Second-hand machinery for sale (2,404)

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Components: - DBM 5000 Booklet Stitcher - DBM-LST Long Edge Trimmer - DSF-2000 Feeder - DBM 5000T Front Trimmer Production Speed: up to 5,000 sets/h Stapling and Folding Area Saddle Stitching - Length: 170 to 500 mm Saddle Stitching - Width: 120 to 356 mm Side/Corner Stitching Formats: B5 LEF, A4 SEF / LEF, B4 SEF (partially limited) Number of Staples: 0 to 2 Stapling Thickness: up to 5 mm Wire Gauge: No. 25 to 27 Folding Capacity: up to 25 sheets Paper Handling Paper Weight - Plain Paper: 64 to 127.9 g/m² Paper Weight - Fine Art/Coated Paper: 84.9 to 157 g/m² Debswbrcasu Sa R Ujcg Paper weight – Cover: up to 300 g/m² MACHINE DETAILS Suitable for: Digital and offset printing Piece count: 9,020,711 pieces Dimensions & Weight Dimensions (with belt delivery): 2,230 × 865 × 1,300 mm Weight: 412 kg Power supply Voltage: 120 to 240 V Frequency: 50/60 Hz Current consumption: 6.5 - 3.8 A FEATURES - LCD touch panel for control - 12 storable jobs - Front trimmer can be bypassed if necessary - Set-by-set and sheet-by-sheet feeding possible

Condition: new, Year of construction: 2024, Functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Debu Sa Rjwbqmds Ujcg Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404605 + 2404606, A double package of two new robots will be auctioned! The robot will be delivered free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380 Dsbu Sa Rewbqlmo Uecg

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, TECHNICAL DETAILS Production mode: Roll to roll Available outputs: Roll to roll, roll to fold Available printing inserts: 4 × 24" (12") Available perforation cylinders: 24" (12") Perforating station: Available Web guide and web control BST web guiding system: Available BST web inspection camera: Available Dsbjwbqadeu Sa R Uscg Production expansions Double production: Possible Turner bars: Available Additional equipment Numbering: Available Technotrans rewind and cooling units: Available Remote control of the inking units: Available IST UV dryers: Available Cutting units: Available Rewind units: Available EQUIPMENT BST Web Guide BST inspection camera Technotrans cooling system IST UV dryer Perforation unit Turning bars Numbering unit Remote ink control system Cutting unit Rewinder Roll-to-fold output

Condition: not inspected (used), Unreserved Online Auction of the Battery Production Machinery of Xerotech Ltd (In Liquidation) Wilsons Auctions Dublin has received instructions from Luke Charleton and Alan Large the Joint Liquidators of Xerotech Limited (In Liquidation) to Sell by Unreserved Public Auction Specific Assets of the Company Auction Starts: Wednesday 23rd April, 10am Auction Ends: Thursday 24th April, 10am Featuring: Sinexcel BTS-1500V600kW Battery Power Testing System (600kW Load banks) Dsbjwbkgweu Sa R Ujcg All lots are Located at the Xerotech Limited (In Liquidation) Manufacturing Premises Units 6-8 & Unit 23, Claregalway Corporate Park, Co. Galway, H91A9RT, Ireland.

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 202103240, working width: 320 mm, tank capacity: 200 l, TECHNICAL DETAILS Capacity: 200 l Outer diameter: 1,200 mm Height: 905 mm Inner bowl dimensions: 320 mm Dcobuowbhmno Sa R Ujg Power Heating efficiency: 1.5 × 6 Motor power: 1.5 kW MACHINE DETAILS Weight: 550 kg Voltage: 400 V / 3 PH Operating temperature: 3 - 40 °C

Condition: used, Year of construction: 2023, Plant No. 251-000410, consisting of a trough vibrator, type CB1200, a vibration dryer, type G1000, a peeler centrifuge, type ZA 06, a lifting and tilting device on the outlet side, a lifting and tilting device on the inlet side, a wastewater treatment plant, and a central control cabinet Djbu Saev Tyu Ne R Uecg

