Second-hand machinery for sale (2,431)

Condition: good (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 4760, turning diameter over cross slide: 500 mm, feed length X-axis: 740 mm, feed length Z-axis: 450 mm, spindle bore: 130 mm, spindle speed (max.): 710 rpm, spindle speed (min.): 1 rpm, TECHNICAL DETAILS Spindle mount according to DIN 55027: size 15 Spindle bore: 130 mm Spindle diameter in the front bearing: 220 mm Main drive Drive power (100/60% ED): 38/46 kW Speed I: 1 - 250 rpm Max. torque: 6,000 Nm Performance data of the X-axis Travel path X: 740 mm Feed force: 14 kN Speed: 8 m/min Performance data of the Z-axis Travel path Z: 450 mm Feed force: 18 kN Speed: 8 m/min Dksb Ehev Rcl Ss Dnzol Working area Chest opening: 650 mm Swing diameter of the cheek opening: 1,400 mm Swing diameter of the face slide: 500 mm Turning tool cross-section: 32 mm x 32 mm Workpiece mass faceplate: 21 t Center of gravity distance: 250 mm MACHINE DETAILS Machine weight: 7.4 t Dimensions (L x W x H): 3.7 m x 2.5 m x 2.1 m Electrical data Voltage: 400 V Frequency: 50 Hz

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, The machine was recently partially overhauled at a cost of €15,000! The machine features six high-quality grinding motors, a spur motor, and turbines. TECHNICAL DETAILS Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm Travel paths X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Taper grinding: max. 16° Table Table size: 600 x 380 mm T-slots: 6, 10 mm wide, 50 mm spacing Table load: 300 kg Tool holder and speeds 22S: E23 Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 80S speed: 40,000 - 80,000 rpm T10/T16: Ø 3 mm T10/T16 speed: 100,000 / 160,000 rpm Groove grinder: 2,900 - 34,500 rpm Planetary motion: 5 - 250 rpm C-axis: 0 - 5 rpm Feed rates X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measurement accuracy: 0.001 mm Basic deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ Mains pressure: 5 bar Space requirement: 3.5 x 4.4 m Machine height: 3.5 m Power consumption: 8.3 kVA Weight: 3.1 t EQUIPMENT - Groove grinder - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter Debsv Rck Uj Eh Dnzskl - Coolant system - Extraction system - High-quality accessories included

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Dkjb Eh Dnsv Rb Hhszsl Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: as good as new (ex-display), Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Screw conveyor: for one cup size Ring length adjustment device: adjustable in millimeters Gear motor: with Danfoss inverter Maximum speed: 6,000 cups/h Installation: for operation in a production line Machine structure Frame: completely clad in stainless steel Control cabinet: stainless steel with Omron PLC Safety devices: made of stainless steel Sensors & safety Light barrier at the entrance: regulates speed according to the flap Dob Eev Rblqjh Dnzskl Clogging protection: at the machine exit Light barrier: for adjusting the film length Further information according to the manufacturer - without guarantee Installation dimensions: 6.0 x 1.6 x 2.0 m Weight: 1.5 t Sleeve length: 30 - 300 mm Cup height: 100 - 360 mm Cup diameter: 35 - 115 mm Motor power: 0.37 kW Production capacity: 1000 - 9000 cups/h

