Screw compressor GA18VSD+

Atlas Copco GA18VSD+

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor Fjdpfehabk Dex Afnspb -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Fedpfxewikate Afnjpb Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Fpodpfsu Rptyox Afnjb Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11,2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Standard accessories included. Fsdpfxshf Na Sj Afnspb

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag Fodpfxow Ivk Te Afnjpb - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: used, Year of construction: 2016, Air compressor including compressed air dryer and oil trap with oil-water-separator. air compressor: - volume rate of flow: 8,02 m3/min - stage pressures: 13 bar g - suction pressure: 1 bar - installed motor capacity: 45 kW Additional title: compressed air supply Capacity: 8 m³/min Stage pressure: 13 bar Suction pressure: 1 bar Drive: 4250 rpm Fjdpjxbppbjfx Afnopb Power: 45 kW Current: 97 A Voltage: 400 V Frequency: 50 Hz Length: 1,80 m Width: 0,92 m Height: 1,80 m

Condition: good (used), machine/vehicle number: 3176, Year of construction: 2020, load capacity: 16,000 kg, lifting height: 3,970 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 5,500 mm, total width: 2,550 mm, operation weight: 23,360 kg, additional equipment features: Dual tread, Front mud guards, Warning triangle, Centralized greasing system, Hyster Tracker, Hydraulic sliding cabin, Equipment: lighting, Hyster H16.00XD-12 from Uniktruck Fodpeul D Adefx Afnopb

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,190 h, load capacity: 5,000 kg, lifting height: 4,140 mm, free lift: 1,310 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, fork carriage width: 1,310 mm, fork length: 2,400 mm, empty load weight: 8,140 kg, total length: 3,350 mm, drive type: Diesel, construction width: 1,410 mm, Diesel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires Type: Superelastic Fpedpfxju Dzqwj Afneb Rear tires size: 28x9-15 Description: In addition to this Hyster model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this H5.0FT P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, full free lift,

Condition: used, Year of construction: 1987, Granule dryer, compressed air dryer, granulate drying plant, adsorption dryer -Manufacturer: Zander, adsorption dryer type K1300MS -Operating pressure: 7 bar, max. 16 bar Fpsdpstpyqxsfx Afnob -Container capacity: 200 litres each -Individual components: see photos -Transport dimensions: 1250/750/H1960 mm -Weight: 684 kg