Second-hand machinery for sale (2,399)

Year of construction: 2004, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28860011684, TECHNICAL DETAILS X axis: 1000 mm Y-axis: 600 mm Z-axis: 600 mm Control: SIEMENS SINUMERIK 810 D POWERLINE rotational speed: 10.000 rpm tool places: 24 tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT Debvm Uspvlbnjk Nout IKZ 15 bar, 800L tank Chipping machine Flushing gun X-Y-Z AxBs measuring system

Year of construction: 2005, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS load capacity: 9550 kg Tires: L 6 Drive: Diesel MACHINE DETAILS own weight: 19,9 t engine: Perkins, 134 kW Transmission type: W Dusbvm Ukspq R Tke Not

Year of construction: 2007, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity/load: 4,99 t load center: 500 mm load distance: 535 mm Wheelbase: 2078 mm Lifting speed: 0.49 / 0.53 m/s Lowering speed: 0.54 / 0.51 m/s Axle load with load front/rear: 10355 / 1215 kg Axle load without load front/rear: 2880 / 3700 kg Tires: SE Tire size front: 315 / 70-15 (300-15) Tire size rear: 250 / 70-15 (250-15) Track width front: 1190 mm Track width rear: 1122 mm Turning radius: 2745 mm Inclination mast / fork carriage: 5,0 / 9,0°. Height of mast retracted: 2421 mm Height of mast when extended: 3916 mm Duobvjpq R Hlom Uk Not Height above protective roof: 2416 mm Free stroke: 150 mm Lift: 3000 mm MACHINE DETAILS weight: 6580 length: 4116 mm width: 1448 mm Engine: VW CPYA; 55 kW Consumption: 4,6 l/h Driving speed: 24 km/h Tractive force with/without load: 25285 / 22375 N

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Automation system of the Wittmann brand was newly installed in 2016 and used on a Netstal Synergy 2000. All documents, operating instructions, maintenance plans, measurement diagrams etc. included as well as control modules, power supply units and control panels. The Wittmann Picker can be used as a stand alone. TECHNICAL DETAILS travel X / Y / Z: 900 / 1800 / 3000 mm payload: 15 kg Scope of delivery: robot, console, support V/2614-3104, adapter, conveyor system standard MB belt, SE protective enclosure incl. safety door with SIPA MACHINE DETAILS dimensions plant (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE mains voltage: 400 V Duobvm Ukepm Htgs Net tolerated voltage fluctuations: up to 10% connected load: 11 kVA frequency: 50-60 Hz tolerated frequency fluctuations: up to 2% supply line fuse: 16 A air pressure: max 6 bar maintenance of system functions: up to min 5 bar

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm Dobvm Ukepgrzcj Neut MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Year of construction: 2022, operating hours: 0 h, Condition: new, Functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Dujbvm Ukspdqr Es Njt Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Dusbvm Usn Uum Hjk Net Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Year of construction: 2006, operating hours: 46,547 h, Condition: excellent (used), Functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min Dsbvm Uksn Nxw Dj Nout MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Year of construction: 2001, Condition: good (used), Functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Dsben Arnxsvm Uk Neut Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Year of construction: 2007, Condition: good (used), Functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance Dujbvmsnl Dzxj Uk Net TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Year of construction: 2002, Condition: used, Functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Dsbvmsnh R Nke Uk Nout Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m

Year of construction: 2008, Condition: good (used), Functionality: fully functional, machine/vehicle number: 1540503266A, TECHNICAL DETAILS X axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Control: Heidenaihn İTNC 530 Dujbvm Ueng Amvsk Nst Number of tools: 30 Tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT Direct path measuring system X,Y,Z Measuring probe Heidenhain TS640 Spindle conveyor Operating mode 4

