GA90 screw compressor

Atlas Copco GA90

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Noise Level Drive Type Gbsdpfxexx Snbs Agbjg Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, working width: 1,100 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, total length: 2,210 mm, total width: 1,530 mm, total height: 1,940 mm, overall weight: 1,200 kg, input voltage: 400 V, workpiece height (max.): 50 mm, power: 6 kW (8.16 HP), input current: 18 A, Edge rounding up to 1100mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel or aluminum parts that have been cut in either a laser, shearing or punching machine. This machine processes parts of various dimensions, including products as small as 50x50mm. The DM1100 C has a station with double cross belts for edge rounding and leaves clean, smooth and burr-free edges on the complete parts. DM1100 C Working capacity (mm) 1100x50 No. of cross belt stations 1 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Cross conveyor motor (kW) (2x) 3 Feed motor (kW) 0.18 Total power (kW) 6 Godpfx Agotzfntebsbg Power consumption (A) 18 Rod suction connection per head (Ø mm) 150 Dimensions (mm) 2213x1530x1940 Weight (kg) 1200

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric Gsdsxl Hxbepfx Agbjbg voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: good (used), Year of construction: 2000, Screw compressor Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Gbsdpfx Aevi E Uysgbog Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Conical bending device Separate control panel Useful length : 1270 mm Top roller diameter : 130 mm Side rolls diameter : 130 mm Motors total power : 3,3 KW Gedpfx Ajiffwqogbjbg Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Gbodpfxsxn Sw Ij Agbeg Power: 90 kW - 110 HP Capacity: 16,200 liters/min

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Gbedpfx Aexnz Najgbog Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use.

Condition: new, filling capacity 300 kg Godpfju Uu T Rsx Agbobg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 625 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg range L-W-H 1 x 1,7 x 1,29 mm New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2017, operating hours: 28,625 h, functionality: fully functional, Premium screw compressor Atlas Copco GA90+. 90 kW, 8.5 bar with 16.50 m3/min. Only 28,625 operating hours. With heat recovery, new compressor oil and new oil filters. Gsdpfx Asuqanaogbsbg

Condition: excellent (used), Year of construction: 2006, Atlas Copco GA 90 FF With integrated refrigerant dryer. Refrigerant R 404a. Gsdpfxsrk Nuys Agbsbg

Condition: good (used), Year of construction: 2002, cutting diameter 320 mm saw band length 4160 mm cutting width 610 mm cutting lenght max. 500 mm clamping head: max. 620 mm saw speed stufenlos 15-120 m/min work height max. 760 mm dimensions of saw-band 4160 x 34 x 1,1 mm Control Siemens Siematic OP3 total power requirement 2,6 kW weight of the machine ca. 1,96 t dimensions of the machine ca. 2,55 x 2,45 x 1,5 m Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week! Estimated operating hours = 3400. Cutting range 0° / 90° Gbjdpfx Aov Htimegbjg - round 320 mm - FLAT 610 x 320 mm !!!! Cutting range 75° - round 320 mm - flat 350 x 200 mm Cutting range 60° - round 300 mm - flat 300 x 200 mm Cutting range 45° - round 260 mm - flat 250 x 180 mm Cutting range 30° - round 160 mm - flat 150 x 150 mm Please notice: Price of this machine new: €28000 Machine dealer with own stock of 1600 m².

Condition: like new (used), Year of construction: 2012, operating hours: 11,118 h, functionality: fully functional, Premium second-hand Atlas Copco GA90 Godpfx Agjt E I D Eebobg 7.5 bar 16.21 m3/min Only 11,118 operating hours

Condition: excellent (used), functionality: fully functional, We currently have over 15 Atlas Copco GA90 units in stock in various configurations. Frequency-controlled. With integrated dryer. Gsdoxctxiopfx Agbsbg

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. Godpfx Aoh I N Udogbebg * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: excellent (used), Year of construction: 2014, operating hours: 25,283 h, functionality: fully functional, Screw compressor Atlas Copco GA90FF. 90 kW with 8.25 bar and 16.48 m3/min. Integrated dryer. Gsdpexctmyofx Agbebg