Used telehandlers for sale (300)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Hedpfxox Dmgvs Ag Defr Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. A translated version of the maintenance report is attached as a document.

Condition: used, Year of construction: 2002, operating hours: 4,120 h, 2002 | Manitou MT523 | Used Telescopic Forklift | 4120 hours 📍Location: France, Fontenay-sur-Eure 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 55 inspection points 47 approved ✅ 7 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: The unit ran during the inspection, except for what was noted. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40034 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Hfedsx Hpinjpfx Ag Dsr ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 4,384 h, load capacity: 3,500 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,300 mm, power: 85 kW (115.57 HP), empty load weight: 5,500 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,300 mm, Rigid telehandler Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: good Front tires type: Pneumatic Front tires condition: 40 - 60% Hsdpfx Agsx Hmvrj Djfr Rear tires type: Pneumatic Rear tires condition: 40 - 60% Description: Telescopic handler JLG 3509 - - - Year of manufacture 2007 - - - 4,384 operating hours according to display - - - 3.5 ton lifting capacity - - - 9 m maximum lift height - - - Level compensation - - - JOYSTICK CONTROL - - - mechanical QUICK COUPLER - - - 4-wheel steering - - - 4-wheel drive - - - 3 steering modes - - - 4-speed hydrostatic drive - - - 4-cylinder PERKINS turbo diesel engine, 115 hp - - - 5.5 t unladen weight - - - 2.3 m wide - - - 5.5 m long - - - 2.3 m high - - - includes used pallet forks - - - good condition - - original paintwork - - - very agile and easy to operate telehandler - - NEW bucket available at extra charge Quick coupler, 3rd hydraulic circuit, heater, full cab, CE certificate,

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s Hedpfxjxd Hwns Ag Djfr · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,260 h, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,900 kg, total length: 7,840 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telescopic Handler Load Center: 500 Mast Type: Telescopic Transmission: Hydrostatic Speed Class: 20 Condition: Ready for operation and fully functional Technical Condition: Good Front Tyre Type: Pneumatic Front Tyre Size: 445 / 65 R22.5 Front Tyre Condition: 80 - 100% Rear Tyre Type: Pneumatic Rear Tyre Size: 445 / 65 R22.5 Rear Tyre Condition: 80 - 100% Description: The alternative to a mobile crane, wheel loader, or conventional telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is the perfect construction machine. It can handle loads up to 5,000 kg and perform work at heights of up to 25 m. As a 3-in-1 machine (telehandler + crane + work platform), it offers a wide range of daily applications. Its boom, consisting of four sections, and 360° rotation capability allow for a variety of material handling tasks from a fixed position. The rotary telehandler is equipped with the E-Reco attachment recognition system, which saves you time by informing you of the correct working range and provides additional safety by automatically detecting potential overloads. - 3rd control valve - Rear work light - Front work light - Heater - Work platform pre-installation with radio remote control - Fork carriage PFB/1320 mm - Forks 150 x 50 x 1200 mm - Load protection grid - 7" LCD color display - Automatic parking brake - Return line - Tyres 445/65 R 22.5 - Reversing alarm - Rotating beacon - Attachment recognition system - CAN bus control - AdBlue Hfjdpfx Ajxdpdkog Dor

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 85 h, Rösler S1 – Smarter All-rounder for 3D Printing or Conventional Blasting Rotary Drum Diameter: Ø 400 - 650 mm Year of Manufacture: 2020 Number of Blast Nozzles: 2 pcs Number of Blow-off Nozzles: 2 pcs Filter with cyclone and screening deck automatic and manual blasting Dimensions: 200x130x200 cm (LxWxH) The Rösler S1 from the S-Line series is a compact all-round talent for demanding surface finishing applications. Originally developed for post-processing powder bed-based 3D printing technologies, it automatically cleans, smooths, and homogenizes components – quickly, reproducibly, and economically. At the same time, depending on the component and blasting media, the S1 is also ideal for traditional blasting operations such as cleaning, descaling, deburring, or achieving decorative surface finishes. A special highlight is the integrated blast media conditioning system: Hsdpfsx H N Anjx Ag Dofr A cyclone separator and a vibrating mesh screen reliably separate waste, dust, and worn blasting media. Only clean, high-performance blasting media remains in the circuit, ensuring consistent blasting results and protecting sensitive components. The integrated PLC control allows all relevant process parameters to be stored in programs—such as blasting duration, blasting pressure, or drum rotation speed. These programs can be retrieved and adjusted at any time, enabling reproducible blasting processes, quick product change-over with minimal setup time, and simple, safe operation even with frequently changing components. Quick media change in combination with the cyclone and vibrating mesh screen makes the S1 a true all-rounder: The system can be adapted in no time to different materials, component geometries, and blasting tasks—from additively manufactured plastic and metal parts to conventional serial components. Your benefits at a glance: - All-round blasting system for diverse applications - PLC-controlled processes with storable programs for reproducible results and quick product change-over - Integrated cyclone and vibrating mesh screen for clean blasting media and consistent blast quality - Fast media change for maximum flexibility in daily operations - Compact, robust plug-and-play design for easy integration into existing production lines