Year of construction: 2016, Condition: good (used), Functionality: fully functional, machine/vehicle number: ZPR/M/2016/000016, No reserve price - guaranteed sale at the highest bid! Description: The machine sorts fruit by diameter and color depending on the selected program option. The roller discharge system discharges fruit sideways onto one of six collection chutes. TECHNICAL DETAILS Capacity: 1.5 - 2 t/h Installation Dimensions: 8.8 x 8.4 m Electrical Connection: Electrical connection only at the bin tipper; all other components are modular along the line. Area of Application: Small and medium-sized farms Function: Sorts fruit by diameter and color, e.g., apples Ejection System: Roller discharge discharges fruit sideways onto six collection chutes. Additional Equipment: Automatic bin tipper or roller conveyor. Operation: Electronic, user-friendly control panel. Other: Connecting conveyors can be removed to allow complete packing on all chutes. EQUIPMENT - Automatic container tipper - 1 unit - Conveyor with infeed belt - 1 unit - Inspection roller conveyor - 1 unit - Variable-speed "V" conveyor - 1 unit - MONO-type sorting machine - 1 unit - Packing table - 6 units - Scales - 5 units Djb Ehev Ra Uqo Dnzekl - Conveyor to filler PTO-1 L = 2.6 m - 1 unit - Conveyor to filler PTO-1 L = 2.0 m - 1 unit - Automatic container filling system - 2 units

Condition: refurbished (used), Functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, empty load weight: 53,050 kg, Year of construction: 2012, operating hours: 13,200 h, machine/vehicle number: 835.5.1445, Very good overall condition! The engine and wear parts were replaced in 2024 - total overhaul cost approx. €70,000 No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Unladen weight: 53,050 kg Fuel type: Diesel MACHINE DETAILS Total operating hours: approx. 13,200 h Engine running time: approx. 160 h (since replacement) Dkjb Eh Dnjv Ran Dszol EQUIPMENT - Tracked chassis

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 10108, grinding wheel diameter: 100 mm, grinding length: 100 mm, center width: 100 mm, grinding spindle speed: 18,000 rpm, spindle speed (max.): 250 rpm, TECHNICAL DETAILS Grinding headstock Feed: X1 axes (CNC-controlled) Feed: Z1 axes (CNC-controlled) Dkeb Eh Dnsv Rck Ijzjl Grinding spindle (I) Feed: X2 axes (CNC-controlled) Feed: Z2 axes (CNC-controlled) Grinding spindle (II) Feed: X3 axes (CNC-controlled) Grinding spindle (I + II) Flange: Ø 52 mm Standard collar: Ø 32 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 12 kW Speed control: with frequency converter Max. speed: 18,000 rpm Balancing: electronic Grinding wheel (grinding spindle I + II) Type: Borazon (CBN) ceramic bonded Diameter: Ø 100 mm Bore: Ø 32 mm Grinding wheel coating width: max. 20 mm Circumferential speed: max. 125 m/s Cam piece Workpiece rotation diameter: max. 80 mm Clamping length: max. 100 mm Grinding length: max. 100 mm Workpiece weight: max. 0.5 kg Workpiece spindle Design: fixed with integrated infeed/outfeed movement Stroke: 50 mm Workpiece spindle Dimensions: Ø 210 x 700 mm Flange: Ø 180 mm Standard collar: Ø 127 mm Lubrication: oil lubrication Set air pressure: see chapter 5.3.1 Drive: with servo motor, C1 axis (CNC-controlled) Speed max.: 250 rpm Tailstock Longitudinal adjustment: manual via gear Tailstock quill Live center: mounting hole Ø 20 mm Clamping force: adjustable via pneumatics Dimensions: 50 x 80 x 178 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Grinding stock Design: fixed Steady rest Type: GR - 115 Diameter range: Ø 45 - Ø 60 mm Set air pressure: see chapter 5.3.1 Profiling of the grinding wheel Fine dressing: circumference and face with diamond wheel, mounted on the dressing spindle Circumferential dressing: Ø 110 mm Dressing spindle Dimensions: Ø 80 x 250 mm Flange: Ø 100 mm Standard collar: Ø 75 mm Lubrication: permanent grease lubrication Bearing seal: with sealing air Set air pressure: see chapter 5.3.1 Drive: 5.3 kW Speed control: with frequency converter Max. speed: 30,000 rpm MACHINE DETAILS Installation dimensions: 8,935 x 5,956 x 3,437 mm Weight: 24 t Connection power: 87 kVA

