5-stage MEGA ŞIFANOZ

BALKAN DT-30

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 011, total height: 4,000 mm, total length: 33,000 mm, total width: 3,000 mm, Our machine is offered for sale as a complete line, including all auxiliary equipment, due to surplus capacity. The line comprises a guillotine, 6-phase mega shifanoz, press, and dust filter. The shifanoz machine is designed for opening and reclaiming waste cloth, offcuts, and trimmings. It has a reclamation capacity of 1,000 kg/hour. The line is located at our factory in the Textile Organized Industrial Zone, Uşak, Turkey. Serial no: 011 Capacity: 1,000 kg/hour Type: 6-phase Total line length: 33 meters Height of the press in the line: 4 meters Podpfx Aoxdhrgohvopp Height of the storage unit in the line: 4 meters Height of shifanoz machine: 2 meters Drum width in the line: 1.5 meters Line width: 3 meters

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER Pjdpswbil Ssfx Ahvjpp ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Ppodpsibbikjfx Ahvop Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 Ppodog Rn Iaopfx Ahvep TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: new, Year of construction: 2023, functionality: fully functional, space requirement width: 2,889 mm, space requirement length: 11,292 mm, space requirement height: 2,675 mm, overall weight: 36,000 kg, temperature: 150 °C, operating pressure: 6 bar, pressure: 6 bar, power: 110 kW (149.56 HP), type of input current: AC, operating temperature: 150 °C, Equipment: documentation/manual, Equipment Type: Dry Product Capacity: Circa 500kg/hr Design Conditions: 150oC; 6barg/ Full Vacuum Materials of Construction (Product Wetted): 304L SS, Viton O-Ring, PTFE Reinforced Flat Gaskets Electric Motor: 3 Pole / 480V / 60Hz, 110kW, 1780 rpm, Eex de IIB T4, IP 65; Horizontal, Single-Shaft, Continuous, Vacuum Kneader- Dryer Single step direct (contact) evaporation/drying process 3 heating zones on shell, 2 heating zones on agitator Twin screw feeder General Applications: Drying of products exhibiting multiple phase change e.g. Liquid –> highly viscous –> pasty–> free flowing powder or granular solid Ability to handle foaming, stickiness, crusting & required variation of temperature and drive input requirements Self-cleaning design and heavy duty/high torque to promote heat and mass transfer Pedpfet Uqldjx Ahvopp Potential Applications: Drying of a crystalline mass, e.g. Anti-Oxidants: Typical solvents: Methanol, Cyclohexane, Isopropanol Industrial Residues: Recovery of hazardous / valuable materials from wastes. E.g. TDI (Polyurethane monomer) from distillation residue Drying of paint and lacquer sludge Recovery of water/toluene from rubber residues Recovery of solvents from vitamin distillation residues Polymerisation Reactions..

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Pedpfx Aexg Ekfohvspp

Condition: like new (used), Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Ppsdpfx Ajv S E Dgehvep Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Psdpfx Ahshd N Dajvepp Sale from place.

Condition: new, Year of construction: 2021, Operating Area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 100m/min Ppodpfxsg D Nypj Ahvjp 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Ppjdpfjvl Skgsx Ahvep Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Injection pressure: 2500 bar Working hours: 38.035 h