Second-hand machinery for sale (2,395)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 543 h, Functionality: fully functional, machine/vehicle number: 797298, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, One robot will be auctioned (built in 2014; operating time 543 hours; serial number 797298) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Four-pack with robots built in 2013 and an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Cslewc Uaqon Ugu Njgt Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, turning length: 130 mm, spindle speed (max.): 12,000 rpm, spindle bore: 17 mm, bar passage: 13 mm, feed length X-axis: 30 mm, feed length Y-axis: 135 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840D Configuration: Dual electrospindles, dual C-axis Main spindle and moving headstock Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Spindle speed: 12,000 rpm Spindle stroke: 130 mm Counter spindle Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Max. spindle speed: 12,000 rpm Max. workpiece length in the counter spindle: 95 mm Max. workpiece length with front ejection: 130 mm mm Tool carrier Horizontal travel (X-axis): 2 × 30 mm Vertical travel (Y-axis): 135 mm Tool holder: 1 tool carrier Outside stations: 8 stations, 12 × 12 mm Inside tools: 3, mounting bore Ø 16 mm Driven tools Number of driven tools: 3 Tool holder: ER 11 / ET 1-12 Speed (2 stations): 6,000 rpm Speed (1 station): 2,000 rpm Cgsln Ugujwc R Ukj Nst Threading: Rigid threading Workpiece output: via counter spindle MACHINE DETAILS Machine dimensions (L × W × H): 1,830 × 950 × 1,717 mm Machine weight: 2,000 kg Cooling Coolant tank: 120 l Flow: 63 l/min Pressure: 2 bar Pneumatics Operating pressure: 6 bar Connection: Ø 10 mm Electrical data Supply voltage: 3 × 400 V / 50 Hz Max. power consumption: 21 kVA Cable cross-section: 10 mm² Fuses: 32 A, type AM Bar loader Standard diameter: Ø 2 – 16 mm Max. bar length: 3.2 m EQUIPMENT - FMB bar loader magazine Minimag type 3200 / 1205 A, built in 2002 - Diameter range for bar loader: Ø 2 – 13 mm - Workpiece output via counter spindle - Rigid thread cutting function - 3 driven tools - Dual C-axis with electric motors for main and counter spindle

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 2882-0127-39609, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Deckel Dialog 112 Cjln Ujwczz Uogu Negt Operating voltage: 3 x 400V Coolant system: Knoll 500 K-1, built in 1994 Information according to manufacturer - no guarantee Travel X / Y / Z: 1000 x 700 x 500 mm Spindle speed: 8,000 rpm Weight: 9.1 t Installation dimensions: 3.7 x 3.7 x 3.0 m

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1995, operating hours: 9,978 h, load capacity: 3,000 kg, lifting height: 5,960 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Lift height: 5,960 mm Free lift: 1,650 mm Load capacity: 3,000 kg Load center: 500 mm Mast type: Triplex, free lift Tire type: SE Motor: Electric Fork carriage and forks Fork carriage width: 3,410 mm Fork positioner: 420 / 2,810 mm Forks: 130 mm × 45 mm × 1,370 mm MACHINE DETAILS Cgeln Uguowcq Sco Njt Length: 3,060 mm Width: 2,540 mm Platform width: 1,350 mm Platform height: 440 mm Forklift height: 2,470 mm Mast height: 2,700 mm EQUIPMENT - Fork positioner

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,200 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, pressure: 4,000 bar, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64-bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Oil capacity: 130 l Cslnjwcqi Us Ugu Nogt Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Tank capacity: approx. 1,400 kg Flow rate: 2 kg/min Weight: 1,500 kg MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Pump operating hours: 1,200 h Electrical connection Connection: 400 V Total power requirement: 37.0 kW

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke distance: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Cgelewcn H Ren Ugu Nst Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797273 + 797258, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2013/2013; operating hours 2,154/14,355 h; serial numbers 797273/797258) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Cgjlswc T Tcsn Ugu Nst Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: good (used), Year of construction: 2002, operating hours: 5,600 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain TNC 426/30, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 18, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,200 x 500 mm Control system: Heidenhain TNC 426/30 Spindle Spindle speed: max. 6,000 rpm Spindle motor power: 7.5 kW Cgelnswcm U To Ugu Net Tools Tool holder: SK 40 Tool positions: 18 MACHINE DETAILS Machine weight: 5,100 kg Spindle running time: 5,600 h EQUIPMENT - Chip conveyor