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: A40401385, Year of construction: 2017, operating hours: 28,612 h, load capacity: 12,000 kg, lifting height: 4,930 mm, load center: 600 mm, fuel type: diesel, mast type: standard, construction height: 3,050 mm, TECHNICAL DETAILS Lift height: 4,930 mm Load capacity: 12,000 kg Load center: 600 mm Mast Type: Standard Mast height: 4,070 mm Sideshift: Available Fork positioner: 570 / 2,320 mm Fork carriage width: 2,450 mm Dksb Eh Dnev N I Hfszel Forks: 200 x 70 x 1,800 mm MACHINE DETAILS Total weight: 13,700 kg Engine: Diesel, Cummins Operating hours: 28,612 h Length: 4,660 mm Width: 2,520 mm Forklift height: 3,050 mm EQUIPMENT - Tires 12.00-20 - Standard mast with sideshift and fork positioner - Cabin with Heating Windshield damaged

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, turning length: 350 mm, turning diameter: 340 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 640 mm, controller model: OSP U 100 L, TECHNICAL DETAILS Max. turning length: 350 mm Max. turning diameter: 340 mm Diameter over bed: 530 mm Dkob Eh Dnov Rbthszel Diameter over cross slide: 380 mm Distance between centers: 1,000 mm CNC control: OSP U 100 L Travel paths X-axis: 260 mm Z-axis: 640 mm Spindle and drive Spindle mount: VDI 40 Spindle bore: 62 mm Speed: max. 4,500 rpm Spindle motor power: 22 kW Upper turret: 12 positions, driven Lower turret: fixed tools MACHINE DETAILS Dimensions (L x W x H): 3,970 × 2,100 × 1,932 mm Weight: 4,800 kg

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 00031781-ERH, back gauge travel distance Z-axis: 1,000 mm, sheet thickness steel (max.): 6 mm, table height: 800 mm, cutting width (max.): 2,100 mm, TECHNICAL DETAILS Cutting width: 2,100 mm Max. material thickness: 8 mm Max. sheet thickness (ST42): 6.0 mm Max. sheet thickness (stainless steel): 4.0 mm Cutting angle: 1.2° Stroke rate: 28 strokes/min Cuts per minute: 20 Backgauge adjustment range: 1,000 mm Table height: 800 mm Hydraulic system Oil volume: 150 l Holders Number of holders: 11 Control system Control system: CYBELEC CybTouch MACHINE DETAILS Motor power: 11.0 kW Total weight: 4,500 kg Dob Ehjv N Iv To Dnzokl Length x width x height: 3,010 x 2,100 x 1,670 mm

Condition: ready for operation (used), Year of construction: 1958, Functionality: fully functional, machine/vehicle number: 52/58, ram adjustment: 140 mm, pressing force: 250 t, ram stroke: 190 mm, plate thickness: 24 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 250 t Max. sheet thickness: 24 mm Stroke rate: 30/min Ram stroke: 40 - 190 mm Dob Eev N Iqdsh Dnzjkl Ram adjustment: 140 - 65 mm Further information according to the manufacturer - without guarantee Table: 850 x 800 mm Ram: 600 x 520 mm Dimensions: 1,270 x 2,920 x 3,000 mm

