Second-hand machinery for sale (2,431)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 77,341 h, Functionality: fully functional, table length: 2,740 mm, table width: 1,800 mm, pressing force: 315 t, ram stroke: 160 mm, TECHNICAL DETAILS Total pressing force: 315 t Stroke: 160 mm Adjustment: 100 mm Dksb E Imiju Unl Tswsl Stroke at bottom, adjustment at top: 1,050 mm Dimensions Distance between uprights L-R: 2,740 mm Distance between the uprights sideways: 1,500 mm Distance between the oil drip pans: 2,400 mm Table clamping surface: approx. 2,740 x 1,800 mm Ram clamping surface: approx. 2,400 x 1,700 mm Performance and speed Number of strokes: 10 - 60 min-¹ Control type: Siemens S5 MACHINE DETAILS Power requirement: 75.5 kW Operating hours: 77,341 h Height above floor: approx. 5,500 mm Dimensions (L x W x H): 5,400 x 3,300 x 5,700 mm Machine weight: approx. 80 t EQUIPMENT - Hydraulic tool clamping

Condition: good (used), operating hours: 6,300 h, Functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Machine comes from renowned medical technology company TECHNICAL DETAILS Control system: Siemens Djb E Iju T Rcromiwjkl X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Table size: 1,200 x 560 mm Max. Table load: 1,000 kg Spindle hours: approx. 6,300 h Spindle Speed range: 20 - 12,000 rpm Interface: SK 40 Tool changer Capacity: 30 tools EQUIPMENT - Infrared sensor - IKZ (internal coolant supply) - Chip conveyor - Rinsing gun - Signal lamp - Suction unit - Preparation for 4th axis - Cabin roof

Condition: excellent (used), Year of construction: 2021, operating hours: 3,349 h, Functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 25, Equipment: documentation/manual, Machine including WH3 cell The bidder is obliged to collect the machine by 31.12.24! TECHNICAL DETAILS X-travel: 700 mm Y-travel: 420 mm Z-travel: 380 mm Table dimensions: 840 x 420 mm Rapid traverse: 60 m/min Control: 3-D Control Siemens 840D solutionline Screen size: 19 inch Main spindle Max. Speed: 24,000 rpm Power: 4/20 kW Max. torque: 78 Nm Spindle interface: ISO 7388-2 J30 (BBT30 compatible) Cooling: Water cooling for spindle motor and spindle with heat exchanger Tool changer Capacity: 25 places Type: BT30 disk magazine Chip-to-chip time: 1.6 seconds MACHINE DETAILS Operating pressure: 6 bar Tank capacity: 600 liters Weight: 4030 kg Deb E Iou T Rawjmiwekl Operating hours: 5,883 h Program run time: 4,653 h Spindle time: 3,349 h EQUIPMENT - Integrated direct path measuring systems for X, Y, Z - IKZ (internal cooling lubricant supply) - Blast air through spindle center - Paper belt filter with 40 bar operating pressure - Chip container with strainer basket - Full cabin cladding incl. cabin roof - Rotating viewing window - Flushing gun - Oil and emulsion mist separator - Documentation German/English Production equipment - Profibus automation interface - MPC (machine protection through rapid shutdown) - Blum efficiency package (TC-52 infrared measuring system with tool breakage monitoring) - DMG MORI IoTconnector - Lehmann dividing head, indirect measuring system, 4-fold rotary feed-through

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, TECHNICAL DETAILS Condition: Mechanically workshop tested Application: Punching, embossing, waste stripping, depaneling Specifications Sheet size (max.): 740 x 1,050 mm Sheet size (min.): 350 x 400 mm Max. Punching force: 3.0 MN Speed: 9,000 sheets/h Processable materials Dksb E Imeu T Hatsiwel Paper (min.): 80 g/m² Cardboard (max.): up to 2,000 g/m² Corrugated cardboard (max.): up to 4 mm EQUIPMENT - Z + H Non-Stop feeder - stripping station - Gripper edge separation - Centerline system - Rolling cloth for non-stop system - 1 set of tools, frame - Operator platform