Year of construction: 2018, Condition: like new (used), Functionality: fully functional, little used round cycle plant with 8 stations TECHNICAL DETAILS diameter machine bed: approx. 5000 mm weight: approx. 42 t Machine color: RAL 7035 light gray / base RAL 7016 anthracite Documentation: according to SEMA standard in German incl. CE marking on CD Hinged belt conveyor / cutter pump: built into base frame with hopper Lifting pump: 550 l/ min make KNOLL Coolant: 2500 I, 500 l/min (4 bar) Dujbvonfvymsm Uk Njt EQUIPMENT - complete machine base frame - rotary table RTT 1200 NC controlled - rotary feed-through for the hydraulic supply - 8 x triple clamping devices externally mounted: 2 hydraulic three-jaw chucks each with integrated cylinder (clamping force: 40 kN/ 40 bar) - coolant tank system with pump for flushing - 14 lubrication points, piping and valves (lubricant: emulsion) - paper belt filter make KNOLL STATIONS Station 1: Feeding and unloading by robot - The part is clamped on the shaft. Station 2: Turning of the head contour (2-fold) - NC- feed slide SL 45-NC z-direction - 2 x facing unit SEMA PDE (without tools) spindle distance: 300 mm - 2 x facing head LAT-160-2-32 Station 3: Turning station via handling gripper (2-fold) - Part is now clamped at the machined head Station 4: Thread rolling (2-fold) - part is clamped at the head and supported in the hexagon - NC- feed slide SL 45-NC z-direction - 2 x spindle unit SEMA SE 100 (without rolling head and rollers) - 2 x torque support by hexagon socket - counterpart is inserted, turned to stop and disconnected Station 5: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 6: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 7: Milling longitudinal grooves with support on shank side - 2 x spindle unit SEMA SE 70, HSK 63 (without tools) - NC- feed slide SL 35-NC x-direction - NC- Feed slide SL 35-NC y-direction - NC- Feed slide SL 45-NC z-direction - 2 x pneumatic three-jaw gripper on console Station 8: Thread deburring with deburring ring - 2 x spindle unit SEMA SE 55 (without tools) - NC- feed slide SL -NC z-direction - complete pneumatics make FESTO incl. piping - complete hydraulics make BOSCH/Rexroth or Parker incl. piping - central lubrication system make SKF incl. piping - swivel control panel with control panel front OP010C/PCU50 and keyboard - Control panel with control make SIEMENS 840 D-S7/ 24 NC axes - NC program for one workpiece - Complete cover with sliding doors (partially transparent) - pedestal

Year of construction: 2013, operating hours: 10,422 h, Condition: ready for operation (used), Functionality: fully functional, Replacement disc (+ two-component adhesive) included! ECHNICAL DETAILS digging depth: approx. 6.451 mm reach: approx. 8.380 mm tires: 10.00 x 20 Weight: approx. 18 t Fuel type: Diesel Engine power: 128 kW / 172 PS Transport dimensions L x W x H: 8300 x 2810 x 3190 mm Duobvmonad Npo Uk Net EQUIPMENT - with clamshell bucket - with dozer blade - solid rubber tires - outriggers left/right

Year of construction: 2017, Condition: as good as new (ex-display), Functionality: fully functional, TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 800 mm spindle speed: max. 0 - 17.000 rpm table size: 500 x 500 mm table load: max. 800 kg diameter workpiece: max. 800 mm height workpiece: max. 800 mm Rapid traverse speed: 60 m (for X,Y and Z axis) Control: Siemens 840DSL spindle: Kessler Torque: max. 60 / 80 Nm tool magazine: HSK-A63 40 tools ATC Dusbvm Ukelk H U Rj Nst MACHINE DETAILS Power: 26 / 35 kW EQUIPMENT - linear scales - pallet changer - belt filter

Year of construction: 2020, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: KE-TR6536-C-A-442, Stockpile conveyor for direct feeding via crushing / screening plant. TECHNICAL DETAILS stockpile capacity: up to 300 t/h at an angle of repose of 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg Debvmsmv E Igj Uk Neut FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2002, Condition: used, Functionality: fully functional, Horizontal machining center with double chain magazine. TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm control: Siemens Sinumerik 840D B - axis: 360 x 0,001 ° spindle speed - stepless: 8.000 rpm feed X/Y/Z/ axis: 1 - 60.000 mm/min feed B axis: 9.250 °/min rapid traverse X/Y/Z: 60.00 m/min feed force X/Z: 9.600 N Feed force Y: 8,000 N drive power 40 % ED: 20,00 KW driving power 100% ED: 13,00 kW Tool holder: SK40 Torque at 40% / 100% ED: 191 / 124 Nm Pallet size: 2x 400 x 500 mm workpiece weight: max. 600 kg tool magazine: 180 tool diameter: 90 mm tool diameter with 2 free places: 160 mm tool length: max. 350 mm Tool weight: max. 3.50 / 12.00 kg MACHINE DETAILS total power requirement: 65,00 kW machine weight: approx. 16,00 t space requirement: approx. 9.00 x 4.50 x 3.50 m EQUIPMENT Coolant system with IKZ Double chain magazine with 180 places Chip conveyor BLUM tool laser measurement Duobenh Rn Aovm Uk Nst electronic handwheel

Year of construction: 2006, operating hours: 82,068 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Dsbvm Ukomt A Ivo Njut Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits

Year of construction: 2007, operating hours: 63,000 h, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS X-way: 725 mm Z-way: 200 mm chuck diameter: 160/200 mm swing diameter: 725 mm Main spindle: 2 pieces Control: Siemens 840D Duobvmemrqtvs Uk Net spindle flange (DIN 55026): 5 size Spindle bearing: 80 Ø - front Maximum speed: 6500 min-1 spindle distance: 955 mm Main drive: 2 pieces AC asynchronous motor 44/100 % ED: 24/16 kW Maximum power: 24 kW Full power from spindle speed: 1500 min-1 Torque 44/100 % ED: 153/102 Nm Rapid traverse speed X: 60 m/min Rapid traverse speed Z: 30 m/min Feed force in X and Z: 5.5/11 kN Ball screw diameter in X/Z: 50/40 mm Typewriter turret straight shank adaptor DIN 69880: 2 x 12 pcs. Shank diameter: 40 mm MACHINE DETAILS Operating voltage: 400 V Control voltage direct current: 24 V Control voltage alternating current: 230 V frequency: 50 Hz Connected load: 45 kW Supply line fuse: 100 A machine length: 3500 mm machine width: 2300 mm machine height: 2500 mm machine weight: 12000 kg Operating hours: 63000 h EQUIPMENT Documentation Hinged chip conveyor Coolant cleaning with 2 pumps Cooling system 2x jaw chuck