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, TECHNICAL DETAILS Type: Automatic cutting machine Longitudinal tools: 6 real + 6 virtual (multi-line processing) Cross tool: 1 piece Tool change: Automatic set-up Cardboard box infeed: Combi, suitable for single sheet and continuous cardboard box Web widths side by side: Two web widths can be alternated side by side Working height: 900 mm Zero edge: Left/right freely selectable Control panel: Right Workpiece parameters: Web width infeed: 350 - 1,500 mm Web width side by side: Total max. 1,350 mm Stacking height incl. pallet: 2,150 mm Pitch of continuous material: 1,150 mm Web length outfeed: min. 300 mm Cutting tolerance: Lengthwise: max. 0.5 % Transverse direction: max. ±2.0 mm Quality of the cardboard: Cardboard thickness: 2.0 - 7.0 mm (±0.2 mm) Raw material quality: Up to 2.30 BC according to DIN 55468 Processable cardboard qualities 1-wall: Thickness up to approx. 4 mm Processable cardboard qualities 2-wall: Thickness up to approx. 7 mm Cardboard types: FEFCO0403 Standard / FEFCO0410 Standard / FEFCO0429 Lid outside / FEFCO0900 Single MACHINE DETAILS Weight: approx. 2,000 kg Dimensions (WxDxH): approx. 3,450 x 2,400 x 3,700 mm Operating pressure: 6 bar Air consumption: approx. 20 - 100 NL/min (depending on cycle output and carton type) Operating voltage: 400 V, 50 Hz, 3 Ph./N/PE Connected load: 4.5 kW Rated current: 6.5 A Max. Back-up fuse: 16 A EQUIPMENT - Online database with performance indicator per carton design - Degree of perforation: Adjustable - Offset creasing: Available - Multiline processing: Possible - Carton designs: Rotatable (90° grid) - Carton designs: Mirrorable - Quality Plus Mode: Supported - Control: PLC control according to IEC 61131 - Industrial PC: Available - Operating system: Windows 7 32bit professional (US) - Memory: 1 hard disk permanently installed, 1 hard disk USB for data backup, Network: 2 x Ethernet 100 MBit - Interfaces: The machine is prepared for the use of tapio, for communication for digital products. - Free use: tapio MachineBoard app included (unlimited in time) - Software: IntelliCut machine control - Automatic carton production: According to production list (HOMAG CSV format) - Softkeys: For machine functions - Fault diagnosis: Available Dksb Eh Dsv N Htkonzjl - Science program: Included - Display: Control panel with full HD multi-touch display - User interface: Standardized HOMAG user interface - Navigation: Simple, intuitive operation of the machine - Machine data recording MMR basic: For usage-dependent maintenance and display of key production figures (e.g. number of pieces, production time) - Control cabinet integrated in the machine - Machine installed in accordance with European standard EN 60204 - Machines are intended for in-house use

Condition: good (used), Year of construction: 2018, operating hours: 8,752 h, Functionality: fully functional, machine/vehicle number: VDB180076, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 HSCI X-axis: 2,000 mm Y-axis: 1,100 mm Z-axis: 800 mm Table clamping area: 2,200 x 1,000 mm Distance spindle nose to table: 150 - 950 mm Milling spindle Tool holder: SK 50 Spindle speeds: 6,000 rpm Spindle drive: 30 kW Dksb Eh Dnjv N Hrgozsl Feed rate Feed range: 8,000 mm/min Rapid traverse: 15 m/min Tool data Tool changer: 20 Tool weight: 15 kg Tool length: 400 mm Tool diameter: 125 / 250 mm MACHINE DETAILS Total weight: approx. 20 t Dimensions (L x W x H): 5.5 x 5.4 x 3.7 m On-time: 22,813 h Spindle hours: 8,752 h EQUIPMENT - Electrical preparation for 4th and 5th axes - Electronic handwheel - Automatic central lubrication system - Hardened and ground guideways - Fully protective cabin - Internal coolant system with 20 bar - Chip conveyor

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: T32207.0422, Year of construction: 2004, operating hours: 14,908 h, load capacity: 8,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: electric, mast type: standard, construction height: 2,860 mm, TECHNICAL DETAILS Lift height: 4,000 mm Fork carriage width: 2,000 mm Load capacity: 8,000 kg Load center: 600 mm Drivetrain Motor: Electric Voltage: 80 V Capacity: 1,550 Ah Battery year of manufacture: 2015 Mast Type: Standard Sideshift: Available Fork positioner: 425 / 1,960 mm Mast height: 3,150 mm Forks Dimensions: 150 x 65 x 1,400 mm Dksb Eov N I Dwoh Dnzjl MACHINE DETAILS Forklift height: 2,860 mm Length: 4,000 mm Width: 2,050 mm Total weight: 12,174 kg Operating hours: 14,908 h EQUIPMENT - SE 8.25-15 tires - Standard mast with sideshift and fork positioner - Cab with heating