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, working width: 1,000 mm, product height (max.): 35 mm, product height (min.): 10 mm, product length (max.): 2,500 mm, product length (min.): 290 mm, product width (max.): 1,000 mm, product width (min.): 230 mm, TECHNICAL DETAILS Working width: 1,000 mm Feed speed: 8 - 40 m/min Control system: IMATRONIC 152 manufactured product Product: Box furniture, sides + bottoms, 4-sided edging and sizing Product length: 290 - 2500 mm Product width: 230 - 1000 mm Product thickness: 10 / 35 mm Product speed: 60 m/min Min. strip length (roll material): approx. 300 mm Min. strip height (roll material): approx. 14 mm Max. Strip thickness (roll material): approx. 3.0 mm Min. workpiece length: approx. 150 mm Min. workpiece thickness: approx. 10 mm Max. Workpiece thickness: approx. 45 mm Max. Workpiece size: approx. 35 mm (temporarily possible) Workpiece distance and width Min. workpiece projection from chain track, per side: approx. 35 mm (plus edge thickness) Dksb E Imiju Ttp Uewsl Max. Workpiece projection from chain conveyor, per side: approx. 80 mm Min. throughfeed width with workpiece projection 35 mm: approx. 230 mm MACHINE DETAILS Mains voltage: 2 × 400 V Control voltage: 24 V Design: Left-hand machine, stop side left EQUIPMENT AND AGGREGATES - Feeding device: With three inclined, rubberized rollers, can be folded up by hand. - Pneumatic pressure rollers: For lateral pressure, controllable. - Metal detector: 2 pieces, detection of small metal parts in the edge area. Detection width 80 mm, workpiece height: 30 mm, workpiece projection 10 - 90 mm - Cutting units: Double cutting units with vertical adjustment and 4.4/6.6 kW motor power. 6000 rpm, tool diameter 200 - 250 mm - Routing/profiling units: Swivel routing units with height sensing and mechanical digital readouts. 6000 rpm - Hot melt adhesive feeder (654232): QuickMelt with 2.5 kW heating power and 50 kg granulate tank. Melting capacity 10 - 12 kg/h - Milling units: For rough and fine milling with 6.6-8.0 kW motors and digital control. - Cross-cut unit: cross-cut height 50 mm, cross-cut thickness 2.5 mm, edge 30 m/min, 2 HM cross-cut saw blades 160 x 22 mm - Trimming unit for rough trimming: 2 x 1000 W, 12,000 rpm, with height sensing, side sensing - Trimming unit for fine trimming: 2 x 150 W, 12,000 rpm, with height sensing, side sensing - Trimming unit for profile trimming: 2 x 600 W, 18,000 rpm, with height sensing, side sensing - Profile scraper units: For subsequent smoothing and polishing of profiles. - Scraper unit: Removal of hot-melt adhesive residue from the edge area - Buffing units: For polishing PVC edgeband profiles. - Smoothing units: For smoothing and rounding off profiles. - and more - see PDF \/

