Box trailer

Blyss F1326HD | RAMPE 262X135X150CM 1300KG KOFFERANHÄNGER

Condition: new, empty load weight: 385 kg, maximum load weight: 365 kg, overall weight: 750 kg, loading space length: 2,510 mm, loading space width: 1,320 mm, loading space height: 1,520 mm, loading space volume: 4.9 m³, color: white, construction height: 2,080 mm, working width: 1,760 mm, Manufacturer: Humbaur Type: Box trailer, low-bed trailer HK 752513-15P Permissible total weight: 750 kg, unbraked Payload: 365 kg Unladen weight: 385 kg Box dimensions: 2510 x 1320 x 1520 mm Tires: 13 inches Loading height: 500 mm Rear with loading ramp, load capacity 300 kg Includes 100 km/h approval - V-shaped drawbar - Hot-dip galvanized - 13-pin connector and reversing lights - Floor panel, 15 mm thick Nsdpfx Afohrz Uxe Sedb - Side walls and roof made of multi-layer wood, 15 mm thick, with UV-resistant plastic coating - Interior light installed - Twist lock and hinges, galvanized - 6 tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra approved - Support wheel - Humbaur multi-function lighting integrated into the underrun protection Price includes vehicle registration document (registration certificate Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we will provide you with a free temporary registration plate for transport. We repair trailers from all manufacturers. Further accessories available on request. Subject to technical changes, price changes and errors. No liability is accepted for errors and printing errors. Rubber suspension axle, single-wheel suspension, box trailer, support wheel, side marker lights, twist lock and hinges galvanized, unbraked, including warranty, V-shaped drawbar, hot-dip galvanized, 13-pin connector and reversing lights, floor panel 15 mm thick, side walls and roof made of multi-layer wood 15 mm thick with UV-resistant plastic coating, interior light installed, single-leaf door with twist lock, 6 tie-down points in the frame profile, tensile force 400 kg per tie-down point, Dekra approved.

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 2,050 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, tail-lift, New vehicle: * German registration documents * Not registered * Driver's air-suspended seat * Electrically adjustable/heated exterior mirrors * 10-inch navigation system with DAB and touchscreen * Apple CarPlay & Android Auto * Cruise control * All-weather tires * Electric windows * Roof spoiler * Rear view camera * Reinforced springs on the rear axle Body: * Internal dimensions approx. L x W x H = 410 x 210 x 205 cm. * Through-loading height at the rear door approx. 10 cm lower than the loading area height * Outer walls: 24 mm sandwich panel * Roof: 24 mm sandwich panel * Dhollandia tail lift with a load capacity of 750 kg * Floor: 16 mm plywood Optional: * Side door * Tail lift Load securing equipment also available from us: * Tension and lashing straps * Load securing bars * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing options available We manufacture bodies of any size for any chassis. Materials: tarpaulin, GRP sandwich, aluminum. Visit us at: Ndsdpefq I Dwefx Af Ssb Bodies - Complete vehicles - Trailers - Consulting - Financing Errors and prior sales excepted, no liability for printing and input errors.

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Ndjdjdz Edqepfx Af Sob Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Condition: used, Year of construction: 2026, Yanigav Pile Driver MPEV600CT • Weight: 320 kg • Dimensions (LxWxH): 0.60 x 1.00 x 1.30 m • Blow rate: up to 1600 blows per minute • Impact energy: 170 Joules • Bell inside diameter: 80-120-140 mm Ndsdpfx Afsr Ezhre Ssb • Hydraulic requirements: 30 l/min - 130 bar pressure

Condition: new, functionality: fully functional, empty load weight: 365 kg, maximum load weight: 1,635 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,530 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS MP 305 153 2000 2 NEW VEHICLE Internal dimensions: 305 cm x 153 cm Sidewall height incl. rail: 43 cm Loading platform height: 51 cm Gross weight: 2,000 kg Payload: 1,635 kg Braked tandem low loader Overrun brake and handbrake by KNOTT 2 x axle with 1,350 kg brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels Steel rail Rear side panel fold-down and removable 15 mm thick, slip-resistant and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400 kg pull force 13" tyres M+S tires Net/rope hooks on the frame 13-pin connector Ndsdpfx Afsrk Iprj Seb Front marker lights Rear lights with reverse light, fog lamp, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front panel - Integrated loading ramps 2,000 kg - SARIS lightweight alloy wheels - Full LED lighting - Anti-theft lock - Fine- or coarse-mesh net - H-frame - Mesh extension in various heights, also enclosed - Flat cover with or without bows - High cover 180 cm - Rear supports Further accessories available on request! Plus freight to Gera and vehicle registration document €150 net Images are for illustration purposes and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 - 17:00 for repairs of all kinds. Specialist in axle repairs, also for caravans. Wide range of rental trailers. We also have a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by in person.

