Second-hand machinery for sale (2,359)

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN Dujlqeu R N Hyo Dv A Not - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 516368D000, Year of construction: 2013, operating hours: 1,730 h, load capacity: 4,000 kg, lifting height: 6,580 mm, free lift: 2,080 mm, load center: 600 mm, mast type: triplex, HIGHLIGHTS - No reserve price - guaranteed sale at the highest bid! - Valid accident prevention regulations are available - Battery from 2020 with 70% capacity test - Tire condition 90% - 80V-110A charger available =>Forklift ready for immediate use TECHNICAL DETAILS Lift height: 6,580 mm Free lift: 2,080 mm Load capacity: 4,000 kg Mast & Fork Load center: 600 mm Fork length: 1,200 mm Mast type: Triplex Motor Drive: Electric Transmission: Automatic Battery and performance Battery capacity: 930 Ah Battery voltage: 80 V Year of manufacture: 2020 Capacity: 70% Tires Front tire type: SE-White Rear tire type: SE-White Tire condition: 90% MACHINE DETAILS Overall width: 1,399 mm Total height: 3,000 mm Overall height: 3,000 mm Total weight: 7,200 kg Unladen weight: 7,000 kg Color: Orange EQUIPMENT - Sideshifter - Head protection Duslq Dswabddov A Nst - UVV tested until August 2025 - Charger - Operating instructions Transport can be arranged for an additional charge

Condition: excellent (used), Year of construction: 2020, Functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! For milling transom and door profiles made of aluminum and PVC Dslq Dewaa Syev A Nout TECHNICAL DETAILS Milling height: max. 150 mm Milling depth: max. 110 mm Milling length: max. 400 mm Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 1019380401, grinding length: 800 mm, grinding width: 500 mm, grinding height: 425 mm, table load: 1,100 kg, grinding spindle speed: 2,380 rpm, TECHNICAL DETAILS Grinding length: 800 mm Grinding width: 500 mm Grinding height: 425 mm Table load: 1,100 kg Control system: Siemens Sinumerik X-axis – Longitudinal movement of the work table Longitudinal travel: 50 – 850 mm Table speed: 0.001 – 35 m/min Y-axis – Vertical movement Distance from table to spindle center: 180 – 625 mm Vertical speed: 50 – 4,000 mm/min Z-axis – Transverse movement Transverse travel: max. 500 mm Transverse speed: 50 – 4,000 mm/min Grinding spindle Grinding spindle motor power: 11 kW Grinding spindle speed: 800 – 2,380 rpm Dolq Dvowaa Alj A Njut Grinding wheel dimensions: 400 x 100 x 127 mm MACHINE DETAILS Machine dimensions: 4,200 x 2,200 x 260 mm Machine weight: 4.2 t

Condition: ready for operation (used), Year of construction: 2010, operating hours: 28,635 h, Functionality: fully functional, machine/vehicle number: 251-78, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 48, TECHNICAL DATA Control: Heidenhain Travel X / Y / Z: 550 / 400 / 400 mm Spindle and axes Spindle speed: max. 15,000 rpm Tool holder: HSK 50 Tool magazine: 48-station Table: Swivel table MACHINE DETAILS On-time: 51,192 h Spindle runtime: 28,635 h Control: On-time: 49,427 h Weight: 6,500 kg Electrical specifications Operating voltage: 400 V Control voltage: 230/24 V Power: max. 41 kVA Rated current: 59 A Dslq Dv Ajwaai So Njut Fuse protection: 63 A Frequency: 50/60 Hz EQUIPMENT - Handte oil mist extraction system - Tool package - Heidenhain 3D measuring probe - Workpiece measurement IR probe - Turntable - Documentation - Data backup

Condition: used, Year of construction: 2008, GF Agie Charmilles Mikron UCP 600 Vario 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. TBC (2008), 10 Pallet Changer System, 30 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Djlqewaaf To Dv A Nsut

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request Delqeu Egags Dv A Njut - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,438 h, Functionality: fully functional, TECHNICAL DETAILS Max. build volume: 356 x 305 x 305 mm Material type used: ASA Material types according to manufacturer: ABS-M30, ABS-M30i, ABS-ESD7, ASA, FDM Nylon 12, FDM Nylon 12cf, PC-ABS, PC, SR20, SR30, SR35, SR100, SR110, PC-BASS Accuracy: ± 0.127 mm or ± 0.0015 mm (depending on material) MACHINE DETAILS Network LAN connection: required for communication and file transfer Interface: 100 Base-T, Ethernet protocol, RJ45 Dolqov U Uw Is Dv A Neut IP configuration: DHCP or static EQUIPMENT - 3x400 V to 3x230 V transformer included