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece height (max.): 520 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control system: Siemens 840D X-axis: max. 720 mm Y-axis: max. 600 mm Z-axis: max. 500 mm Distance spindle nose - table: 150 - 650 mm Diameter of the table clamping surface: Ø 600 mm Max. Table load: 500 kg Clamping grooves (number x width x pitch): 5 x 18 H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Max. Workpiece size: Ø 700 x 520 mm Machine accuracy (VDI / DGQ 3441) Positioning accuracy: ±0.005 mm / 300 mm Repeat accuracy: 0.005 mm Resolution of the axes: 0.001 mm Linear axis position measuring system: Heidenhain rotary encoder Position measuring system rotary axes: Heidenhain direct encoder Main spindle Type: AC motor direct drive Speed range: 20 - 15,000 rpm Torque (25% ED): max. 34 kW / 180 Nm Spindle cone: SK 40 DIN 69871 Spindle probe: Renishaw OMP 40 Tool changer Capacity: 60 tools Max. Tool diameter: 76 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool breakage detection/measurement: Renishaw NC4 "Split Laser" laser Axis drives X, Y, Z axes: Siemens AC motors B, C axes: AC motors Siemens Dob Eju Tq Hqj Imiwokl Travel speed Rapid traverse X, Y, Z: max. 36 m/min B-axis speed: max. 25 rpm C-axis speed: max. 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system I (external) Tank capacity: 240 l Operating pressure (external): 0.9 bar Coolant system II (IKZ) Pressure: 42 bar (paper belt filter) MACHINE DETAILS Operating pressure: 6 bar Width with scraper belt chip conveyor: 3,384 mm Width without scraper belt chip conveyor: 2,407 mm Depth: 3,490 mm Max. height: 2,864 mm Control panel swivel radius: 1,380 mm Transport dimensions (L x W x H): 4,685 × 2,588 × 2,864 mm Installation dimensions (L x W x H): 4,963 x 4,665 x 3,005 mm Weight: 10,500 kg Total connected load: 35 kVA EQUIPMENT - Linear roller guides in all axes - Automatic machine switch-off (M30 Power Off) - Digital axis and spindle drives - Scraper belt chip conveyor (discharge height: 800 mm) - Chip trolley - External coolant supply - Flushing and air gun - Spindle blow-out system - Full protective cladding (without cabin roof) - Data interfaces (USB 1.1 + Fast Ethernet) - Set-up elements, adjustment screws and work area lighting - Operating instructions, circuit diagram and programming software (CD-ROM) - Operating tool - Air cooling inside/outside - Automatic side doors - AOF extraction duct

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 10857, installation height: 2,200 mm, pressing force: 315 t, table width: 2,500 mm, table length: 1,000 mm, ram stroke: 1,100 mm, TECHNICAL DETAILS Total pressing force: 315 t Ejector force: 2 x 125 kN Ejector as hold-down device: 2 x 250 kN Stroke: 1,100 mm Tool weight on ram max.: 6,000 kg Installation height: 2,200 mm Dkjb E Imieu Unlgjwjl Table clamping surface: approx. 2,500 x 1,000 mm Ram clamping surface: approx. 2,500 x 1,000 mm Speeds Rapid traverse from: 600 mm/s Working speed: 32 - 230 mm/s Rapid traverse up: 600 mm/s MACHINE DETAILS Power requirement: 158 kW Machine weight: approx. 44 t Height above floor: approx. 6,175 mm

Condition: good (used), Year of construction: 1999, Functionality: fully functional, feed length X-axis: 200 mm, feed length Z-axis: 675 mm, bed width: 300 mm, rotational speed (max.): 4,000 rpm, TECHNICAL DETAILS Control: Heidenhain Manual Plus cycle control Handwheel: Electronic handwheel Travels X-path: 200 mm Z-path: 675 mm Machining area Bed width: 300 mm Spindle speed: 4,000 rpm Tool system Turret: 8-fold EQUIPMENT - Movable control panel - Half cabin - Work area lighting - Chip tray with coolant device under the machine bed - Free-standing switch cabinet - Automatic central lubrication Dob E Imsu T Hx Noiwokl - Monitored work area safety doors - Collet chuck - Manual gear range selection in 3 stages

Condition: good (used), Year of construction: 2013, Functionality: fully functional, quill stroke: 200 mm, quill diameter: 125 mm, spindle speed (min.): 2 rpm, spindle speed (max.): 1,600 rpm, Price reduction - now particularly favorable! No minimum price - guaranteed sale at the highest bid! Dkeb E Imiju Tquzowsl TECHNICAL DETAILS Control system: R&D control system MTCK/EuroTurn Maximum feed force X/Z: 10.1 / 20.7 kN Quick-change holder: Multifix size D Tailstock Quill diameter: 125 mm Maximum quill stroke: 200 mm Taper sleeve: MK6 Filling quantities Central lubrication: approx. 6 l Hydraulic unit spindle and gearbox: approx. 35 l Torque and power 1st gear, 40%/100% ED: 9,287 / 6,136 Nm 2nd gear, 40%/100% ED: 3,906 / 2,580 Nm 3rd gear, 40%/100% ED: 2,516 / 1,662 Nm 4th gear, 40%/100% ED: 1,058 / 699 Nm Power 40%/100% ED: 56 / 37 kW Speeds 1st gear: 2 - 137 rpm 2nd gear: 5 - 213 rpm 3rd gear: 17 - 505 rpm 4th gear: 58 - 1,600 rpm Reduction ratio Belt: 1.992 1st gear: 13.079 2nd gear: 5.500 3rd gear: 3.543 4th gear: 1.490