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 121198, turning length: 1,000 mm, turning diameter: 370 mm, spindle speed (max.): 3,800 rpm, bar passage: 62 mm, controller model: OSP-E 100 L, A Fanuc M-710i robot is also included. General overhaul in 2014 TECHNICAL DATA Turning diameter: 370 mm Turning length: 1,000 mm Bar diameter: 62 mm Control unit: OSP-E 100 L Tailstock taper: MT5 C-axis: present Spindle and drive Spindle taper: A2-88 Spindle speed: 3,800 rpm Main motor: 22/15 kW Tool speed: 4,500 rpm Motor for driven tools: 3.7 kW Upper turret: 12 positions, driven Lower turret: fixed tools Fanuc robot Model: M-710i Dsbev Rbpps Eh Dnzjkl Control: R-J2 Year of manufacture: 1997 MACHINE DETAILS Dimensions (L x H x W): 3,900 x 2,050 x 1,950 mm Weight: 6,800 kg Connected load: 30.6 kVA EQUIPMENT - C-axis and two turrets - Various accessories included (see images) - Chuck included Connection cables between the robot and the machine are not included.

Condition: new, Year of construction: 2025, Functionality: fully functional, laser power: 6,000 W, workpiece weight (max.): 950 kg, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 270 mm, TECHNICAL DETAILS X-axis: 3,048 mm Y-axis: 1,524 mm Z-axis: 270 mm Control: CNC-ALPHA T2.0 Laser power: 6 kW Dynamics Max. X-axis speed: 100 m/min Max. Y-axis speed: 100 m/min Positioning accuracy: ± 0.05 mm/m Repeatability: ± 0.05 mm Cutting Cutting gas: Nitrogen Cutting gas: Oxygen Material thickness: Mild steel: 25 mm (depending on cutting gas) Material thickness: Stainless steel: 20 mm (depending on cutting gas) Material thickness: Aluminum: 16 mm (depending on cutting gas) Material thickness: Brass: 12 mm (depending on cutting gas) Cutting table Number of pallets: 2 Number of motors: 1 Djb Ehjv N Hdij Dnzskl Max. Table load: 950 kg MACHINE DETAILS Length: 8,900 mm Width / Depth: 2,260 mm Height: 2,220 mm Max. power consumption: 90 A / 44 kW Total weight: 7,500 kg EQUIPMENT - Welded frame construction made of carbon steel - Aluminum gantry made of an aerospace alloy with a honeycomb structure - Two-stage shuttle table with short table changeover times for high productivity - Table with synchronous motor and frequency drive for high positioning and repeatability - Pull-out drawers in the table for cleaning and disposal of small parts and slag - Modular cutting table with easy module replacement for easy maintenance - Manganese steel plates as table covers to protect the internal table structure - Effective fume extraction from the table through 6 individually controlled dampers - 4 fans in the machine roof ensure a continuous supply of fresh air and, in combination with a Powerful extraction system for a clean cutting chamber - Programmable automatic lubrication of the rack and pinion drive - Servo drive system from ALPHA/WITTENSTEIN or GUDEL - HIWIN/PMI precision linear guides for high precision and motion accuracy - PANASONIC drive motors for high speed and stability - Wireless CNC handwheel for controlling machine functions such as start/stop, calibration, edge detection, marking, and emergency stop - Industry 4.0 through cloud solution and real-time machine monitoring, remote diagnostics, and maintenance - Tricolor machine status display with LED and 360° visibility - Cameras for monitoring the cutting chamber and shuttle table with monitor - Machine with HSG P06 laser cutting head - Water cooler with dual-circulation cooling system and high cooling capacity - Voltage stabilizer for protection against overvoltage and undervoltage - SICK M4000 light barrier for the cutting table - Wear parts set with 2 protective lenses, 10 nozzles, and 1 ceramic ring - Machine complies with CE standards - Machine documentation in German, electronic