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 182-69, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Connected load: 10 kVA Operating voltage: 3 x 400 V Weight: 4,000 kg Specifications according to manufacturer - no guarantee Travel X / Y / Z: 550 x 300 x 425 mm Tool changing system: Change arms Spindle speed: 10,000 rpm Cgeln Uowczxtogu Not Control system: Siemens Sinumerik Installation dimensions: 3.3 x 2.9 x 3.1 m Transport dimensions on pallet: 3,550 x 2,240 x 2,450 mm

Condition: excellent (used), Year of construction: 2005, operating hours: 5,607 h, Functionality: fully functional, machine/vehicle number: 181174, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Z-axis: 1,045 mm, swivel angle B-axis (max.): 225 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Machine type: 5-axis simultaneous & 5-axis freeform – CAP Tool System Year of manufacture: 10/2005 Max. swing diameter: Ø660 mm Max. machining diameter (upper/lower turret): Ø660 mm / Ø270 mm Max. machining length: 1016 mm X-axis travel (upper turret): 580 mm X2-axis travel (lower turret): 150 mm Z-axis travel (upper turret): 1045 mm Z2-axis travel (lower turret): 990 mm B-axis travel: 225° C-axis travel: 360° Chuck size: 8" Main spindle speed: 5000 rpm Main spindle bore: Ø51 mm Min. main spindle indexing: 0.0001° Chuck size 2nd spindle: 8" Speed of 2nd spindle: 5000 rpm Travel of 2nd headstock (W-axis): 1050 mm Rapid traverse speed of 2nd headstock (W-axis): 30,000 mm/min Min. indexing of 2nd spindle: 0.001° Turret type (upper): With ATC Tool shank height (upper): 25 mm Boring bar shank diameter (upper): Ø40 mm Turret type (lower): Drum turret with 9 stations Number of tools (lower): 9 tools Tool shank height (lower): 25 mm Boring bar shank diameter (lower): Ø32 mm Turret indexing time (lower): 0.14 s per switching operation Milling spindle speed: 12,000 rpm Milling spindle machining capacity: milling Ø100 mm, end milling Ø32 mm, drilling Ø30 mm, tapping M27 Rapid traverse speed X-axis (upper turret): 38,000 mm/min Rapid traverse speed X2-axis (lower turret): 38,000 mm/min Rapid traverse speed Y-axis: 26,000 mm/min Rapid traverse speed Z-axis (upper turret): 38,000 mm/min Rapid traverse speed Z2-axis (lower turret): 38,000 mm/min Rapid traverse speed C-axis: 400°/min Jog feed speed X-axis (upper turret): 2,000 mm/min Jog feed speed X2-axis (lower turret): 2,000 mm/min Y-axis jog feed rate: 2,000 mm/min Z-axis jog feed rate (upper turret): 2,000 mm/min Z2-axis jog feed rate (lower turret): 2,000 mm/min C-axis jog feed rate: 2,000°/min Tool shank / tool holder capacity: CAPTO C6 – 20 tools Max. tool diameter: Ø90 mm (Ø125 mm with free adjacent positions) Max. tool length: 300 mm Max. tool weight: 10 kg Cgoln Uguowcl Uxj Nst Tool change time (tool-to-tool): 1.3 s Main spindle motor (30 min / continuous operation): AC 22 kW / AC 15 kW 2nd spindle motor (30 min / continuous operation): AC 18.5 kW / AC 15 kW Milling spindle motor (20% ED): AC 15 kW Coolant pump motor: 1.2 kW Power consumption (continuous operation): 66.0 kVA Compressed air connection: 5 bar, 500 l/min Coolant tank capacity: 300 l MACHINE DETAILS Machine height: 2,597 mm Operating times: - Total time switched on: 2026:04'40" - Automatic operating time: 1323:07'43" - Automatic cutting time: 669:16'50" - Total cutting time: 5606:49'54" - Total operating time: 2028:04'40" EQUIPMENT Various machining tools included Test and demonstration on site possible

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,433 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Punching force: 220 kN Max. sheet thickness: 8 mm Max. Sheet thickness for stainless steel: 8 mm Max. Punching diameter: 76.2 mm Working area and workpiece Working area: 2,585 x 1,250 mm Max. Workpiece weight: 200 kg Speed and precision Max. Speeds: 100 / 60 / 116 m/min Accuracy: 0.1 mm MACHINE DETAILS Operating hours: 62,433 h Length: 6,100 mm Width: 6,760 mm Height: 2,500 mm Celn Uewcqf Njgu Negt Weight: 13,000 kg