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,911 h, lifting height: 4,550 mm, fuel type: diesel, mast type: telescopic, gearing type: automatic, tire condition: 100 %, overall weight: 9,000 kg, empty load weight: 5,500 kg, color: yellow, first registration: 04/2016, maximum load weight: 3,500 kg, axle configuration: 4x4, tire size: 27X10-12, number of seats: 1, Equipment: all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, JCB TLT35D 4x4 – 2016 – 1911 HOURS – DIESEL – TELESCOPIC MAST 4550 mm – CONDITION 5/5 🚜 Premium Quality Forklifts – FT LOGISTICS Ready for immediate operation. No compromises. 🔧💪 This JCB TLT35D 4x4 is a professional-grade machine designed for demanding users seeking reliability, performance, and precision. Fully serviced, visually refurbished, and maintained to the highest standards—it looks like new and is ready for instant deployment. ✔ Main Technical Specifications: 📅 Year of manufacture: 2016 ⏱ Operating hours: 1911 ⛽ Engine: Diesel 📦 Load capacity: 3500 kg 📏 Mast: Telescopic – lift height 4550 mm 🎯 Fork positioner: 1200 mm Hjdpfxjx H Ir Io Ag Defr 🔩 Forks: 1100 mm 🛞 Tyres: Superelastic, 100% new 🔧 Condition: 5/5 – fully serviced ✨ Visual condition: refurbished, no rust 📐 Dimensions: • Height: 2300 mm • Overall height: 2300 mm • Length: 3150 mm • Width: 1400 mm 🛞 Tyres: Front 27x10-12 | Rear 27x10-12 ✔ Ideally suited for: 🏭 Logistics centers and high-rack warehouses 🏗 Construction and installation companies ⚙ Manufacturing plants 🌾 Agricultural and industrial applications 🌍 Outdoor use thanks to 4x4 drive 🎯 High-lift and precision work The 4550 mm telescopic mast allows for uses far beyond standard forklifts. FT LOGISTICS – Quality You Can Trust ⚙️🔝 All our machines undergo thorough servicing, testing, and visual inspection. With FT LOGISTICS, you receive equipment that is checked, reliable, and ready to operate immediately.

Condition: used, Year of construction: 2006, 2006 | JCB 535-140 | Used Telescopic Forklift 📍Location: France, Joué-lès-Tours 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 60 inspection points 27 approved ✅ 6 imperfect ℹ️ 27 issues ⚠️ 📌 Inspector's Comment: For parts or repair requires a new engine conrod what thought or repairTHIS WAS A VISUAL INSPECTION ONLY 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40115 Equippo" is commonly used when looking up more details online. Hfedpex E U Slsfx Ag Djr 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 8,630 h, load capacity: 4,000 kg, lifting height: 12,000 mm, fuel type: diesel, drive type: Diesel, Rigid telescopic handler Hjdpfx Aox Enxlog Dsfr Condition: Ready for use and fully functional Technical condition: Good

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard Hfjdpfx Asxd Htieg Djr · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 805 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, construction height: 2,500 mm, empty load weight: 12,400 kg, total length: 6,420 mm, drive type: Diesel, construction width: 3,790 mm, Telescopic handler, rigid Hedpfx Agev Swphj Defr Speed category: 25 Technical condition: very good

