Atlas Copco SF8 + FF Oil Free Air Compre

Atlas Copco SF8 + FF HC

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Gsdpfxoxdc Uvo Acwjbk

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Gbedpfxju Rptye Acwsk Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate Godpfx Acefc T Tqswjbk -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Travel Y 510 mm Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Gbedpfx Acewud Afswjk Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

Year of construction: 1988, condition: good (used), A complete Atlas Copco air compressor including Donaldson Ultra Filter and a Tank in good working condition Gbodpfxjhpx U Ae Acwjk

Condition: good (used), Year of construction: 2020, operating hours: 1,730 h, functionality: fully functional, overall weight: 580 kg, total length: 1,335 mm, total width: 750 mm, total height: 1,880 mm, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 66 dB, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Type: Aircenter SK22 Year of Manufacture: 2020 Condition: Very good, used Run-on hours: 6,000 h Load hours: 1,730 h Maintenance in 2,589 h Technical Specifications Pressure 11 bar Effective free air delivery 1.67 m³/min Rated motor power 11 kW Motor protection class IP 55 Power supply 400 V / 3 Ph / 50 Hz Dimensions (W x D x H) 750 x 1,335 x 1,880 mm Weight 580 kg Air receiver 350 l Compressed air connection G 1 Sound pressure level 66 dB(A) Gjdpfsxnnd Dsx Acwsbk Refrigeration dryer Power consumption 0.49 kW Pressure dew point 3 °C Pressure drop 0.06 bar Refrigerant R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment: EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m power cable with 32A plug

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Gsdpfovxlq Hex Acwjbk Used, excellent condition, little used Make Altendorf Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Engine speed: 2,945 1/min Gbsdpst Iwyuefx Acwok Condition: used (see pictures and type plate)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 4012M-4212, measuring range X-axis: 900 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 1,200 kg, Equipment: type plate available, Technical Data: Machine type: Mitutoyo STRATO 9106 FAL-A910 Year of manufacture: 2001 Measuring range: 900 x 1000 x 600 mm Software: Mitutoyo Software v2.4.R11 Accessories: Gbsdpfx Asqz T H Aecwek Probe head mount: Renishaw SP80 Probe head: Renishaw SP80 Additional accessories: calibration ball (ceramic), various probe styli and extensions, Renishaw change rack, fastening kit with 4 x SCP80 and probe holder Modifications and errors in the technical data and information as well as prior sale are subject to change!

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Gbedpowt Swzsfx Acwek