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 864, center height: 140 mm, center width: 500 mm, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Digital display: Available Control: Siemens Sicomp IMC 05 Center height: 140 mm Center distance: 500 mm Clamping system Three-jaw chuck: Available Quick-change toolholder: Available Tailstock Type: Available Further information according to manufacturer - without guarantee Center distance: 500 mm Center height: 140 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 150 mm Main spindle Spindle head according to DIN ISO 702-3: Size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Inner taper depth of the main spindle: 50 mm Dsb Eev N Inish Dnzjkl Main drive Drive power (100% duty cycle): 4 kW Speed range: 30 - 4,000 rpm Number of Gears: 1 Number of speeds: continuously variable Feed drive Number of feeds: 24 Feed range longitudinal/transverse: 0.02 - 0.63 mm/rev / 0.006 - 0.2 mm/rev Threading range Metric threads: 0.25 - 8 mm Inch threads: 80 - 2 TPI Tailstock Quill diameter: 40 mm Quill stroke: 85 mm Quill taper mount: MT 3 Machine dimensions Length x width x height: 1,570 x 890 x 1,700 mm Weight: 1,050 kg

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 13676, number of slots in tool magazine: 20, Equipment: chip conveyor, Due to space requirements, the machine is being auctioned without a reserve price - guaranteed sale to the highest bidder! Bidding obligates the buyer to pick up the machine by March 31, 2025! Djb Ehov Ni A Ij Dnzjkl TECHNICAL DETAILS 4th axis: Dividing head mechanically functional, however, the circuit board needs to be replaced Tool changer: 20-station Chip conveyor: Available Filter system: Paper belt filter Operating voltage: 360 - 480 V Further technical data according to the manufacturer - without guarantee X-travel: 1,270 mm Y-travel: 508 mm Z-travel: 635 mm Spindle speed: 8,000 rpm Control: CNC Haas Table length: 1,321 mm Table width: 457 mm Spindle nose to table: 107 - 742 mm Workpiece weight: 793 kg T-slot width: 16 mm T-slot spacing: 80 Number of T-slots: 5 Tool changer: 20 Tool diameter: 89 mm Tool weight: 5.4 kg Spindle taper: CAT 40 Dimensions: 2.8 x 3.0 x 3.2 m Weight: 5.5 t

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 120, TECHNICAL DETAILS CNC control: HEIDENHAIN TNC 426/430 X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Spindle speed range: 20 - 18,000 rpm Spindle drive: 12 / 16 kW Torque: 87 / 130 Nm Work table NC swivel milling head: With B-axis (0.001°) Pallet clamping area: 800 x 630 mm Max. table load: 800 kg Holding torque on the table top: 3,500 Nm Rapid table traverse (round): 13.6 rpm Table feed (round): 3,600°/min Torque: 2,089 Nm Pallet storage: 5-station Djb Ehev N Hmwe Dnzekl Tool magazine Tool holder: SK40 Number of tool positions in the magazine: 120 Max. tool length: 315 mm Tool diameter: 80 / 160 mm Tool weight: 10 kg Feed and rapid traverse Rapid traverse X-Y-Z: 30 m/min Feed range X-Y-Z: 20 - 10,000 mm/min Input resolution: 0.001 mm EQUIPMENT - Electronic hand control panel: included - Measuring probe: included - Tool breakage detection: included - Flushing gun: included - Internal coolant supply: 40 bar - Coolant tank: 900 l - Chip conveyor: included