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, machine/vehicle number: 2287, drilling depth: 1,200 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 560 mm, workpiece weight (max.): 5,000 kg, TECHNICAL DETAILS CNC control: Siemens Sinumerik 805M Drilling range Full drilling range (single-lip): Ø 3-30 mm Drilling range (single-lip drilling): Ø 40 mm Drilling depth (Z-axis): max. 1,200 mm Traverse paths Horizontal cross travel (X-axis): max. 1,600 mm Vertical travel (Y-axis): max. 560 mm Dsb E Iou Td E Hemiwokl Depth travel (Z-axis): max. 1,200 mm Horizontal longitudinal travel (W-axis): max. 500 mm Table width Table width: 1,200 mm Table length: 1,200 mm Table movement (Z-axis): max. 500 mm Table load: max. 50,000 N Workpiece weight: max. 5,000 kg

Condition: good (used), Year of construction: 2016, operating hours: 13,701 h, Functionality: fully functional, machine/vehicle number: 276209, turning diameter: 255 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 1,125 mm, swing diameter over bed slide: 660 mm, TECHNICAL DETAILS Chuck size: 10 inch Maximum swing circle: max. 660 mm Standard turning diameter: max. 255 mm Maximum turning diameter: max. 360 mm Largest bar passage: max. Ø 80 mm Distance between spindle nose and turret edge: 59.5 - 1,179.5 mm Maximum weight (bar work): max. 500 kg Maximum weight (chuck work): max. 450 kg Spindle Speed: 35 - 4,000 rpm Shape of spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Acceleration time: 2.3 s Motor power (30-minute power/continuous power): 26/22 kW Maximum torque (15%ED): 465 Nm Tailstock Quill type: MT No 4 Movement stroke (tailstock body): max. 1,075 mm Minimum and maximum thrust: min. 1,000 N, max. 5,000 N Tools and turrets Dksb E Imou Tdi Ejiwol Number of tools: 12 pieces Outer chisel tool sizes: max. Ø 25 mm Internal turning tool sizes: max. Ø 40 mm Tool sizes router bits: max. Ø 20 mm Tool sizes end mills: max. Ø 20 mm Tool sizes for milling taps: max. M20 (3/4 UNI) × 2.5 mm Turret Switching time (next/opposite position): 0.23/0.62 s Milling spindle motor power (40%ED/continuous power): 5.5/3.7 kW Milling spindle speed: max. 6,000 rpm Maximum torque of the milling spindle (40%ED): max. 47 Nm Feed axes Rapid traverse X/Z: max. 30/33 m/min Time constant X/Z: 65/80 ms Travel range X: max. 225 [220 + 5] mm Travel range Z: max. 1,125 [1,120 + 5] mm MACHINE DETAILS Spindle center height: 1,020 mm Overall length: 3,385 mm Overall width: 1,720 mm Total height: 1,820 mm Space requirement: 5.82 m² Mass of the machine: 6,050 kg Mass of the machine (with steady rest): 6,250 kg Connected load: 44.5 kVA Voltage: 400 V Coolant tank volume: 270/315 l Machine package: 3.87 x 2.16 x 2.01 m, 6.62 t Chip conveyor package: 3.54 x 0.87 x 1.35 m, 325 t