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Max. drilling/tapping: Ø 8 mm / M6 Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW Cgslowcn Eyjn Ugu Njt X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Condition: ready for operation (used), Year of construction: 2010, operating hours: 2,239 h, Functionality: fully functional, machine/vehicle number: 796105 + 796713, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2006/2010; operating hours 147/2,239 hours; serial numbers 796105/796713) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Celn Uswc T Sxsgu Negt Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: good (used), Year of construction: 2006, operating hours: 10,700 h, Functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,200 x 500 mm Cgsln Uguswcm E Es Net Spindle & Tools Spindle speed: max. 8,000 rpm Spindle motor power: 15 kW Tool holder: SK 40 Tool positions: 24 Control Control system: Heidenhain iTNC 530 Handwheel: HR 410 MACHINE DETAILS Spindle running time: 10,700 h EQUIPMENT - Chip conveyor

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 4,020 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 600 mm, controller model: NUM AXIUM POWER, swivel angle A-axis (min.): -46 °, swivel angle A-axis (max.): 46 °, swivel angle C-axis (max.): 3,600 °, Machine including comprehensive accessories TECHNICAL DETAILS X-axis travel: 4020 mm Y-axis travel: 2020 mm Z-axis travel: 600 mm Support surface X, Y: 4,400 x 2,400 mm Axis angle A, B: ± 46° Rotation axis C: ± 3,600° Repeatability: ± 0.1 mm Positioning speed: 10 m/min Max. machining temperature range: +10°C to +40°C High-pressure pump Design pressure: 420 MPa Operating pressure: max. 400 MPa Continuous operating pressure: max. 380 MPa Flow rate: max. 3.8 l/min Drive power: 37 kW Control & electronics Control: NUM AXIUM POWER Drive system: NUM MDLU 3 Rated motor power: 2 kW Control unit: Rittal PC cabinet with air conditioning unit Control system: Integrated CNC/PLC Measurement system: High-resolution SinCos encoder Software System software: CAD/CAM including 32-bit Windows software Import formats: HPGL, DXF Functions: Automatic approach strategies, jet correction, material database, cutting control, pressure and abrasive control Cjlswbvgion Ugu Nsgt Operating parameters Max. waterjet operating pressure: 4,000 bar MACHINE DETAILS Dimensions (L x W x H): 6,400 x 3,200 x 3,100 mm Machine weight: approx. 10,500 kg Connections Pneumatic connection: min. 6.5 bar Water connection: 2–5 bar Connection values: 400 V AC, 16 A Control voltage: 24 V DC EQUIPMENT - Manual handheld control unit - Double safety light barriers - Abrasive cutting set - Abrasive dosing system with reservoir - Abrasive pressure feed system - Approx. 3 t of cutting sand - Various nozzles, seals, wear and replacement parts

Condition: ready for operation (used), Year of construction: 1984, Functionality: fully functional, total length: 1,400 mm, total width: 1,600 mm, total height: 2,200 mm, pressing force: 8 t, TECHNICAL DETAILS Tool holder: Euronorm Type EU 1 (441) Number of stations: 37 Capacity: max. 266,000 tablets/h Pressing data Pressing force: max. 80.0 kN Pre-press force: max. 20.0 kN Tablet thickness: max. 8.5 mm Tablet diameter: max. 25 mm MACHINE DETAILS Space requirement: 1,400 x 1,600 x 2,200 mm EQUIPMENT - Filling curves for 10 mm, 14 mm & 18 mm filling depth - Tableting tool not included. Celn Uswbu Ufogu Nogt

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 81154, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 4,000 rpm, turning diameter: 360 mm, bar passage: 60 mm, TECHNICAL DETAILS Control: Siemens 840D Machining area Bar capacity: Ø 60 mm Spindle bore: Ø 66 mm Turning diameter (effective): 300 mm Cgslowc Sa Uen Ugu Net Permissible turning diameter: 360 mm Turning length: 600 mm Center distance: 870 mm Spindle Spindle mount: ISO-A6 Speed range: 0 – 4,000 rpm Power: 15 kW (S1) Tool turret Turret system: Baruffaldi VDI Tool stations: 12 Driven tools: 6 Travel paths X-axis travel: 190 mm Z-axis travel: 650 mm Rapid traverse speed X/Z: 18 m/min Tailstock Tailstock movement: manual via keystroke or M-code Condition and Special features Filter system: Mist extraction currently out of service EQUIPMENT - LNS Super Hydrobar hydraulic bar loader (Swiss made) - SMW-AUTOBLOK chuck type 210HYN-S - Tool package with clamping jaws and VDI tool holders - Turret with 6 driven tools - Programmable tailstock control