Year of construction: 1998, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm MACHINE DETAILS weight: 11.000 kg Duobvmjmkhyne Uk Net space requirement: 3720 x 2180 x 3170 mm

Year of construction: 2006, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 002092059405, TECHNICAL DETAILS x-way: 360 mm z-way: 2000 mm speed range: 1800 rpm center height: 340 mm turning diameter: 680 mm Control: Fanuc 21i-T tool holder: Parart turning length: 2000 mm tailstock: KM5 Dobvm Uomkhlpsk Nsut chuck diameter: 315 mm spindle bore: 104 mm MACHINE DETAILS Machine weight: approx. 6.3 t Parts total: 174.782 pieces Control switch-on time: 26,457 h Automatic time: 241 h Feed time: 5,846 h

Year of construction: 2004, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 1143 000084 3, TECHNICAL DETAILS X-axis movement: 780 mm Y-axis movement: 560 mm Z axis movement: 560 mm B-axis movement: +30° to -120° C-axis movement: 360° stepless Control: Heidenhain iTNC 530 spindle speed range: 0 - 12 000 rpm Dobvm Uksmiilbj Neut tool holder: ISO SK 40

Year of construction: 2017, operating hours: 80 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: B3070, little used press brake TECHNICAL DETAILS pressing force: 290 t working length: 3100 mm distance between columns: 2550 mm working height: 400 mm Opening width: 515 mm Control system: Cybelec DNC 60 stroke: 250 mm table width: 80 - 220 mm speed: 0 - 150 mm/s pressing speed: 0 - 10 mm/s reset speed: 0 - 120 mm/s MACHINE DETAILS hydraulic pressure: 275 bar Machine power: 18,5 kW machine length: 4900 mm Machine width: 1935 mm Machine height: 2890 mm Machine weight: 20.500 kg EQUIPMENT - 1 x tool 30, 5 x 104 mm, 1000 kN/m - 3 x tool 30, 5 x 104 mm, 1000 kN/m - 1 x tool 88, 3 x 103.5 mm, 500 kN/m - 3 x tool 88, 3 x 103.5 mm, 500 kN/m - 1 x Matrix 85, V 80 mm, H 80 mm, W 95 mm - 3 x Matrix 85, 5 x 104 mm, 1000 kN/m - 1 x Matrix 85, V 40 mm, H 60 mm, W 60 mm - 3 x Matrix 85, V 40 mm, H 60 mm, W 60 mm Djbvomidm Tem Uk Neut - 1 x Matrix 88, 16 x 120 mm, 1000 kN/m - 3 x Matrix 88, 16 x 120 mm, 1000 kN/m

Year of construction: 2007, operating hours: 16,500 h, Condition: good (used), Functionality: fully functional, machine/vehicle number: NH631GF0405, LPP System (Linear Pallet Pool) automation system with 12 pallets only 16,500 spindle hours TECHNICAL DETAILS travel X / Y / Z: 1050 x 900 x 980 mm B-axis: 360 Control: MSX-701 Maps 3 speed: 8000 rpm tool holder: BT 50 number of tool places: 140 number of pallets: 12 table clamping surface: 630 x 630 mm table load: 1500 kg MACHINE DETAILS dimensions: 3,37 x 5,97 x 3,41 m weight: 19 t total power requirement: 64,7 kVA spindle hours: 16.500 Switch-on time: 127.000 Dsbvmsmfrtwo Uk Nout

Year of construction: 2006, operating hours: 109,000 h, Condition: excellent (used), Functionality: fully functional, Horizontal machining center with 6-fold pallet station Machine has run only in aluminum - new spindle in 2020 TECHNICAL DETAILS X-axis: 700 mm Y-axis: 800 mm Z-axis: 800 mm NC rotary table, B-axis 0.001 Dujbvm Ujmfrgnok Njt spindle speed: max. 18000 rpm control: SIEMENS 840D Shopmill clamping area: 500 x 500 mm table load: max. 800 kg workpiece diameter: max. 800mm workpiece height: max. 900mm tool holder: HSK 63 tool changer: 180 positions spindle power: max. 30 kW torque: 5.000 Nm Holding torque: 5.000 Nm rapid traverse/feed rate: 60 m/min Feed force in X/Y/Z: 10 kN EQUIPMENT - chip conveyor - Pallet station 6 pallets - Automatic tool measurement 3 D wireless probe M+H - Coolant system with paper belt filter - IKZ system with belt filter, 40 bar 30 tool pockets in the magazine are defective.