Condition: excellent (used), Year of construction: 1997, operating hours: 64,905 h, Functionality: fully functional, machine/vehicle number: 501637, bar diameter: 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: Irco RBK 7212, year of manufacture 1999 Bar length: 1 m Bar diameter: 65 mm Turret and spindle Turret: 2 pieces, 8 places each, VDI30, 4 driven tools each Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck MACHINE DETAILS Operating hours: 64,905 h Dimensions incl. bar loader and chip conveyor (LBH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Fixture for finished parts - Cooling system - Chip conveyor Dksbsu Tc Dzo E Imiwsl - Documentation - Various guide tubes for the bar feeder - including 2 tool holders

Condition: ready for operation (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 84/20.5917, ram adjustment: 160 mm, table width: 1,600 mm, table length: 1,600 mm, ram stroke: 250 mm, pressing force: 250 t, TECHNICAL DETAILS Total pressing force: 250 t Dkob E Iju Unc Sjmiwol Stroke: 70 / 250 mm Adjustment: 160 mm Ejector force: 20 t Ejector stroke: 10 mm Control type: Siemens S7 Installation height Bottom stroke, top adjustment: 520 mm Dimensions Distance between the uprights at the side: 1,300 mm Table clamping surface: approx. 1,600 x 1,600 mm Ram clamping surface: approx. 1,600 x 1,600 mm Performance and speed Number of strokes: 0 - 50 min-¹ Power requirement: 33 kW Roller feed Belt width: 1,250 mm Belt thickness: 0.3 - 1.6 mm MACHINE DETAILS Height above floor: approx. 5,500 mm Machine weight: approx. 58 tons

Condition: excellent (used), Year of construction: 2014, operating hours: 13,175 h, Functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, TECHNICAL DETAILS Control system: SIEMENS SINUMERIK 840 D 3D control system X-travel: 1,150 mm Y-travel: 700 mm Z-travel: 550 mm Spindle Speed range: 20-18,000 rpm Interface: SK 40 Operating times Switch-on time: 48,384 hours Spindle hours: 13,175 hours EQUIPMENT - Double gripper device incl. direct manual tool loading into the tool magazine - Infrared measuring probe - Direct stroke measuring system incl. air barrier protection - MPC (machine protection through quick shutdown) Dsb E Imou T Hp Ieiwokl - Air blast through the center of the spindle - Internal cooling lubricant supply (IKZ) - Paper belt filter with 40 bar operating pressure - Chip conveyor, bed flushing, cabin roof - Rotating viewing window - Flushing gun for chip flushing - Mechanical oil and emulsion mist separator - Active cooling unit for switch cabinet - No handwheel

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 2009-0030, bending angle: 180 °, pipe diameter: 51 mm, pipe length: 4,500 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Primary application: Production of titanium tubes (2 inch). Tube properties Dimensions: 2" (50.8 × 0.71 mm) Material: Titanium Ti - P99002 (welded tube, not for hydraulic applications) Bending ratio: 1.5 x D (1.0 x D technically feasible) Tube retraction length: 4500 mm Bending properties Operation: In one plane or as rotary draw bending of tubes and profiles. Dobsu Tqplo E Imiwekl Bending angle: max. 180° + springback (with overbending of 20-30° due to springback of the titanium). Axes and control Bending axis CNC axis with bending angle: 0 - 180° + springback Accuracy: ±0.1° Bending speed:

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, pressing force: 130 t, throat depth: 3,000 mm, distance between stands: 2,700 mm, stroke distance: 200 mm, TECHNICAL DETAILS Pressure: max. 130 t Djb E Imou S Rcpoiwskl Folding length: max. 3,000 mm Distance between the uprights: max. 2,700 mm Stroke: max. 200 mm Total power requirement: 7.5 kW Control system: Amada OP 2000 Controlled axes: y1, y2, x1, x2, z1, z2, r Recording: Amada-Promecam EQUIPMENT - Lasersafe Fissler for increased safety - 2-hand foot switch

Condition: refurbished (used), Year of construction: 2021, Functionality: fully functional, Complete debarking line - Completely overhauled Cambio 45 debarking system incl. feed and metal detector. Feeder Shard finder Dsb E Ijuv Echsmiwjkl Debarker Conveyor Etc.