Condition: used, Year of construction: 2021, operating hours: 19,074 h, machine/vehicle number: 2001406, Consisting of: Granule dosing system, gravimetric batch dosing system with integrated feeding system, 1 monitoring system, 4 single-screw extruders PERFORM-EX, year of construction: 2021, 1x diameter Ø: approx. 120 mm, L/D 30 (C), max. capacity: approx. 650 kg/h, 1x diameter Ø: approx. 80 mm L/D 34 (B), max. capacity: approx. 400 kg/h, 2x diameter Ø: approx. 55 mm L/D 34 (A-D), max. capacity: approx. 150 kg/h, each with infrared heating resistors and AC motors, pressure and temperature transducers, manual hydraulic screen changers, 1 extruder support structure, 1 feed block, 1 flat extrusion head CLOEREN/USA REFLEX, 1 two-chamber vacuum box, 1 Cast chill roll unit, year of manufacture: 2021, cylinder diameter Ø: approx. 1,400 mm, trigger roll Ø: approx. 300 mm with AC motorization, rotary couplings and rubber cleaning roll, 2 BIGMOUTH edge trim suction devices, with mill and transport device for re-feeding at the extruder Ø: approx. 120 mm, 1 IR-NDC thickness gauge with video, product coding and self-diagnosis unit, 2 3-axis automatic winders ALLSPEDY IV-SIMM/ALLSPEEDY IV, year of manufacture: 2020, serial no.: 190260612/190260613, 1 lateral sliding device, 1 pulling section, year of manufacture: 2021, serial no.: 1902606.11, 1 central line control station with HMI, max. Usable film width: approx. 6 x 500 mm, min. and max. film thickness: approx. 8-35 µg, total gross capacity: approx. 1,350 kg/h, with automated film packaging and conveying unit with vacuum lifter, machine protective housing Debev Tv H Isu Sa R Ujcg

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404603, load capacity: 220 kg, arm reach: 2,701 mm, The robot will be provided free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Dcsbu Saewbqgwo R Usg Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 773, paper width (max.): 260 mm, 8-Color Semi-Rotary UV Offset Djbuewbhtbe Sa R Uscg TECHNICAL DETAILS Printing process: Semi-rotary waterless offset for labels, PVC, and films Inking units: 8 (with UV) Print type: 4+4 UV offset Print width: max. 260 mm Print format: max. 250 mm Speed: 50–180 Material flow Material feed: Roll to roll Unwind unit: included Rewind unit: included EQUIPMENT - Unwind unit - Rewind unit - UV drying

Year of construction: 2023, Condition: not inspected (used), Unreserved Online Auction of the Battery Production Machinery of Xerotech Ltd (In Liquidation) Dcsbewbkgdsu Sa R Uog Wilsons Auctions Dublin has received instructions from Luke Charleton and Alan Large the Joint Liquidators of Xerotech Limited (In Liquidation) to Sell by Unreserved Public Auction Specific Assets of the Company Auction Starts: Wednesday 23rd April, 10am Auction Ends: Thursday 24th April, 10am Featuring: 2023 Neware CT-8032-5V30A-NTA Battery Testing System All lots are Located at the Xerotech Limited (In Liquidation) Manufacturing Premises Units 6-8 & Unit 23, Claregalway Corporate Park, Co. Galway, H91A9RT, Ireland.

Year of construction: 2023, Condition: used, Serial No. 1468, consisting of a container tilting device, safety light barrier, 2 steep conveyors, each with a cleated conveyor belt, working width approx. 200 mm, machining cell, 2 separation stations, 4 thread formers M8x1.25, control system, PC system Dcjbu Sev Tydqja R Usg

