tested in salt spray test according to ISO 9227-NSS - Sealing of cavities with special wax Accessories included: - Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the outer beams - Without container locks - 3.5-inch king pin - One galvanized steel front wall, approx. 400 mm high - One spare wheel carrier in front of the front wall - At the galvanized front connection bar, yellow-red air couplings - Remote steering from front and rear via cable remote control with push buttons, with single-track monitoring of axles (without installation in the tractor unit) - Electro-hydraulic unit - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,000 x 400 mm (L x H)

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm Crsdpfx Aelthguob Ija * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: Credpfsxf Silex Ab Ija - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 26,827 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 16,240 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess Hardly Used Immediately Available Including Winch TECHNICAL SPECIFICATIONS: * Fifth wheel height (H5): approx. 950 mm * Rear swinging door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * King pin capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with extendable sides) * Sliding platform: Not included * Total weight (at 80 km/h): 39,000 kg * Total weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on the 1st axle * Lift axle control: Manual Crjdpfxexy Ddks Ab Isa * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel holder on front bulkhead * Air suspension, 1 x load gauge indicating pressure at the axle assembly * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners * 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only * Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm * Jost landing gear, 50 tons * Foldable rear supports, 45 tons * 2 pairs of wheel wells for transporting wheeled vehicles * Wheel well bridge for covering the wells RAMPS: * Ramp loading capacity: approx. 40 tons * Suitable for hydraulic folding and adjustment * Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons * Rear ramp safety: Ramp protection chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included * Stake pockets: 5 x 2 stake pockets (52 x 102 mm) * 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers * Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) * 1 x rotating beacon * 1 x work light on underrun guard * Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for oversize transport * Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Codpfxewh Uips Ab Isra

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork Csdpfx Aev Sw E Aeb Iera * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, empty load weight: 13,100 kg, maximum load weight: 22,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2013, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | VAN ECK UT3Z double-decker refrigerated box semi-trailer | Carrier Vector 1950 Diesel hours: 8791h | Total weight: 36,000kg, payload: 22900 kg | Loading area dimensions: 1st deck: Length: 13.20m Width: 2.48m Height: 1.82m 2nd deck: Length: 9.65m Width: 2.48m Height: 1.82m Deck: Length: 9.65m Width: 2.48m Height, 1.78m Clearance between axle unit 1.50m | Portal doors | BPW axles with Tridec independent suspension, | 2 zone refrigeration, 2x evaporator, | 385/55R22.5 tires | Wabco Smartboard, | Subject to errors, input and prior sale. Cjdpfx Ajmu Nznjb Iera

Condition: new, empty load weight: 7,583 kg, maximum load weight: 14,417 kg, overall weight: 22,000 kg, axle configuration: 1 axle, loading space length: 11,016 mm, total length: 2,490 mm, total width: 2,480 mm, suspension: air, rear tire size: 275/70 R22.5, Equipment: ABS, Krone SE refrigerated semi-trailer | Single-axle trailer with turntable steering | Tires 275/70 R22.5 | TK SLXi 300 | Electric and diesel deep-freeze unit | Dhollandia DHLM 2000kg tail lift | Twin tires | Internal dimensions: Height: 2.48m Width: 2.49m | Subject to errors, input mistakes, and prior sale Crjdpfxsxmiyde Ab Iea

Condition: used, empty load weight: 7,500 kg, maximum load weight: 25,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SKVT 24 Double-decker refrigerated trailer | SAF axles with disc brakes | Carrier 1200 | 385/65R22.5 | Toolbox | Cooling data recorder | Electric and diesel freezer unit | Double-decker in good condition | Subject to errors and advance sale Crsdpfx Abewcf Ifo Ija

Condition: used, empty load weight: 8,563 kg, maximum load weight: 30,437 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2016, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | KRONE SD Cool Liner | Carrier 1350 aggregate | Lift axle | Pallet box | Krone axles with disc brakes | Tool box | approx. 9,520 diesel hours | Tires 385/65R22.5 Errors, input and advance sales reserved. Cjdpfsv An A Tox Ab Iora

Condition: used, empty load weight: 8,681 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2014, suspension: air, tire size: 385/55 R22.5, Equipment: ABS, | Schmitz refrigerated trailer S3B | TK SLXe 400 refrigeration unit | Double deck without beams - beams available on request | Pallet box | Internal width 2.49 m | Internal height 2.69 m | Schmitz axles with disc brakes | Spare wheel holder, toolbox | Diesel hours: 28,394 h | Subject to error, input mistake, and prior sale. Crsdoxdn Hqepfx Ab Iea