Condition: like new (used), Year of construction: 2022, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: AL-001-0007, laser power: 200 W, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 100 mm, HIGHLIGHTS - Very fine laser spot for the finest geometries - Powerful laser - High powder yield - Reliable printing process thanks to intelligent AL3D-OS software - Small footprint 600 × 617 mm Deb E Iou S H E Hjmiwekl - Closed gas circuit for reduced gas consumption - Low energy consumption - Unpacking station: Clean separation of the sintered component from unused residual powder + collection of the residual powder for possible reuse TECHNICAL DETAILS Installation space size: d = 100 mm, h = 100 mm Resolution: 50 µm Laser & optics Laser type/wavelength: fiber laser 200 W CW, 1070 nm Focus diameter: 50 µm Scanning speed: max. 5 m/s Process parameters: Open access to all machine and process parameters software Operation: 15.6" touchscreen, keyboard and mouse possible Connectivity: Ethernet; 2 × USB Software: AL3D-OS, offline version for project creation Remote access: TeamViewer External software: Autodesk Netfabb, Materialise Magics, CIM Systems Pyramis Software interface: Open interface for external postprocessors File format: CAD import STL Print preparation: Simple support generation; slicer integrated in software Materials Material: Metal powder, grain size fraction 10-45 µm Alloys: Iron, nickel-based, cobalt-chromium, precious metals, reactive metals (others on request) Component density: > 99 % Layer thickness: 10 - 50 µm MACHINE DETAILS Machine dimensions Weight: approx. 180 kg W × D × H: 600 × 617 × 1,770 mm Unpacking station dimensions Weight: approx. 100 kg W × D × H: 600 × 617 × 1,770 mm Operating hours: 70 h Electrics & connection Electrical connection: 230 V, 50 Hz / 60 Hz, max. 16 A Permissible humidity: max. 70 % Permissible ambient temperature: 15 - 30 °C Shielding gas/argon connection: 4.5 - 6 bar inlet pressure, Ø 6 mm hose connection Gas consumption in operation: < 5 l/min Gas consumption purge function: 20 l/min Unpacking station Vacuum cleaner connection: NW32 connection EQUIPMENT - 3D printer - Unpacking station - 9 print cartridges.