Condition: used, Year of construction: 2020, operating hours: 20,308 h, machine/vehicle number: 1902606, Consisting of: Granule dosing system, gravimetric batch dosing system with integrated feeding system, 1 monitoring system, 7 single-screw extruders PERFORM-EX, year of construction: 2020, 2x diameter Ø: approx. 120 mm, L/D 30 (C-E), max. capacity: approx. 650 kg/h, 1x diameter Ø: approx. 80 mm L/D 34 (D), max. capacity: approx. 400 kg/h, 4x diameter Ø: approx. 65 mm L/D 34 (A-B-F-G), max. capacity: approx. 200 kg/h, each with infrared heating resistors and AC motors, pressure and temperature transducers, manual hydraulic screen changers, 1 extruder support structure, 1 feed block, 1 flat extrusion head CLOEREN/USA REFLEX, 1 Two-chamber vacuum box, 1 Cast chill roll unit, year of manufacture: 2020, cylinder diameter Ø: approx. 1,400 mm, trigger roll Ø: approx. 300 mm with AC motorization, rotary couplings and rubber cleaning roll, 2 BIGMOUTH edge trim suction devices, with mill and transport device for refeeding at the extruder Ø: approx. 120 mm, 1 IR-NDC thickness gauge with video, product coding and self-diagnosis unit, 2 3-axis automatic winders ALLSPEDY IV-SIMM/ALLSPEEDY IV, year of manufacture: 2020, serial no.: 190260612/190260613, 1 lateral sliding device, 1 pulling section, year of manufacture: 2020, serial no.: 1902606.11, 1 central Line control station with HMI, max. usable film width: approx. 6 x 500 mm, min. and max. film thickness: approx. 8-35 µg, total gross capacity: approx. 2,500 kg/h, 1 automated film wrapping and handling unit, consisting of: 1 pallet wrapping unit ITALIAN ROBOT Ambrogio, year of manufacture: 2021, serial no. 884, vacuum conveyor unit, 1 machine protective enclosure Dcobu Sa Rsv Tv Hze Ueg

Year of construction: 2023, Condition: not inspected (used), Unreserved Online Auction of the Battery Production Machinery of Xerotech Ltd (In Liquidation) Wilsons Auctions Dublin has received instructions from Luke Charleton and Alan Large the Joint Liquidators of Xerotech Limited (In Liquidation) to Sell by Unreserved Public Auction Specific Assets of the Company Auction Starts: Wednesday 23rd April, 10am Auction Ends: Thursday 24th April, 10am Featuring: 2023 Neware CTE-4040-5V30A Battery Testing System Integrated with Neware Auxiliary Cylindrical Battery Test Racks All lots are Located at the Xerotech Limited (In Liquidation) Manufacturing Premises Units 6-8 & Unit 23, Claregalway Corporate Park, Co. Galway, H91A9RT, Ireland. 2023 Neware CTE-4040-5V30A Battery Testing System Integrated with Neware Auxiliary Cylindrical Battery Test Racks Djbuswbkfgs Sa R Uocg

Condition: good (used), Year of construction: 2021, Make: SPINNER, Type: TC600 65SMCY, Year of manufacture: 2021, Serial no. AT1207, max. swing Ø 600 mm, max. turning Ø 400 mm, max. turning length 650 mm, travel x/y/z = 275 / Y +50/-40/ 700 mm, max. rapid traverse x/y/z = 15/15/2 m/min, turning spindle 1: max. speed 4,000 rpm, spindle nose A8/DIN, chuck 250 mm, spindle power 21/27 kW, torque 201/258 Nm, turning spindle 2: max. speed 6,000 rpm, spindle nose Ø 110 mm, chuck 165 mm, spindle power 20/12 kW, torque 64/76 Nm, tailstock: taper mount MK4, quill Ø NC-Body, stroke 570 mm, tool turret (driven Tools) 16x VDI30/BMT45; 12x VDI40, counter spindle, Siemens control system, type 840DE, Spinner touch panel, Shopturn handheld unit, measuring probe for tool measurement, Spinner workpiece automation, type Robobox, consisting of a workpiece pallet, 5 drawers, dimensions WxHxD = 800x600x200 mm each, Fanuc loading/unloading robot, type M-10ID12, load capacity 12 kg, reach 1,420 mm +++ Attention: Machine is part of an online auction! +++ Dcebujv Txq Ns Sa R Ujg