Condition: used, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,350 mm, fuel type: electric, construction height: 2,320 mm, gearing type: automatic, Equipment: cabin, YEAR OF MANUFACTURE: 2025 JCB TELETRUK TLT35-26D - Diesel Industrial Telescopic Forklift - Operating hours: 143h Hjdewz S Rdjpfx Ag Djfr Lift height: 4.35 m Load capacity: 3,500 kg - Immediately available & direct from the JCB dealer! - - CommandPlus driver’s cab with heating, air-suspended & heated driver’s seat - Engine: [46kW/63hp] Emission Stage 5 - Joystick control / single-lever operation (wheel loader/telehandler style) - Load moment indicator with overload cut-off in accordance with EN15000 - LED lighting front and rear, road-legal (StVZO) - 2x auxiliary hydraulics, 70 l/min - Industrial PRO version - Pallet forks FEM3B, 1,200mm - Reverse warning device (“white noise”) - BlueSpot (visual warning device) - Pneumatic tires: 27x10x12 traction tread - Hydraulic quick coupler with integrated sideshift - LiveLink telemetry system hardware incl. remaining license - 1x pallet fork FEM3A with 1,200mm forks - We are an authorized JCB dealer (A-dealer) - We kindly request that you schedule an appointment before your visit. On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel. ...) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Technical condition: New Front tires: 400/70-20, field tread pattern Hfodpfxsxntnbe Ag Der Rear tires: 400/70-20, field tread pattern

Condition: used, Year of construction: 2005, operating hours: 3,600 h, 2005 | JCB 535-140 with forks and loading bucket | Used Telescopic Forklift | 3600 hours 📍Location: France, Joué-lès-Tours 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 59 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The unit functioned during inspection recommended full service and filters Hsdpfx Aox El Rrjg Djfr 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40116 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2016, operating hours: 2,700 h, fuel type: diesel, mast type: telescopic, Machine ready to work Hjdpfxeuqu Rio Ag Defr Feel free to contact me

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, fork length: 1,200 mm, total length: 10,300 mm, - Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A Hjdpfx Agox Edw Uo Djfr - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,062 h, load capacity: 8,000 kg, lifting height: 26,600 mm, fuel type: diesel, construction height: 3,120 mm, empty load weight: 22,500 kg, total length: 8,250 mm, drive type: Diesel, arm reach: 23,100 mm, construction width: 2,530 mm, Rotating telehandler Hfsdsvgi A Nspfx Ag Der Speed class: 40 Technical condition: very good

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Hfodpsw Eqdkofx Ag Der Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 7,785 kg, lifting height: 7,000 mm, Year of construction: 2018, operating hours: 3,615 h, total length: 5,000 mm, construction height: 2,480 mm, drive type: Diesel, load capacity: 3,500 kg, construction width: 2,400 mm, Telehandler, rigid Speed category: 40 Technical condition: normal Battery condition: normal Hodeumvdpopfx Ag Djfr

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 116 h, load capacity: 4,000 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Hedpfx Aev Ezt Dog Dofr Rear tires Condition: 80 - 100% 3rd valve, 4th valve, heating, full cabin, CE certificate, Specifications: -Carrying capacity 4000kg -Lifting height 16,4m -MAX gradeability 40% -Curb weight 13040kg -Engine KUBOTA 85,1kw ( 114hp ) -Capacity 3769cm3 -Emission standard Tier4f -Steering Front wheel steering, all wheel steering and crab steering.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,957 h, load capacity: 4,000 kg, lifting height: 7,600 mm, fuel type: diesel, construction height: 2,480 mm, empty load weight: 8,600 kg, total length: 5,300 mm, drive type: Diesel, construction width: 2,400 mm, Telehandler, rigid Speed category: 40 Hedpfjv Ez S Tox Ag Defr Technical condition: normal Battery condition: normal

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Front tires type: Air Hodpsw Eqdqofx Ag Dofr Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 470 h, load capacity: 3,000 kg, lifting height: 8,850 mm, fuel type: diesel, construction height: 1,990 mm, empty load weight: 6,650 kg, total length: 4,664 mm, drive type: Diesel, construction width: 1,990 mm, Telescopic handler, rigid Hedjw Egv Nspfx Ag Djfr Technical condition: good Battery condition: good

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 775 h, load capacity: 2,526 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,830 mm, drive type: Diesel, construction width: 1,810 mm, Rigid telescopic handler Hsdpfx Agswlxh Re Defr Speed class: 25 Technical condition: Good

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 877 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 4,800 kg, total length: 3,900 mm, drive type: Diesel, construction width: 1,810 mm, Rigid telehandler Hsdpfx Agewlxh Dj Djfr Speed class: 25 Technical condition: good Battery condition: good