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle speed (max.): 24,000 rpm, Provision: FCA - loading equipment must be provided by the buyer - can be borrowed from Homag TECHNICAL DETAILS Workpiece lengths: max. 6,000 mm (single), max. 2,375 mm (pendulum) Workpiece lengths for workpiece Ø 25 mm: max. 6,175 mm (single), max. 2,550 mm (pendulum) Front workpiece width: max. 1,150 mm (all units) Workpiece width at the front for routing with 25 mm diameter: max. 1,220 mm Front workpiece width for gluing: max. 1,220 mm Workpiece width at the rear: max. 1,400 mm (all units) Workpiece width at the rear for routing with 25 mm diameter: max. 1,550 mm Rear workpiece width for gluing: max. 1,475 mm Rear workpiece width with standard flush trimming and gluing: max. 1,500 mm Workpiece thickness: max. 300 mm including clamping device (router) Workpiece thickness with standard clamp: max. 60 mm Workpiece thickness: min. 12 mm (chamfer milling) Workpiece thickness: min. 16 mm (radius milling or min. 2 x radius + 10 mm) Spindle and tool changer Main spindle: 15 kW, HSK F63 Spindle speed: 24,000 rpm C-axis: with unit interface Plate changer: 18-position, D = 130 mm Tool weight: max. 6 kg Tool weight incl. holder for units: max. 10 kg Drilling head Spindles: 30 (V20 / H10 / S360° "MPU") Drill head motor: 2.7 kW, frequency-controlled Speed: max. 7,500 1/min Vertical spindles: 20, high-speed, arranged in a U-shape (3 rows with 11, 3 and 6 spindles) Horizontal spindles: 10, arranged in pairs (4 pairs with 32 mm pitch, 1 pair 320 mm apart) Sawing and routing Grooving and cutting saw: saw blade Ø max. 200 mm Attachment milling spindle for drilling head: 6 kW (for S6 operation) FLEX-5 FLEX-5 sawing, milling and drilling unit: for tool changer C-axis extension for FLEX-5 unit: Coupling element for C-axis Gluing unit POWER EDGE gluing unit: For gluing edge material to straight workpiece edges Edge height: max. 105 mm (gluing unit BAZ222/322) Workpiece thickness during edging: max. 100 mm Further units Flush trimming unit: for tool changer Dsb E Imisu Sz Nyewekl Combined flush trimming and scraper unit: WD 100 mm Combination snipping and corner rounding unit: traced Lock case trimming unit: 2 spindles, D = 16/20 mm EQUIPMENT - with gluing unit - with FLEX-5 unit - Chip conveyor belt: for B200/52-72 - LED position indicator: Console 1,300-1,600 mm - LED position indicator for precise workpiece handling - Extended workpiece processing options thanks to flexible unit system - without tools The technical data and descriptions are taken from a copy of the order confirmation at the time. Data is for information only and is not binding.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 02260001501, turning length: 600 mm, turning diameter over cross slide: 324 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 635 mm, indexing of C-axis: 0.025 °, TECHNICAL DETAILS Control system: SIEMENS Max. circulation diameter: 680 mm Circulation diameter via X-guide: 565 mm Max. turning diameter: 324 mm Max. turning length: 600 mm Main spindle Spindle head diameter (flat flange): 170h5 mm Max. bar diameter: 65 mm Spindle diameter (front bearing): 120 mm Spindle bore: 79 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 5,000 rpm Torque S1, 100% ED: 270 Nm Buckling speed: 900 rpm C-axis (main spindle) Speed: 250 rpm Holding torque: 200 Nm Pitch accuracy: 0.025° Counter spindle Spindle head diameter (flat flange): 140h5 mm Max. bar diameter: 42 mm Spindle diameter (front bearing): 90 mm Spindle bore: 57 mm Drive power S1, 100% ED: 25 kW Speed range: up to max. 7,000 rpm Torque S1, 100% ED: 160 Nm Buckling speed: 1,500 rpm C-axis (counter spindle) Speed: 250 rpm Holding torque: 120 Nm Pitch accuracy: 0.025° Cross slide (X/Y/Z) Face travel (X): 185 mm Longitudinal travel (Z): 635 mm Vertical travel (Y): +40 mm Rapid traverse speed (X/Y/Z): 60/15/45 m/min Feed force (X/Y/Z): 3.5/7/7 kN Ball screw (Y): 40x5 mm Ball screw (Z): 40x15 mm Counter spindle (Z2) Dksb E Imisu T Hmmowjl Longitudinal travel: 666 mm Input speed: 45 m/min Ball screw: 40x15 mm Tool carrier Driven tools: 12 Shank diameter (VDI 69880): 40 mm Max. power: 9.4 kW Torque: 20 Nm Speed range: up to max. 4,500 rpm MACHINE DETAILS hydraulic system Capacity: 10 l Pump output: 2.2 kW Max. pressure: 80 bar Clamping device and tailstock pressure: 10-60 bar Coolant device Capacity: 210 l Pump capacity: 1.7 kW Delivery rate (at 6 bar): 20 l/min Electrical power requirement Connected load: 50 kVA Operating voltage: 400 V Frequency: 50 Hz Fuse protection: 80 A Voltage fluctuation: +6%/-10% Bar loader Manufacturer: Breuning Notes - The tools shown in the turret are not part of the auction. - The collets for the collet chuck are included.