Condition: used, Year of construction: 2003, Output after conversion: approx. 10,000 /h (rated output) Year of manufacture: 2003 Condition: completely overhauled (2021) Equipment: - 2 rotary feeders - 1 catalog feeder - 2 friction feeders - 1 envelope feeder - 1 belt stacker - 1 pressure/vacuum pump - New machine control system with various expansion options. Already equipped for controlling an online channel, as well as a reading device for selective insert removal and matching at two insert stations and the online channel, as well as a modem and connection option for remote maintenance. 1 ONLINE CHANNEL Manufacturer: MAILING SYSTEM Name: Transaction Module MS Series C5 Performance: 30,000 single sheets / hour Condition: New Features: - Single sheet feeder: Collect up to 15 sheets and transfer them as a stack of inserts horizontally into the inserter's insert conveyor. - 2-pocket fold: Collect up to 5 sheets into a bundle and fold them. Any number of folded bundles can be created and then transferred as a stack to the inserter's insert conveyor. - The cover letters are inserted and processed with the print side up (processing from back to front). This eliminates the need to turn the cover letters! - Scanner for insert matching and selective feed (Cognex Scanner Dataman) - Mechanical and electronic connection to the inserter (basic); 2 scanners for enclosure matching and selective scanning Manufacturer: COGNEX Name: Dataman 100/200 Condition: New Features: - Adjustable lens in 3 positions - Integrated lighting and LED positioning aid - Teach-in and trigger buttons for easy setup Functionality: - The scanners are installed in the inserting machine and connected to the PLC - Subsequent changes and adjustments to the program are possible at any time via remote maintenance, provided an internet connection and access possible - Additional options, such as postcode changes and bundle changes, can be programmed as required, but must be integrated as characters in the code on the computer system Technical specifications: 1. Data Matrix Code Reader ECC200 - Automatic or selectable reading of dark codes on light backgrounds and vice versa - Square code sizes 10x10 to 48x48 - Rectangular codes up to 16x48 - Rotation-independent code reading in the 60–120 degree angle range - Movement speed up to 5 m/s - All common formats including DPAG Data Matrix Dcobu Sa Rsv Tv Hno Ujg - Unlimited data capacity - Fully automatic adjustment to print quality 2. Barcode reading - All common barcodes, e.g.: Code Interleaved 2 of 5, Code 39/32, 128 A, B, C - Micro PDF 417, EAN12, EAN8, Pharmacode - Adjustable length specifications

Year of construction: 2023, Condition: not inspected (used), Functionality: unexamined, Unreserved Online Auction of the Battery Production Machinery of Xerotech Ltd (In Liquidation) Wilsons Auctions Dublin has received instructions from Luke Charleton and Alan Large the Joint Liquidators of Xerotech Limited (In Liquidation) to Sell by Unreserved Public Auction Specific Assets of the Company Auction Starts: Wednesday 23rd April, 10am Auction Ends: Thursday 24th April, 10am Dcsbuewbkdpj Sa R Ueg Featuring: 2023 SiTwestFEK Ultrasonic M17XL Wirebonder WB 1 (Serial#61-x-600513 All lots are Located at the Xerotech Limited (In Liquidation) Manufacturing Premises Units 6-8 & Unit 23, Claregalway Corporate Park, Co. Galway, H91A9RT, Ireland.

Condition: used, Year of construction: 2022, machine/vehicle number: 73633, FL2-50 Flat Stack Machine FA50 / 4-Station Folder, 1 Station SM 50 / 2 Creasing and Cutting Machine Djbov Tv Huou Sa R Uecg S-350 / 2 Stream Delivery (For details, see offer no. 138562)

Condition: not inspected (used), Year of construction: 2024, Functionality: unexamined, Unreserved Online Auction of the Battery Production Machinery of Xerotech Ltd (In Liquidation) Wilsons Auctions Dublin has received instructions from Luke Charleton and Alan Large the Joint Liquidators of Xerotech Limited (In Liquidation) to Sell by Unreserved Public Auction Specific Assets of the Company Dcsbu Sewbkclja R Ueg Auction Starts: Wednesday 23rd April, 10am Auction Ends: Thursday 24th April, 10am All lots are Located at the Xerotech Limited (In Liquidation) Manufacturing Premises Units 6-8 & Unit 23, Claregalway Corporate Park, Co. Galway, H91A9RT, Ireland. Featuring: 2 x 2024 Transtherm TD80W/HA-135/GL11 Horizontal Air Blast Chillers.