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 Cgolnowcnube Ugu Not TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Cgeln Uguewc Ucfs Njt Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, Functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) Cjlowc Ryajn Ugu Nsgt External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness (max.): 12 mm, working length: 4,100 mm, TECHNICAL DETAILS Sheet length: 4,100 mm Sheet thickness: 12 mm Backgauge: 1,000 mm Sidegauge: 1,500 mm with scale, T-slot, and tilting cam Sheet support arms: 2 x 1,000 mm, with T-slot Total power requirement: 30 kW Control and drive Control: ELGO (for backgauge) Backgauge drive: Motorized, on recirculating ball screws, foldable Knives Lower blade: 4-way reversible Upper blade: 2-way reversible MACHINE DETAILS Dimensions (L × W × H): 5,350 × 2,250 × 2,250 mm Weight: approx. 16,300 kg Cgelnowcqzks Ugu Nst EQUIPMENT - Swing-cut design - Clearly arranged control panel mounted on a swivel arm - Adjustable cutting length for efficient processing - Hydraulic hold-down devices positioned close to the cutting edge - Foot switch - Central manual cutting gap adjustment - Easy blade replacement and resharpening - Operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 50 h, Functionality: fully functional, Multihead Weigher + Flow Wrapper Machine has only 50 operating hours! TECHNICAL DETAILS Maximum number of bags: 50 bags/min Multihead Weigher CM-B10 Weighing Heads: 10 Weighing Range: 10 - 1,000 g Volume (max.): 1,300 ml Flow Wrapper E-250 Film Roll Diameter (max.): 450 mm Bag Width: 50 - 250 mm Coln Ugjwbu Sqju Negt Bag Length (max.): 400 mm Current Setting – Bag Width: 155 mm Current Setting – Bag Length: 350 mm EQUIPMENT - Film holder for rolls up to 450 mm - Manual filling via central hopper - Ring-shaped weighing heads

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 9809133, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 625 mm, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Type: 4-axis horizontal machining center Control: CNC Yasnac J300M Travel paths X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 625 mm Pallet system Pallet size: 500 × 500 mm Number of pallets: 2 Pallet indexing angle: 0.001° Tool changer Tool positions: 120 Tool interface: ISO 40 Spindle Spindle speed: 15,000 rpm Cooling: Internal cooling through spindle Feed rates Coln Ugewc R E Nsu Nogt Rapid traverse: 24 m/min Working feed: 1 – 10,000 mm/min MACHINE DETAILS Power supply: 380 V / 50 Hz / 67 kVA Machine weight: 11.5 t EQUIPMENT - Twin pallet system - Yasnac J300M CNC control system - Internal spindle cooling - Large tool changer (120 positions) - ISO 40 tool holder

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, machine/vehicle number: 12940, pressing force: 50 t, working length: 2,550 mm, stroke distance: 120 mm, TECHNICAL DETAILS Press force: 50 t / 500 kN Motor power: 5.5 kW Axes: Y1, Y2, Z Cslnowcqttj Ugu Nsgt Working area Bending length: 2,550 mm Stroke length: 120 mm Cylinders: 2 Speeds Lowering speed: 100 mm/s Pressing speed: max. 13.5 mm/s Retraction speed: 75 mm/s Hydraulics Oil tank: 100 l MACHINE DETAILS Length: 2,750 mm Width: 1,100 mm Height: 2,050 mm Weight: approx. 3,500 kg EQUIPMENT - Hydraulic tool clamping for the upper tool - Darley system

Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: H-H40611, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Big Plus spindle recently replaced + internal coolant supply TECHNICAL DETAILS Travel X / Y / Z: 1067 / 610 / 610 mm Spindle speeds: 12,000 rpm Rapid traverse X, Y, and Z: 30 m/min Power: more than 15 kW Tool changer: 24 positions, ISO 40 Control: WinMax Ultimax 4 Table: 1270 x 610 mm Table load: max. 1350 kg EQUIPMENT Cjln Uguswc R Dxs Nogt - Chip conveyor - Oil cooler - Electronic handwheel - Internal coolant supply