Condition: used, empty load weight: 8,550 kg, maximum load weight: 26,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SVKA 24 Refrigerated Double-deck Semi-trailer | SAF axles with disc brakes | Carrier Maxima 1300 | 385/65R22.5 | Toolbox | Temperature data recorder | Electric and diesel deep-freeze unit | Good condition, double-deck | Pallet box | Subject to error, input mistake, and prior sale Crjdjw Hbuiopfx Ab Ioa

Condition: used, empty load weight: 8,969 kg, maximum load weight: 27,031 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2013, suspension: air, tire size: 385/55R22.5, Equipment: ABS, truck registration, KRONE SD refrigerated semi-trailer double deck | Carrier 1550 with electrical connection | Pallet box | Lift axle | BPW axles with disc brakes | Toolbox | Lashing rails | Temperature recorder | Spare wheel holder | Diesel hours: 8,123 h | Internal width 2.46m | Internal height 2.64m | Subject to error, input mistake and prior sale Codpfxsw Uighj Ab Isra

Condition: used, empty load weight: 8,563 kg, axle configuration: 3 axles, first registration: 07/2016, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, | Krone Cool Liner TKS | Carrier Vector 1350 refrigeration unit | Pallet box | Krone axles with disc brakes | Spare wheel holder x2 | Cooling recorder | 66,695 diesel hours | Good condition | Subject to errors, typos, and pre-sales. Crodpfx Abjwbupve Ija

Condition: used, empty load weight: 18,500 kg, maximum load weight: 59,200 kg, overall weight: 77,700 kg, axle configuration: > 3 axles, first registration: 10/1978, loading space length: 9,650 mm, loading space width: 3,150 mm, loading space height: 1,100 mm, total height: 142,000 mm, suspension: steel, tire size: 8,25 R 15 PR 18, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: in transit, 6 axles, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-part loading ramps, front support, twin tires Body: 600mm ramp width, 1950mm between ramps, 6 axles, 3rd, 4th, 5th, and 6th axles hydraulically forced steered, fifth wheel height 1,550mm loaded, kingpin 3 ½", 6 x 10.55t axles, total length 14,200mm. Credexwa Uyopfx Ab Isa All information provided without guarantee, as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors!

Condition: new, Year of construction: 2025, 5 Axle Lowbed Credpfxorlm Txj Ab Ija Please get contact with us for more informaiton;

Condition: new, Year of construction: 2025, GVN Trailer 3 Axle Standart Lowbed      Please get contact with us for more informaiton;   Csdpfx Asqxa Szeb Iora   

Condition: new, maximum load weight: 73,090 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list; the full specification is available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 Csdpfjxbv Ausx Ab Iora 2-Axle Compact Front Bogie: * Hook mounts front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-on/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm, ground clearance approx. 150 mm 4-Axle Rear Bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * Rear closing cross-member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres according to manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure is automatically blast-cleaned after welding using a turbine blasting system * Second round of blasting with corundum for optimal coating adhesion * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final coat with 2 layers of 2-component topcoat, single colour in RAL 3002 Carmine Red, corresponding to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls for the gooseneck, approx. 400 mm high * 3.5-inch king pin * Truck hydraulic connection with flow regulator (20 l/min), incl. gallows for supply line suspension * The tank of the tractor unit must have a minimum capacity of 80 l * With MAX Trailer couplings; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on the gooseneck * Front bogie with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle bogie with standard grease NLGI-2 * Prepared for receiving bolt-on container positioning for 1 x 20' or 1 x 30' containers on outer beams * Without container locks * Mounts on the outer beams of the loading area for installing folding marker extensions * BEKA-MAX central lubrication for a 4-axle bogie with standard grease NLGI-2 * Rear bogie equipped with a socket for remote cable steering * Rear bogie with trough * One LED beacon with mounts on the left and ri

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Crodpfxswlip Ee Ab Isa Available immediately. Subject to errors and prior sale.