Condition: used, Year of construction: 2017, operating hours: 49,902 h, machine/vehicle number: 2080451, Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 work spindles 1-17,500 rpm, torque motor drive system, equipment includes: Oil distributor for rotary table, pneumatic pressure booster, total magazine extension 144 tool positions (2 x 72), basic hydraulic clamping module, 70 bar high-pressure pump, emulsion mist separation system, automatic loading door, air monitoring, inductive tool breakage monitoring, KNOLL 800 K-1/400 scraper belt conveyor, KNOLL FKA 1200 compact belt filter for cleaning cooling lubricant and much more. Dcjbov Tv Ekou Sa R Usg

Condition: used, Year of construction: 2020, operating hours: 36,455 h, machine/vehicle number: 302446, Basic machine: cleaning, rinsing1, rinsing2, downstream: hot-air drying (air-cooled vapor condenser), vacuum drying (continuous vacuum dryer), cooling tunnel, main flow filtration, zone cleaning, pump-out device, gravity oil separator, detergent re-dosing, and much more. Dcsbov Tv Eqeu Sa R Ueg

Condition: used, Year of construction: 2021, machine/vehicle number: 306.11.006.21, 3 vacuum pumps BECKER VTLF2-250/0-79, year of manufacture: 2021, control panel, approx. 7 tools Dcsbuov Tv Hbe Sa R Uog

Year of construction: 2020, Condition: used, machine/vehicle number: 334-117, GA No.: 91, internal number 63 or P.41, clamping force: 7,500 kN, max. hydraulic clamping pressure: 246 bar, screw diameter: 80 mm, max. hydraulic injection pressure: 235 bar, theoretical shot volume 2,010 cm³, mold installation height 400-1,100 mm, tie bar clearance: 1,140 x 1,450 mm, centering diameter: 200 mm, machine weight: 30,500 kg, damages: toggle lever not fully functional, partially already replaced, new toggle lever set from Italy not 100% compatible, max. clamping force currently approx. 550 kN, height adjustment occasionally jams due to the weak drive power of the motor, hydraulics partially leaking (Attention: Disassembly and loading will be carried out by a specialist company. By bidding on this item, the bidder accepts the additional Disassembly and loading costs amount to €9,800.00. This additional service will be invoiced separately. The machine will only be released for collection upon payment of both invoices. The collection date will be communicated separately. Dcjbuev Tv H Us Sa R Ueg

Condition: used, Year of construction: 2019, machine/vehicle number: 18293, GA No.: 349, Weight: 3,000 kg, consisting of: Pin loading station with GERUTEC GBB-50 belt hopper, vibratory conveyor with linear conveyor, video surveillance system for pin quality with 3 cameras and monitor, ejection unit for bad pins, 2 ABB IRB 910SC assembly robots, loading station with 4-station turntable with 2 parts stations each, unloading station with vacuum suction lifter and belt conveyor, protective enclosure, dimensions (W x H x D): approx. 300 x 220 x 400 cm, switch and control cabinet (Please note: Disassembly and loading will be carried out by a specialist company. By bidding on this item, the bidder accepts the additional disassembly and loading costs of €5,900.00. This additional service will be invoiced separately. The machine will only be released for pickup upon payment of both invoices. The pickup date will be communicated separately.) Dcjbu Sev Tv Ifsa R Usg

Year of construction: 2017, Condition: used, machine/vehicle number: 12652, GA No.: 592, Net weight: 14,300 kg, Travel distances (x/y/z): 2,000/1,000/800 mm, Control terminal, Control cabinet, Fire extinguishing system, Recooling system RITTAL Mini 0045TV02S273AB (Please note: Disassembly and loading will be carried out by a specialist company. By bidding on this item, the bidder accepts the additional disassembly and loading costs of €13,300.00. This additional service will be invoiced separately. The machine will only be released for collection upon payment of both invoices. The collection date will be communicated separately.) Dcsbev Tv Ilsu Sa R Uog