Screw compressor

BOGE CLD 7-270

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Gtjdpfxst Ipi Io Ad Ueu Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm Gsdpfx Adsh Uuzyj Ujtu -Faceplate: 500 mm Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: new, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Gtjdpfecirniex Ad Uou Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: new, Year of construction: 2026, Fully equipped lathe with a lead screw and a feed shaft. Machine features Precise design 2 axes digital readout Large spindle bore – Ø 36 mm Heavily ribbed prism bed made of gray iron Inductively hardened and precisely ground bed guides Ensured accuracy of spindle tip better than 0.009 mm Accuracy of lathe chuck speed better than 0.04 mm Left/right switch on the control panel With a lead screw for threading or automatic longitudinal feed Lead screw and feed shafts in two sintered bearings Automatic longitudinal and transverse feeds Lead screw and feed shaft guard Knobs by the slides with adjustable 0.04/0.02 precise scaling Included by default set of change gears for threading Emergency stop button Smooth and efficient drive of excellent spindle speed adjustment VARIO model equipped with an inverter for smooth spindle speed adjustment! Digital speed indicator By default comes with a solid steel base Technical data Swing over bed 310 mm Swing over cross slide 190 mm Centre width 900 mm Bed width 180 mm Spindle bore 38 mm Spindle tip MK5 Spindle speed 80 – 2000 rpm (adjustment in 2 ranges) Metric thread (18) 0.2 – 3.5 mm/turn Godpfx Aoric Idsd Ujtu Inch thread (21) 56 – 8 TPI Longitudinal feed 0.085 – 0.832 mm/turn Transverse feed 0.01 – 0.1 mm/turn Maximum upper slide travel 65 mm Maximum transverse support travel 210 mm Maximum longitudinal support travel 650 mm Tailstock spindle travel 100 mm Tailstock quill diameter 38 mm Tailstock quill taper MK3 Motor power 1.5 kW / 230V Dimensions 1520×675×1320 mm Weight 295 kg

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW Godpod Rxw Hofx Ad Ujtu space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Godpfsv Rpn Tox Ad Ustu

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 10 h, Includes: Special iron turning tool ATRC 18 Special scroll bending tool ATAR 305 Spiral bending device ATSC Demonstration machine, no 10h worked! TECHNICAL DATA Shaft diameter mm. 30 Roller diameter mm. 128 Roller revolutions per minute rpm. 8.5 - 17 Drive motor Kw. 0.75 Main switch with release coil and built-in emergency (CP30 - CP30 R) - Reversing gear and double speed switch are mounted on a separate console (CP30 - CP30 R) - Foot switch Foot switch rotation control L/R with built-in emergency - (CP 30 PR) - Two-speed selector (CP 30 PR) - Mechanical regulation of the upper roller Mechanical regulation of the upper roller with position reading on display - Two traction rollers with ribbed surface Internal machine body made of steel - Steel shafts steel shafts, hardened and ground - Gear wheels made of special special steel with ground teeth - Rollers made of special steel with a hardness of 59/60 HRC - Outer cover in ABS - Working position horizontal (CP 30) Horizontal working position (CP 30) - Horizontal and vertical working position vertical (CP 30 R - CP 30 PR) Weight: CP 30 PR 240 kg. Gedpfx Adst Akxas Uetu External dimensions mm: CP30 PR Base 680 x 800 - Height 825 ACCESSORIES Straightening rollers with two positions - Universal rollers ( standard ) - Operating key Operating key - Operating instructions

Condition: used, Hydraulic power unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic power unit year of construction approx. 1985 operating pressure: max. 65 bar volume flow: 20 litres/min. tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L Gtsdpfxogprpgs Ad Uju - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and retracting a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 own weight: 142 kg good condition

Condition: good (used), Year of construction: 1998, Screw Compressor with Refrigeration Dryer KAESER Air Tower 11 Operating hours approx. 68,980 h Maximum operating pressure 9.5 bar Free air delivery at 7.5 bar: 1,145 l/min Motor power 7.5 kW Integrated KAESER refrigeration dryer automatic condensate separator incl. oil-water separator Kaeser Aquamat CF3 incl. oil-water separator Kaeser Aquamat CF6 Gtodextbpkjpfx Ad Uou Dimensions approx. L x W x H = 625 x 670 x 1285 mm Weight approx. 270 kg Note on used machines: • Technical data subject to errors and prior sale. • Prices stated are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if confirmed in writing. (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Manufacturer: WMW VEB Tip: FW 200×630 x-y-z: 380 - 140 - 230 mm. Gsdpfxoik Hcuo Ad Uetu Table size: 200x630mm