Axle

BPW Dolly | Turntable for trailer | 12 Ton low spee...

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Godeig Hu Njpfx Afkjtt Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: good (used), Year of construction: 2008, Total Weight: 3500 kg Trailers weight: 866 kg trailer type: Three axle Gtodehqd Sijpfx Afkjt Trailer alomost not useed. It was used just several times for small deliveryeis..

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 01093.01-808, A used L&Z lathe, manufacturer: VDF BÖHRINGER, type: DUE 630, year of manufacture: 1986, machine number: 01093.01.-808. Turning length: 3000 mm Turning diameter: 630 mm. Equipped with 2 steadies, chuck, faceplate, and Multifix toolholder. Gtsdpfx Asxd Df Nsfkjt

Condition: like new (used), functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, gearing type: hydrostat, Year of construction: 2024, operating hours: 75 h, Agria 5900 Taifun Professional Hydro equipment carrier Technical details: Kawasaki 2-cylinder four-stroke petrol engine 23hp with electric start Gearbox: stepless hydrostatic drive with single-disk dry clutch Speeds: Forward: 0-7 km/h, Reverse: 0 - 3.6 km/h Steering bar: rubber-mounted and height and side adjustable without tools Steering: power steering (handle active steering) Tires: 23 x 8.50 - 12 AS Standard equipment: tires, service and parking brake, operating hour meter, manual start, electric starter, socket Fuel: unleaded petrol Weight: approx. 221.00 kg Special features: Intuitive steering with minimal effort thanks to Holm active steering Patented easy-control control unit for intuitive control Powerful professional motors guarantee sufficient power for all attachments Portal axle for shifting the center of gravity depending on local conditions and the attachment used Clearly visible even in poor visibility conditions thanks to LED safety lighting Standard support foot for convenient parking of the machine without an attachment Hydraulic safety valve: for secure hold even on steep slopes Optimized air intake reduces sucking in of dirt and dust Central parking brake Stepless hydrostatic drive for ideal adjustment of the working speed Robust and low-maintenance construction for continuous use under the toughest conditions Standard with operating hour counter Agria mounting flange for positive and non-positive connection between the base and attachment Powerful motors guarantee fast work with professional attachments Easy movement of the machine even without the engine running by releasing the wheels Possible Attachments Green space management: mowing, mulching, baling and belt rake Soil management: reversing tillers, harrowing Property and path maintenance: weed removal, snow clearing, snow blowing, spreading, sweeping Woodland maintenance: chopping bushes This Agria 5900 Cyclone Hydro tool carrier was built in 2024, has around 75 operating hours and has been used as a demonstration machine to date. The Cyclone is in as good as new overall condition, with minor signs of wear and tear, ready for immediate use. Sold as a used machine with no return, guarantee or warranty. Net price €18,479 // Gross price €21,990 - Inspection / test drive possible - Shipping costs €180 nationwide by freight forwarder! - Financing / leasing can be requested individually for you! Gjdpfev Ecdkex Afkett

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 Gtsdpfx Ajtlzdqofket -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: Godpfxein Ey Ss Afkett - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11470, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Godowhpavjpfx Afkott

Condition: ready for operation (used), functionality: fully functional, power: 51 kW (69.34 HP), fuel type: diesel, empty load weight: 5,500 kg, maximum load weight: 500 kg, axle configuration: 4x4, Year of construction: 1983, operating hours: 13,859 h, Truck/Tractor Unit MB-Trac 700K with hydraulic arm, registered as a tractor unit. We would be happy to demonstrate the vehicle for you. It is in good overall condition, fully operational, and immediately available. Technical specifications: Hydraulic arm: Tirre 9001 loading crane Max. outreach: 7.4 m Max. lifting capacity at max. outreach: 1,100 kg Max. lifting capacity at min. outreach: 1,100 kg Permissible total weight: 3,500 kg Transmission: 4-speed (split range/hare/tortoise gear) Engine: MB Daimler, 51 kW Displacement: 4 l Year of manufacture: 1983 Axle configuration: 4x4 Operating hours: 13,859 km Unladen weight: 5.5 t Gross weight: 6 t Gross weight with trailer: 40 t Gtodpfx Afsxvyv Ueket Body length x width: 104 cm x 220 cm Hydraulic connections for additional equipment at the front and rear + PTO shaft connection. The vehicle is equipped with four new tires plus a spare wheel.

Condition: used, machine/vehicle number: WKK6294101300xxxx, mileage: 400,000 km, Year of construction: 2005, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 21574 Specifications: 2005 model Gedpexp Ar Sjfx Afkjtt EU-approved until 18.05.2026 Approx. 400,000 km 408 hp Summer tires (see pictures) Winter tires (see pictures) 480-liter diesel tank 29 seats, 2 guide seats, and 1 driver seat LED light bar Rear-view camera Toilet Refrigerator Coffee machine Microwave Sink DVD player Includes 2 extra tables Electric sunshades at the front 4 subwoofers (the one in the back is not working) Tool cabinet 2 new alternators included Rust damage at the rear will be repaired before sale Manual transmission AC / climate control Delivery by agreement Description:Setra S411 tourist bus, 2005 model, with 29+2+1 seats and winter tires.The bus has a low mileage of approx. 400,000 km.Additional luggage space can be opened under the bus if needed.There are 4 subwoofers in total – the one at the very back does not work.Two extra tables are included, which can be installed by removing some seats.There is rust damage on the left rear side, but this will be fixed before the sale.Delivery available by arrangement. Km: 400000 HK: 408 Technical approved: Yes EU-approved until: 18.05.2026 Own weight: 13130 Total Weight: 18000 Payload: 4795 Width: 255 Length: 1010 Euro: 3 Model: S411 turbuss m/ 29+2+1 seter og vinterdekk. Lav km stand! Number of seats: 32

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Godpfx Afovyuuqjkett