Mobile shredder ARJES VZ 850 D

ARJES VZ 850 D

Condition: good (used), Industrial robots Manufacturer: Kuka Model: KR6, KR6-2, KR6arc Model: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F All models equipped with KRC2ed05 control system Kuka KR6 KRC2ed05 Year of manufacture 2006 Kuka KR6-2 KRC2ed05 Year of manufacture 2011 Kuka KR6arc KRC2ed05 Year of manufacture 2006-2007 = several units in stock Kuka KR16L6 KRC2ed05 Year of manufacture 2009 Kuka KR16L6-2 KRC2ed05 Year of manufacture 2011 Kuka KR16 KRC2ed05 Year of manufacture 2007-2009 = several units in stock Ncedpfx Ajtuc U Recbet Kuka KR16-2 KRC2ed05 Year of manufacture 2010-2012 = several units in stock Kuka KR16-2 Speed KRC2ed05 Year of manufacture 2012 = several units in stock Kuka KR16-2 Foundry KRC2ed05 Year of manufacture 2012

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Njdpfx Aeh Eld Escboct Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: new, Year of construction: 2025, Features: - Overband Neodymium Magnetic Separator - HP - Dust suppression - Conveyor belt speed control - Self-propelled chassis for semi-trailer Nsdpfx Acew Elbdsbect

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Nedownx Uispfx Acbect Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ Ncjdpfxob Nulhj Acbet 1) Bale Shredder MHB: Special price starting from €22,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency converter (FU) – this regulates the speed of the shredding floor. The bales are placed on the shredding floor, and the feed of the shredder is activated. The tines of the shredder tear the straw from the bale and fling it into the hopper. Ideally, the combination of bale shredder and straw shredder is recommended here. Technical data, bale shredder: Performance: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill, kW, number of straw mill). Without a straw mill, the bale shredder can even process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (l x w x h) Shredder motor: 5.5 kW, 380 volts Shredding floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (l x w x h) Weight: 400 kg 2) Straw Shredder MHZ 600 - 11/15 kW; immediately available Special price starting from €6,995 net Surcharge for the even larger straw shredder (18.5 kW) + €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380-volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm aperture With star-delta switch, overload protection, and 8 m power cable, ready for connection Discharge nozzle: 160 mm Discharge distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (l x w x h) Weight: approx. 240 kg --- Options available at an additional cost: Infeed auger + €970 net Cyclone (mounting on site by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial dust extraction system (demonstration model) + starting from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: starting from €1,620 net Special shredder extension, 3 m *other sizes will be calculated + €9,750 net Briquette press MPP 180 S; little used demonstration model 70 mm briquettes - up to a maximum of 100 kg/h Starting from €39,700 net * larger machines on request --- Description: The muetek bale shredder was developed for shredding round and rectangular bales of hay and straw. The shredder flanged onto the bale shredder shreds straw from all types of cereals, hay, corn, and miscanthus. The muetek machines in the MHZ/MHB series are characterized by their robust construction and solid design. muetek bale shredders in the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredding rotor; the feed speed is adjustable. The shredding rotor is equipped with several tines that tear open the straw bale. The straw separated from the bale is discharged. --- In principle, the machines work for dry raw materials: - Straw - Hay --- Shredding hemp only works with a special shredder Surcharge approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the raw material: Moisture content maximum 12%

Condition: used, Year of construction: 2015, operating hours: 25,000 h, functionality: fully functional, rotor length: 2,200 mm, rotational speed (min.): 58 rpm, overall weight: 30,000 kg, power: 220 kW (299.12 HP), input voltage: 400 V, Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without massive disruptive substances. Application: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and material recycling, loose or baled. Lindner Jupiter 2200 Drive power: 2x 110 kW (ABB) Screen basket cassette: 148 mm Control cabinet: complete with (FU-ABB) Recooler: Yes, included Working opening: 2190 x 1750 mm Filling volume: approx. 5 m³ Rotor length: 2190 mm Rotor circle diameter: 745 mm Rotor speed: 50 Hz: 58 rpm Number of rotor knives: 24 pieces Knife size, pointed knife: 145x145x47 mm Counter knife below: 6 pieces Scraper comb above: 6 pieces Ncodpfew Tk E Aox Acbet Hydraulic feed: 11 kW Weight: approx. 30 t Dimensions LxWxH mm: 5300 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: good (used), power: 122 kW (165.87 HP), overall weight: 27,000 kg, Year of construction: 2001, operating hours: 21,200 h, For sale is a Sennebogen 825 Year of manufacture: 2001 Nsdoua At Nepfx Acbsct Operating hours: 21200 Total weight: 27000Kg

Condition: used, Eldan Granulator HG129 Nsdpfxot Uyvrj Acbsct

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Ncjdpfx Aen I Rgpecbot Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Nodpfx Acsvf E Avebjct Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.