Screw compressor

Atlas Copco G15FF

Condition: like new (used), Year of construction: 2021, Model G15 FF Main motor power: 15.0 kW Tank capacity: 500 L Built-in dryer Electronic control of compressor operating parameters Kwsdpfow Ev Eysx Ah Not Weight: 340 kg Year of manufacture: 2021 Complies with CE standards

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock! Kjdpsdrc Txofx Ah Nswt

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank Kwjdpfx Aeq E Irajh Not • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein YXLON X-ray system Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Kjdpovz Aprsfx Ah Njwt Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Condition: new, Year of construction: 2024, The SCHORR electric dumper is ideal for transporting heavy loads and bulk materials. With a load capacity of 500 kg, this wheelbarrow with electric motor is a real powerhouse that can also handle larger loads effortlessly and, above all, quietly. Thanks to the hydraulic tipping skip with a large tipping radius, you can unload your load easily, quickly and completely. Our electric dumper is powered by a brushless 48V electric motor with an output of 1000 watts. This motor is not only particularly powerful, but also extremely durable and low-maintenance. The motor is also particularly quiet, making it ideal for use in stables, for example. The side extension for the minidumper increases the loading volume of the dumper by more than 60%. The side extension is ideal for loose, light goods such as straw, hay, light rubble, etc. Please note that the permissible payload of 500 kg remains unchanged. The SCHORR electric motorized wheelbarrow offers an impressive battery life of 8 to 10 hours, so you can easily get through the day or shift. The charging time is approx. 7 hours for 100%. The battery dumper is easily charged via the charger included in the scope of delivery at a normal 230V socket. The compact size of the electric dumper in combination with the swivel rear wheels makes it particularly flexible and maneuverable. It is therefore ideal for use on tight construction sites or in narrow aisles (e.g. in horse stables). SCHORR RR500DEHRAS electric dumper - Discover the advantages: Load capacity up to 500 kg Increased loading volume Hydraulic tipping drive (tipping without effort) Very easy to operate without effort Powerful 1000 watt 48V electric motor Very low-noise & low-vibration operation Compact size - ideal for tight working areas Technical specifications Kodeufx Utspfx Ah Newt Load capacity: 500 kg Weight: 209 kg Tilt drive: Hydraulic Motor: 48V electric motor 1000 Watt 4 lead acid batteries (á 12V, 32Ah) Battery life: 8 - 10 hours Charging time: 6 - 7 hours to 100% charge Speed: Forward 1st gear: max. 3.3 km/h Forward 2nd gear: max. 4.2km/h Forward 3rd gear: max. 5.0km/h Reverse: max. 1.5km/h Overall dimensions: 173cm x 77 cm x 103 cm Tank dimensions: 1061mm x 674mm x 670mm Container water capacity: 150l Load volume (depending on filling) up to 500l The SCHORR electric dumper is ideal for transporting heavy loads and solid materials (e.g. stones, sacks, pallets, etc.). With a load capacity of 500 kg, this wheelbarrow with electric motor is a real powerhouse that can also handle larger loads effortlessly and, above all, quietly. Thanks to the hydraulic tipping trough with a large tipping radius, you can unload your load easily, quickly and completely. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We will be happy to answer any questions you may have about our electric motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Kwedpfoxnnd Rsx Ah Njt Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Max Panel Length: 55 mm Kedpfx Aorl Utboh Newt

Condition: excellent (used), Workbench Brand Garant Kombi, lockable Width 1500 mm Depth 700 mm Height 850 mm Height with pegboard 1330 mm Total width with vise 940 mm Vice Leinen junior 125 Base cabinet with 5 drawers Kwodpfx Aswc Nvtoh Nst 1 x 50 mm high 1 x 90 mm high 1 x 125 mm high 1 x 165 mm high 1 x 225 mm high

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced Kwedpfxjtpu Szo Ah Njt -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection.

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. Kwjdeh Tm Duepfx Ah Nst CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.