Refrigeration dryer

Buran DSM SP 0020 A/301

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Podsqt Dmyopfx Amyopw According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel Podelz Rvlepfx Amyspw 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N Podeht Hg Dopfx Amyjpw FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 Psdpfx Aoywd I Tjmyopw - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: Ppsdpfx Amjy A Ei Nsyew • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: good (used), Year of construction: 2003, Megamat Type: FSE 7.0 2448/816-4710 Equipment no.: 70.0096 Year of manufacture: 2003 Device height: approx. 4720 mm Device width: approx. 2850 mm Device depth: approx. 2760 mm Number of trays: 21 Tray width: approx. 2445 mm Ppedpfxoyh Ipfe Amyow Tray depth: approx. 815 mm Tray height: approx. 30 mm Maximum tray load: 540 kg Total load capacity: 70,000 kg Colour: Anthracite

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, filter area: 378 m², Equipment: documentation/manual, Venti Oelde Extraction System RK 126 ZS 3 – Industrial Quality, Airflow approx. 43,800 m³/h, 378 m² Filter Surface, Year 2003, incl. 3 Fans, incl. Pipework, incl. Air Recirculation, excl. Spark Extinguishing System For sale is a high-quality extraction and filtration system from Venti Oelde (Type RK 126 ZS 3) with an airflow of approx. 43,800 m³/h. This system is ideal for medium-sized manufacturing operations, offering an excellent combination of performance, size, and integration capability. 👉 Particularly interesting for companies seeking a powerful yet easily integrable central extraction solution. Technical Specifications - Airflow: approx. 43,800 m³/h - Filter surface: approx. 378 m² - Year of construction: 2003 - Main fan: approx. 45 kW - Auxiliary fan: approx. 22 kW - Total power: approx. 67 kW - Robust industrial-grade construction Scope of Delivery - Filtration system - Fans - Piping system - Incl. air recirculation - Rotary valve - Steel structure - Controls / switch cabinets (if available) Pedpfoywflmjx Amyopw Condition - System was in industrial use - Fully operational until dismantling (according to previous owner) - Well-maintained overall condition - Viewing expressly encouraged Special Features - Excellent ratio of performance to size - Much easier to integrate compared to large-scale systems - Powerful drive units (45 kW + 22 kW) - Immediately available – no lead times - Optional dismantling support can be organized at additional cost!!!! The machine offered is sold as a used system. Sale is made under exclusion of any liability for material defects. The machine is sold as inspected, with no warranty or guarantee of any kind. The seller provides no guarantee regarding functionality, performance or suitability for any specific purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages arising from injury to life, body or health, or in cases of intentional or grossly negligent conduct on the part of the seller. Dismantling and Transport Dismantling of the machine is the responsibility and at the expense of the buyer. The buyer bears all costs and risks for dismantling, loading, and transportation. Transfer of Risk Risk passes to the buyer at the latest when dismantling or loading begins. Other No liability is assumed for hidden defects. All machine information (e.g., year, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Condition: used, Year of construction: 2010, TA 5 compressed air refrigeration dryer, with a volume flow of up to 0.60 m³/min. Refrigerant: R134a Additional title: Compressed air dehumidifier Volume flow: 600 l/min. Overpressure: 16 bar Power: 0,29 kW Ppodpfjw Tduwex Amyew Current: 2,0 A Voltage: 230 V Frequency: 50 Hz Position: free standing

Condition: good (used), Year of construction: 1999, functionality: fully functional, Max. tabular load: 250 kg Psdezl Tn Aopfx Amyspw Max. total load: 20,000 (2 x 10,000) kg Number of seats: 45