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 5064045, Year of construction: 2005, operating hours: 17,306 h, load capacity: 11,500 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: standard, construction height: 6,880 mm, TECHNICAL DETAILS Lift height: 10,000 mm Load capacity: 11,500 kg Load center: 1,200 mm Deb Ehjv N Iyrj Dnzokl Mast type: Standard Drivetrain Fuel: Diesel Engine type: Volvo Transmission: ZF Tires Tire type: Pneumatic Tire size: 12.00-20 MACHINE DETAILS Overall length: 5,050 mm Overall height: 6,880 mm Overall width: 3,500 mm Weight: 27.6 t EQUIPMENT - Spreader 20 / 40 - Full cab - Heating

Condition: ready for operation (used), Year of construction: 1980, Functionality: fully functional, machine/vehicle number: 2637, pressing force: 160 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Pressing force: 1,600 kN Motor power: 4 kW Safety distance: 110 mm Overtravel: 13 mm Lubrication system: Available Manufacturer: Eckardt Operation: Two-hand operation Leveling machine Manufacturer: Kohler Type: HVZ3/350 Serial number: 100014 Year of manufacture: 1981 Roller conveyors Number: 2 Dimensions: 300 x 2,000 mm Further information according to the manufacturer - without guarantee Pressure capacity: approx. 160 t Column width: 850 mm Deb Ejv N Ifboh Dnzskl Ram surface: 800 x 700 mm Stroke: 400 mm Ejector stroke: 300 mm Table surface: 800 x 700 mm Dimensions W x D x H: 1,800 x 1,800 x 4,200 mm Weight: approx. 12 t

Condition: refurbished (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 0318, Machine from the insolvency of an automotive supplier - machines are currently still in operation! Retrofit in 2015 TECHNICAL DETAILS Roller conveyor Roller width: approx. 500 mm Length: approx. 7,000 mm Material feed: included Light barrier enclosure: included Saw blade table Diameter: 356 / 406 / 456 / 503 mm Material thickness: 0-25 / 26-50 / 50-75 / 75-100 mm Diameter: 560 / 610 / 660 / 710 mm Material thickness: 100-125 / 125-150 / 150-175 / 175-200 mm Further information according to the manufacturer - without guarantee Cutting window: 600 mm Cutting height: 200 - 355 mm Stop length: 3.6 - 24 m Cutting length range: 12 mm - unlimited Accuracy Position tolerance: ± 0.08 mm Vertical perpendicularity: ± 0.01 mm / mm material thickness Horizontal perpendicularity: ± 0.05 mm / mm Dksb Ehev N Iarj Dnzjl Feed speeds Motor power: 22 kW Slide cutting speed: up to 12,700 mm/min Stop increment speed: up to 12,700 mm/min Stop return speed: up to 20,000 mm/min

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 1096687, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 1,200 mm, table length: 400 mm, Equipment: chip conveyor, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 1,016 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table dimensions: approx. 1,200 x 400 mm EQUIPMENT - Tool changer - Chip conveyor Dob Ehov N Hzzo Dnzekl - Swivel axis - Oil mist extraction Further information according to the manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 794 kg Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.9 x 2.7 x 2.7 m Weight: approx. 5.7 t

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, machine/vehicle number: 172, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! Weight: 1 t Motor power: 6.5 kW Further information according to the manufacturer - without guarantee Front roller spacing continuously adjustable: 200 - 1000 mm Number of driven rollers: 3 Drive type: Electric motors Maximum speed: 22 rpm Roller height: 300 mm Torque: 1,600 Nm Works on both sides: rolling at the front, bending at the rear Dksb Eh Dev Nhimsnzjl Length: 1.6 m Width: 1.3 m Height: 1.4 m Weight: 1.2 t

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 86004811, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Belt filter system Dkob Eov Nhf Ueh Dnzsl Manufacturer: Knoll Type: HF150 Year of manufacture: 1994 Filtration Filter type: Candle filter Discharge conveyor belt Manufacturer: DTW Dimensions: 400 x 2,500 mm MACHINE DETAILS Operating voltage: 380 V, 50 Hz Motor power: 4.68 kW Heating power: 36 kW