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 516221J01386, Year of construction: 2018, operating hours: 465 h, load capacity: 1,600 kg, lifting height: 5,800 mm, load center: 500 mm, fuel type: electric, mast type: triplex, Equipment: UVV, TECHNICAL DETAILS Drive: Electric Battery voltage: 48 V UVV approved until: 03/2026 Duelev U T Thoq Dv A Njt Performance data Power: 13 kW Load capacity: 1,600 kg Load center: 500 mm Tire condition: 90% Mast & Fork Mast type: Triplex Lift height: 5,800 mm Fork length: 1,200 mm MACHINE DETAILS Total weight: 2,548 kg EQUIPMENT - Pallet forks - Sideshifter - Head protection - Lighting - Work lights front & rear - Windshield with wiper - Joystick 4plus - Single-pedal control - Charger

Condition: ready for operation (used), Year of construction: 2004, operating hours: 3,569 h, Functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 810D powerline, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS X-travel: 1,040 mm Y-travel: 600 mm Z-travel: 500 mm Control: Siemens Sinumerik 810D powerline Dslq Dvjwaat Rj A Nsut Feed Feed rate: 1 – 40,000 mm/min Rapid traverse: X-axis: 70 m/min, Y/Z-axis: 40 m/min Spindle Speed range: continuously variable up to 12,000 rpm Spindle mount: SK 40 / DIN 69871 A Tool and table Tool turret: 30 positions Table clamping area: 1,250 x 600 mm Max. table load: 800 kg MACHINE DETAILS Machine dimensions: 3,600 x 2,800 x 3,200 mm Machine weight: approx. 8.0 t Machine hours ON: 80,391 h Machine hours spindle: 35,695 h EQUIPMENT - 3D measuring probe - Internal cooling system - Chip conveyor - Tool measurement Transport available upon request

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: Clear float glass Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table Duolq Dev U Rh Asv A Not - Heating section - Coating section - Cooling section - Unloading table

Condition: used, Year of construction: 2015, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.587 (2015), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Duslq Dvewaafae A Nst Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1101834, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table width: 900 mm, table length: 400 mm, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table dimensions: approx. 900 x 400 mm Tool changer: 24-station Further information according to the manufacturer - without guarantee Spindle speed: 12,000 rpm Tool taper: CT 40 Table load: max. 680 kg Duelov U Nwveq Dv A Njt Tool diameter: 76 mm Tool slots: 24+1 Machine dimensions: approx. 3.2 x 2.8 x 2.7 m Weight: approx. 3.7 t

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Dolq Dv Ajv Rxaxj Neut

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Delq Dv Aev U Da Se Neut Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Duolq Dvov U Rals A Not Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: used, Year of construction: 2016, GF Agie Charmilles Mikron HPM-450U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.37.00.619 (2016), 10 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe, Cleanmist CM800 Filtration Unit Dujlqjwaabus Dv A Not

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140653, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 EQUIPMENT Tool changer Chip conveyor Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Dueljv U Nn Uoq Dv A Njt Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Delq Dv Aov Rw Nlo Njut

Condition: used, Year of construction: 2017, GF Agie Charmilles Mikron Mill E 500U 5-Axis Multi-Pallet Machining Centre with Heidenhain iTNC-530 Control. Serial No. 107.125.00.0011 (2017), 7 Pallet Changer System, 60 Position ATC, High Pressure Through-Spindle Coolant, HSK-63 Spindle Taper, Steptec 20,000rpm Spindle, Renishaw OMP Touch Probe Dolewaaa Djq Dv A Nsut Location: This lot is located in High Wycombe, Bucks, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Djlq Dsv U Nm Dsv A Nsut Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: good (used), last calibration Aug 2024 Duelq Dv Ajv Rw Eyj Nst

Condition: used, Year of construction: 2001, Tortellinatrice Mario Agnelli Type 500.540 Ravioli/Cappelletti Maker. S/No. 915.0 226 (2001) Djlq Dv Ajv U U Tvo Neut Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Dolq Dsv Rwz Iov A Nout

Condition: used, Mezzanine with Horizontal Screw Distribution Line and Automated Dough Shutters. IMI Mixer. S/No. 094040 Associated Hoppers and Pumps, Inspection Walkways Access Ladder and Control Panels. Duolq Dvsv U U E Sj A Not Please Note: These lots are located in Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.