Twin-shaft shredder

Arjes / Eggersmann Impaktor 250 EVO II

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Psdpfxevm Upne Amyspw Lower belt BB 1350 mm AA 6.4m -profiled belt- SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Pedpor Nfvmofx Amyspw Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state. Ppedpfxsic Rl Ds Amyow

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Pjdpfxsxx Tige Amyepw Watering system Delivery date to be arranged Available from 06/2026

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Buyer to decommision and collect. Pedpfx Amsxftiteyepw This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine

Condition: new, Funnel opening: 2,500 x 2,000 mm Rotors: 2 units Rotor diameter: 580 mm each Rotor design: 5 and 6 cutting teeth Drive: 2 x 90 kW with planetary gearboxes Ppodpfxjbq St Hs Amyjw Hydraulic locking system for sieve flaps to remove disruptive materials Weight: approx. 18,500 kg

Condition: used, Year of construction: 2014, operating hours: 18,700 h, overall weight: 27,000 kg, number of blades: 41, rotor length: 1,800 mm, power: 200 kW (271.92 HP), rotational speed (max.): 87 rpm, input voltage: 400 V, Slow-speed, robust single-shaft shredder suitable for the pre-shredding of various materials without heavy contaminants. Applications: Shredding of industrial and commercial waste, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal recovery or material recycling, whether loose or baled. Ppedpfjw Tk Udox Amyew Lindner Jupiter 1800 Drive power: 1x 200 kW (ABB) Screens: SK 80 mm Control cabinet: complete with (ABB frequency inverter) Recooling unit: Yes, included Feed opening: 1790 x 1750 mm Filling volume: approx. 4 m³ Rotor length: 1770 mm Rotor diameter: 745 mm Rotor speed: 50Hz : 87 rpm Number of rotor knives: 41 pcs Knife dimensions, pointed knives: 87x87x38 mm Counter knives, lower: 5 pcs Scraper comb, upper: 5 pcs Hydraulic feed: 11 kW Weight: approx. 27 t Dimensions LxWxH mm: 4800 x 3260 x 3090 mm Hopper: included Delivery time: immediate

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Ppodpfx Amjun Sx Soyew Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: new, - Motor power: 9 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons - Splitting table: straight design Psdpfx Amsgl Ac Seyjpw - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: used, Column drilling machine ALZMETALL, type AB 3 ESV Machine no. 15967, year of manufacture 1977 Drilling capacity 32 mm Spindle mount MK 3 – short quill Distance from spindle nose to table 545 mm (short quill) Distance from spindle adapter to table 395 mm (MK adapter) Overhang 290 mm Quill stroke 160 mm Table size Ø 545 mm Column diameter 220 mm Spindle speed 55 – 1450 rpm, continuously variable Motor power 1 / 1.6 kW Power connection 380 volts, 50 Hz - Spindle speed controlled via 2 gear stages, 2 motor speeds, and continuously variable via a variator gearbox - Pre-selection stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Rotatable drilling table - Table height adjustment via hand crank Ppsdpfxjharwvs Amysw - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg Good condition