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Njdpfx Afovxryne Sjdb Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. Ndsdpsbnpgxsfx Af Seb - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: new, functionality: fully functional, empty load weight: 517 kg, maximum load weight: 2,183 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,560 mm, loading space width: 1,840 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS PL 356 184 2700 2 NEW VEHICLE Internal dimensions: 356cm x 184cm Side panel height: 35cm Loading platform height: 65cm Total weight: 2700Kg Payload: 2235Kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Foldable and removable on all sides 15mm thick, non-slip, and robust screen-printed plywood floor Automatic jockey wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflector OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE STARTING FEBRUARY 2026 Njdpogrwgkofx Af Sedb -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated loading ramps 2800Kg -Steel plate on the floor -Complete LED lighting -Theft protection -Net, fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm - 200cm Further accessories available on request! Plus shipping to Gera and vehicle registration document €200 net. Images are for illustrative purposes and may show optional accessories that incur an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist for axle repairs, including for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: W6378-04A, Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free), similar to, but not a Hammelmann, Woma, or Kamat. Permissible operating overpressure: 50-200 bar Recommended flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Year of manufacture: 2012 (unused) Suitable for use with demineralized water. Electro-pneumatic control: Takes over the switching command and pressure setting of the valve. Gap seal: Ensures the exact reproducibility of the actuation pressure. Further technical data can be found in the data sheet. Nodpfxjd D Agho Af Ssdb Maintains the operating pressure independently of the nozzle configuration. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high actuation reproducibility, high actuation dynamics, cone can be used on both sides.

Condition: used, Work area and workpiece capacity Travel range X-axis: 3110 mm Travel range Y-axis: 1620 mm Workpiece passage Y: 1,900 mm Workpiece passage Z: 180 mm Workpiece length in shuttle mode: 1,400 mm Table design: TV FLEX 1600 / FLEXMATIC Number of cross traverses: 6 Positions of traverses: 6 to 12 positions Axis speeds and drive data Maximum vector speed X/Y (PRO-SPACE): 56 m/min Maximum vector speed X/Y (PRO-SPEED): 78 m/min Speed of vertical drilling spindles: up to 8,000 RPM Speed of horizontal drilling spindles: up to 8,000 RPM Ndjdpfezuwurex Af Seb Max. speed of main spindle: 24,000 RPM Speed of grooving unit/circular saw: frequency-controlled, approx. 2,500-8,000 RPM CNC control and software Operating system: Windows 7 Display: 21.5" LCD Full-HD (16:9) Operation: Keyboard, mouse and machine control panel Software: Maestro CNC Programming: Parametric programming, graphic programming, ISO code, DXF import Machining functions: Milling, drilling, tool management, machining programs Simulation: Graphic simulation of drilling and milling operations TECPAD: 7" touchscreen for machine functions and error messages Mobile operation: Portable control panel for operation along the machine Drilling and grooving unit F23L Vertical drilling spindles: 13 independent spindles (7 clockwise, 6 counterclockwise) Horizontal drilling spindles: 10 independent spindles Arrangement of horizontal spindles: 4 spindles in the X direction on one side, 3 spindles in the X direction on the opposite side, 2 spindles in the Y direction Integrated sawing unit: Grooving and circular saw unit in the X direction Saw blade diameter: 125 mm Motor power of sawing unit: 2.2 kW (approx. 3 hp) Stroke of vertical drilling unit: 75 mm pneumatic stroke Stroke of horizontal drilling unit: 75 mm pneumatic stroke Frequency inverter: Programmable speed control up to 8,000 RPM 5-axis milling unit and tool changing system Main unit: JQX 5-axis milling unit Spindle type: Hiteco HSK-F63 electric spindle Power: 10 kW rated power Peak power (S6): approx. 9.5-15 kW Maximum speed: 24,000 RPM Bearings: Ceramic bearings Cooling: Liquid-cooled spindle Lubrication: Central automatic lubrication system Rear tool magazine TRB 14 Magazine positions: 14 Travel range: 350 mm Pitch: 115 mm Max. tool diameter: 240 mm Max. total tool weight: 70 kg Front tool magazine FAST 14 Magazine positions: 14 Max. tool diameter: 130 mm Max. tool weight per position: 8 kg Max. total weight: 24 kg Vacuum system, workpiece clamping and positioning Vacuum cups: 12 pcs, permanently mounted Dimensions of cups: 145 x 145 mm Height of cups: 75 mm Vacuum pump: Standard 1 vacuum pump Additional vacuum pump: 90 m³/h Workpiece supports: 4 pneumatic workpiece supports Rear stops: 8 aluminum stops Intermediate stops: 8 aluminum stops Side stop: Left reference stop with laser positioning Preparation for clamping cylinders: Prepared for 6 pneumatic clamping cylinders Extraction and compressed air Connection power: 23 + 28.5 kVA Compressed air consumption: 450 l/min Required extraction capacity: 4,500 m³/h Air velocity in extraction: 25 m/s Extraction nozzle: 250 mm