Sideloader

Baumann DX50/14/40

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,121 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 550 mm, fuel type: diesel, mast type: simplex, construction height: 2,800 mm, fork carriage width: 1,300 mm, fork length: 1,400 mm, empty load weight: 8,050 kg, total length: 4,680 mm, drive type: Diesel, construction width: 2,150 mm, Sideloader Load center of gravity: 700 Fork width: 200 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 8.25-15 Rear tires type: Pneumatic Fgodpfx Ajv U Eqfobkok Rear tires size: 8.25-15 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle over the counter, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DX50/14/40. P.S.: Our forklift workshop specializes in repairs, overhauls, and custom builds for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Nivo Fork Platform height: 1050 mm

Condition: new, Year of construction: 2025, machine/vehicle number: YBW92020, fuel type: diesel, motor manufacturer: Caterpillar 3516B HD, General information Field of application: Construction Fgjdpfx Aon An A Njbkek Weights Empty weight: 18.290 kg Functional Generator capacity: 2.500 kVA CE mark: yes Other information Fuel consumption: 453 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Transport dimensions (LxWxH): 6,38x2,29x2,37 Production country: DE Additional information Please contact Tijmen Pesselse, Kenny Bongers or Arjen van Dijk for more information

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 3,200 h, load capacity: 5,000 kg, lifting height: 4,000 mm, free lift: 600 mm, fuel type: diesel, mast type: simplex, construction height: 2,850 mm, fork length: 1,400 mm, drive type: Diesel, Sideload forklift Fjdpfsxqilbox Abkogk Load centre: 700 Mast type: Standard Condition: Limited operational capability Technical condition: Normal Front tyre type: Pneumatic Front tyre size: 300x15 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 300x15 Rear tyre condition: 40 - 60% Description: 1 hydraulic hose (steel) worn through, 3rd valve, 4th valve, Top pallet holder,

Condition: new, Year of construction: 2024, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 5 mm, coil weight: 4,000 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness copper (max.): 5 mm, sheet thickness brass (max.): 5 mm, cutting speed: 40,000 mm/min, product height (max.): 3 mm, working width: 600 mm, type of input current: three-phase, total width: 3,500 mm, total length: 12,000 mm, total height: 2,200 mm, Coil Slitting Line Satılık Rulo Sac Dilme Hattı 0.5 - 3 mm Thickness x 600 mm Width x 6 Ton Coil Weight Ideal line for production of Galvanized Grounding Strip production. Topraklama şeridi imalatı e dar bant dilimleme işlemleri için ideal bir hat. Please contact for further details. Fodpfx Aotpviqjbksgk #coil #slitting #coilslitting #slittingline #uncoiler #decoiler #slit #recoiler #tensioner #coilprocessing #earthing #grounding #grounding #GalvanizedGroundingStrip #GroundingStrip #Strip #topraklama #topraklamaseridi

Condition: new, Year of construction: 2022, A brand new generating set, consisting of two generators placed in one housing, based on Scania engines. Possibility of synchronization with other units or aggregates, and optionally also with the network. Maximum Power E.S.P. [kVA] / [kW] 902.0 / 722.0, Rated power P.R.P. [kVA] / [kW] 820.0 / 656.0, Driver type: ComAp InteliGen 500, Easy-to-use, intuitive graphical interface. Fgsdpsmrqi Eefx Abkjk

Condition: new, Year of construction: 2025, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics Fgsdpfoiq U Tqjx Abkek -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, used automatic edging line Möhringer Autojet S-singulator, infeed roller conveyor, through-feed cross-cutting automatic measuring table with infeed edging saw with double-lamella chip separator driven roller conveyor with pull-off device Fgedpfjw Tkt Hsx Abkek control system and electrical cabinet

Year of construction: 1995, condition: ready for operation (used), Manual edger DK 90 consisting of: 2 x under-table crosscut saws, line laser, edger, roller conveyor with slat separator, and tilting table. Naturally equipped with all associated control cabinets and hydraulic power unit. Additionally included are numerous templates and a fixed slat head. Inspection is possible upon prior and mandatory appointment. The price is exclusive of 20% VAT, ex works, excluding dismantling, loading, contract preparation, and customs clearance costs. Fjdpfjq U R Etsx Abkogk

Condition: new, Year of construction: 2025, Introduction Of Jaw Crusher Plant The capacity vary according customer request. And in order to meet the different demands of customers, the production line can equip with cone crusher, dust removal equipment and other equipment. It is suitable for the materials like hard limestone, granite,basalt, pebble, metallurgy slag and artificial sand making work. It is widely used in the industries of hydroelectric, building materials, highway, and urban construction. And according to different technological requirement, various types of equipment can be combined to meet the demands of different customers. Product Advantages of Stone Crusher Machine Plant 1.High reliability, good stability 2.Convenient maintenance, easy operation 3.Low operation costs, wide application range 4.Laminating crushing makes good discharging grain shape We also provide other stone crushing solutions like 1. Vibrating feeder + Jaw crusher + Fine jaw crusher + Vibrating screen 2. Vibrating feeder + Jaw crusher + Impact crusher + Vibrating screen 3. Vibrating feeder + Heavy hammer crusher + Vibrating screen 4. Sand Production Line 5. Gravel / Aggregate production line A stone crushing plant for sand and aggregate production involves several stages and equipment. Here's an overview of the process and the main components involved: Process Overview Fgedpfxeq Nyy Ej Abksk 1. Primary Crushing: Large stones from the quarry are fed into a primary crusher, typically a jaw crusher, which reduces them to smaller, manageable sizes. 2. Secondary Crushing: The output from the primary crusher is further reduced in size by a secondary crusher, usually a cone crusher or impact crusher. 3. Screening: The crushed material is separated into different size fractions using vibrating screens. Oversized material is returned to the crushers for further reduction. 4. Sand Making: For producing sand, the material might be passed through a sand making machine, like a vertical shaft impact crusher, to achieve the desired shape and size. 5. Washing: The final product is often washed to remove impurities and improve the quality of the aggregate. 6. Stockpiling: The finished product is stored in stockpiles before being transported to customers. Main Components of stone crushing plant 1. Jaw Crusher: Used for primary crushing of large stones. 2. Cone Crusher or Impact Crusher: Used for secondary crushing to produce finer aggregates. 3. Vibrating Screen: Separates the crushed material into different size fractions. 4. Sand Making Machine: Special equipment for producing sand. 5. Belt Conveyors: Transport materials between different stages of the process. 6. Vibrating Feeder: Feeds raw material into the crushers evenly and continuously. 7. Sand Washer: Cleans the sand by removing impurities. 8. Control System: Manages the entire process, ensuring efficient and safe operation. Implementing a well-designed stone crushing plant can significantly increase production efficiency and produce high-quality sand and aggregate.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Fgjdpfxofz I D De Abkek Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.