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° Crodpfxergzv Ns Ab Iea * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: used, maximum load weight: 24,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/1995, Year of construction: 1995, Equipment: ABS, BABELSBERGER SSA 51 SAF AXLES BALLAST TRAILER 14 STANCHIONS 1ST OWNER ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT * TYPE: SSA 51 / 124/1 * BALLAST SEMI-TRAILER * 3 AXLES * DRUM BRAKES * AIR SUSPENSION * 14 STANCHIONS * LOAD SECURING EYELETS * TIRE SIZE: 445 / 65 R 22.5 * GROSS VEHICLE WEIGHT: 34,000 KG * UNLADEN WEIGHT: 9,500 KG * PAYLOAD: 24,500 KG * IMMEDIATELY READY FOR USE---- * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAY, 30 DAY LICENSE PLATES AND 17-21 DAY AUSTRIAN LICENSE PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU & third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Modifications, errors and prior sale excepted! You can find more vehicles on our homepage: Cedpfxetvt A Tj Ab Iora Sale is subject exclusively to our terms and conditions – see homepage Important notice – Important information: Despite thorough verification of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of different platform providers. Therefore, we would like to point out that all information provided is without guarantee and does not constitute a legal claim. Legal notice: This advertisement does not constitute an offer within the meaning of §145 BGB but is merely information to initiate a contract. All information is provided without guarantee and does not represent warranted characteristics.

Condition: new, machine/vehicle number: dc46d2e1cd272305b99fb3160, empty load weight: 9,800 kg, maximum load weight: 31,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Vehicle consisting of: Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2 kingpin and 2 kingpin positions 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit 1st pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, slanted towards the entrance. Length at bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in main beam area 260 mm higher than wheel recess. 2nd pair of wheel recesses between A and B axle. Bottom length approx. 350 mm, depth approx. 260 mm. Note! Frame in main carrier area 260 mm higher than wheel recess. If wheel loaders are to be driven and the overall height is to be checked, we request a technical data sheet for the wheel loader types with exact details (if overall height is exceeded -> customer risk, approval required), (depending on the ground clearance under the machines, inserts in the wheel recesses are required by the customer). Wheel recess cover can be pulled out from the main frame, with wooden inserts. Widenings extendable to 3,000 mm (not in the rear slope and not in the wheel recesses below) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 2 pairs of ring lashing eyes, 5 tons each at the front on the gooseneck 11 pairs of lashing rings at the top and sides, each 10 tons, embedded in the outer frame 2 x on gooseneck9 x in low loader bed distributed first lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not greater than 1100 mm 8 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, or instead of stake pockets 5 to. Ring lashing eyes embedded in the floor Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17,5 at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system Csdoi Ri Hcopfx Ab Iora Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1 x LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checker plate covering Storage box embedded in drive-over slope to gooseneck Then with 70 mm softwood floor, in the wheel recesses underneath and in the wheel

Condition: new, machine/vehicle number: 5c7120ea17bcf92d3b69899da, empty load weight: 14 kg, maximum load weight: 35 kg, overall weight: 50 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with exchangeable 2 king pins 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Folding rear support 2x wheel chocks with holder Aluminum side collision protection Quarter-shell mudguards in front of and behind axle unit with spray flaps behind each axle 1x storage box Box, w=2 350 mm x l=730 mm x h=640 mm, bolted transversely at the front to the floor of the gooseneck, with 2 storage trays Widenings extendable to 3,000 mm (not in rear slope) (track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3000 mm Excavator trough above the rear axles starting to the rear, approx. 500 mm wide and approx. 230 mm deep Low loader lashing eyes 3 pairs of lashing eyes per 10 tons at the front gooseneck, 8 pairs of lashing eyes per 10 tons in the low bed, 3 pairs of lashing strips in the tramline area of the low bed, 3 pairs of lashing eyes per 10 tons in the axle/rear area Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Hydraulic forced steering via saddle deflection wedge acting on all 3 axles, Post-steering with radio remote control + auto toe-in, (up to max. 20 km/h)Note! A 2-pin Nato socket with at least 2 x 35 mm² is required in the truck for the power supply to the steering system. Power is supplied to the pump unit via a Nato connection cable to the towing vehicle, without truck installation (re-steering must be used once a week). Air suspension Wheels and tires 235 / 75 R 17,5 at the choice of the manufacturer Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-applied parking brake EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, without connecting cable With lifting & lowering valve, hold function in lowering position + auto-reset function Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle driving stability system Trailer Infocenter, for displaying vehicle data such as axle loads (no calibrated scales), mileage and diagnostic/system messages. Electrics 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable 1x additional LED work light(s) at the rear, switched via reversing light 1x LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel / checker plate covering In the tramline area with 70 mm softwood floor, in the wheel housing area with steel / checker plate covering, low bed can be raised hydraulically on the left and right in the tramline area for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Drop deck length approx. 6,300 mm Drop sides Csdpfxsi Ri Hgs Ab Ijra 25 mm aluminum h