Condition: excellent (used), Year of construction: 2013, operating hours: 4,173 h, Functionality: fully functional, turning length: 455 mm, turning diameter: 250 mm, rotational speed (max.): 3,000 rpm, swing diameter over bed slide: 450 mm, bar passage: 65 mm, TECHNICAL DETAILS Control: FANUC Swing diameter: max. 450 mm Swing diameter over turret: max. 375 mm Turning diameter: max. 250 mm Turning length: max. 455 mm Travel X: max. 190 mm Travel Z: max. 480 mm Rod diameter: max. 65 mm Spindle and tool Speed: max. 3,000 rpm 3-jaw chuck 12-position turret: VDI 30 C-axis: integrated Driven tools: available MACHINE DETAILS Operating hours: 4,173 h Machine weight: 3,800 kg EQUIPMENT - Tool measurement in the machine - Tailstock - Chip conveyor - Coolant device Dkob E Imeu S Rbxsiwol - Parts catcher

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, total height: 4,460 mm, load capacity per storage section: 15 kg, payload: 45,000 kg, TECHNICAL DETAILS General information Number of storage locations: 15 pieces System height: 4,460 mm System length: 1,500 mm System width: 3,000 mm Dsb E Iou S N Rlemiwskl Payload: max. 45 t

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, pressing force: 220 t, bending length: 3,000 mm, stroke distance: 180 mm, TECHNICAL DETAILS Pressure: max. 220 t Folding length: max. 3,000 mm Stroke: max. 180 mm Control: Delem DA 58 Dkjb E Ieu S N Htsmiwol Controlled axes: y1, y2, x, r, z1, z2 Tool holder: Amada-Promecam MACHINE DETAILS Total power requirement: 17 kW Machine weight: approx. 12,000 kg Dimensions: 3,660 × 2,380 × 2,800 mm EQUIPMENT - Safety doors behind the machine - 2-hand foot switch

Condition: good (used), Year of construction: 2011, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, swivel angle A-axis (min.): -110 °, swivel angle A-axis (max.): 90 °, Hedelius 5-axis machining center TECHNICAL DETAILS Control: CNC Heidenhain iTNC 530 X-path: max. 1,200 mm Y-path: max. 650 mm Z-travel: max. 520 mm Traverse path rotary swivel range in X: max. 500 mm Fixed machine table travel range in X: max. 570 mm A-axis: +90° / -110° C-axis: 360° Tables Swivel rotary table dimensions: 520 × 420 mm Interfering edge diameter: max. 610 mm Fixed table dimensions: 700 × 600 mm Spindle and tool Spindle holder: SK 40 Speed: 30 - 8,000 rpm Drive power: 22 kW Tool changer: 30-fold MACHINE DETAILS Machine weight: approx. 8,500 kg Dimensions: 3,600 × 2,650 × 2,800 mm EQUIPMENT - NC rotary swivel table on the right - Fixed table on the left - Electric handwheel - IKZ (20 bar) - Chip conveyor Dob E Iju Sqtqjmiwekl

Condition: excellent (used), Year of construction: 2015, operating hours: 3,500 h, Functionality: fully functional, travel distance X-axis: 960 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 12,000 rpm, swivel angle A-axis (min.): -42 °, swivel angle A-axis (max.): 120 °, 5-axis universal machining center TECHNICAL DETAILS Control: CNC Heidenhain ITNC 530 X-path: max. 960 mm Y-path: max. 600 mm Z-path: max. 480 mm A-axis: 120° / -42° C-axis: 360° Table Table dimensions: 560 × 365 mm Table load: max. 200 kg Dksbsu Sqr Ts E Imiwol Spindle and tool Spindle speed: max. 12,000 rpm Cone holder: BBT 40 mm Spindle / table distance: 100-580 mm Tool length: max. 300 mm Tool weight: max. 7 kg Cooling and measuring technology Coolant: Coolant through spindle (CTS) Tool probe: Renishaw Oil cooler: integrated MACHINE DETAILS Operating hours: approx. 9,000 switch-on hours, approx. 3,500 spindle hours Machine weight: approx. 7,000 kg Space requirement: approx. 3,100 × 2,200 × 3,070 mm EQUIPMENT - IKZ (internal cooling) - Electric handwheel - Chip conveyor - Direct measuring system