Strapping machine

Brueninghaus SK-H315

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, 2 used Brüninghaus strapping machines SK-H 315, ideal for bundling slats Hardly used, in excellent condition Table size: 920 x 620 mm Voltage: 220 / 50 V / Hz Total power requirement: 0.77 kW Machine weight approx.: 100 kg Dimensions L x W x H: approx. 0.92 x 0.62 x 0.80 m Dedpfsw I Duyox Ab Tsla STRAPPING MACHINE - Semi-automatic for plastic strapping (approx. Ø 500 x 17mm) Strap feed located in lower cabinet Tabletop surface: chrome-plated Includes stop: LxWxH 345 x 80 x 20 mm, adjustable by approx. 32 mm Strap tension is set via a display on a linear scale. The strapping machine is mobile and easy to move (e.g. for varying lengths). 4 castors, 2 of which are braked. Ideal, for example, for bundling slats.

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height Dljdoh Nrh Uspfx Ab Tea max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Djdpov Ifxiofx Ab Tjla Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes Djdpfx Aber Ezyxo Tola

Condition: good (used), Year of construction: 2006, Compact and fast strapping machine with maximum package dimensions of approximately 600 mm wide x 600 mm high from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool changing and threading system. -Sealing type: Hot wedge welding. -Up to approximately 42 straps per minute. -Strap type: PP strap. -Strap width adjustable from 5-9 mm: Set to 5 mm. -Strap tension adjustable on the control panel. -Soft tensioning possible. -Standby function / power saving mode. -Sturdy foot pedal. -Low-maintenance and low-wear strap frame. -Movable and lockable via foot casters. Dledpfx Aopuy Iteb Tea The machine can be demonstrated with power on.

Condition: good (used), Year of construction: 2006, Year of Construction: 2006 - Speed: ~90.000 cph (product permitting) - min format product (head/foot x spine): 105 mm x 140 mm - max format product (head/foot x spine): 330 mm x 500 mm - max pagination: 96p tab & magazine, 32p digest & delta - Product orientation: Spine leading - Low Infeed - Infeed height (min/max in mm): ~560-970 mm - Waste gate - Stream Aligner / Jogger - Single squeeze roller - Laser Counter, model: Denex Edge Detector 2 - Upper bin height in mm: 200 mm - Upper Bin with Servo Lift System - two servo lifts - Turntable with compression plates - max Stack height in mm: 300 mm - Pneumatic pusher - Servo pusher - Delivery Direction to the left Dodpfxsh Itrfs Ab Tola - Delivery Direction to the right - Delivery height in mm: ~ 890 mm - Air Delivery Table included - Over all length equipment: 3272 mm - Over all width equipment: 1450 mm - Over all height equipment: 2056 mm - Input Power: 4,25 kW - Voltage: 400 VAC, 3Ph, N, PE - Air requirement: max 1020 Nl/min (Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. Dedpfepwgr Hox Ab Tola ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: excellent (used), 4 units Year of manufacture: 2006/2004/2003/2002 Strap width: 5 mm, 9 mm, or 12 mm. Strap tension: Infinitely adjustable, also with gentle tension for delicate items. Maximum package size: 600 x 600 mm (width x height). Sealing system: Heat-seal welding. Table height: Approx. 820–925 mm. Minimum package height: Approx. 10 mm. Maximum package weight: Approx. 25 kg. Strap material: Polypropylene (PP). Power supply: 230 V. Dodpjv Sq Rrjfx Ab Tola

Condition: used, Year of construction: 1994, Automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of manufacture: 1994 Maximum throughput width: 1000 mm Maximum cutting height: 120 mm Dedpfx Ajwdux Ajb Tela 2-rail variable Combi measurement with S-conveyor with cross-cut saw with Esterer ARS TR infeed with 2-blade chip separator New saw shaft, new bearings, and new chains 3 years ago. Has already been dismantled and is ready for loading at any time. Location: Austria, near Leoben

Condition: good (used), Lead screw lathe Mondiale Galic 16 Year of manufacture 1974 Distance between centers: 1000 mm Height of centers: 200 mm 40 – 2000 rpm Geometrically revised 4 years ago 3-axis digital display Multifix B with 5 cassettes Dlsdovzx Hgepfx Ab Tsa Coolant device Steady rest