GMW Gesellschaft für Mittelstandsberatung und Warenhandel mbH

Condition: good (used), Year of construction: 2010, Universal Machining Center Machine type: Grob G 550 Control system: Siemens 840 D sl Year of manufacture: 2010 TECHNICAL DATA: Travels: X axis: 800 mm Y axis: 950 mm Z axis: 1,020 mm B axis C axis Number of controlled axes: 5 Horizontal milling spindle Speed range: 9,000 rpm Torque: 470 to 575 Nm Tool holder: HSK 100 Tool changer Tool stations: 60 (2 x 30) NC rotary-swivel table Pallet size: 630 x 630 mm Number of pallets: 2 Features: Chip conveyor Internal coolant supply (IKZ): bar Coolant system Machine kinematics optimization with Cycle 996 Tool cleaning device Tool breakage monitoring: Blum Laser Touch probe: M&H Air through spindle center Chip rinsing gun Lodjyw Idfjpfx Ahvsri Electronic handwheel Oil mist extraction

Condition: used, Year of construction: 2014, x-travel 850 mm y-travel 850 mm z-travel 700 mm Control Heidenhain TNC640 spindle tunring speed 30.000 U/min tool taper HSK 63A number of tool places 40 Pos. NC rotary/swivel table Ø 800 mm a-axis -30/+120 ° Lredpfxsywnv Uo Ahvsi 360 ° max. workpiece height Ø 850 x 630 mm max. workpiece weight 1.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2008, operating hours: 82,828 h, functionality: fully functional, machine/vehicle number: 1144 000316 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 80 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 1,400 kg, rotary table diameter: 900 mm, rotational speed (max.): 30 rpm, overall weight: 15,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 30,294 h, spindle motor power: 44,000 W, spindle nose: SK50, number of slots in tool magazine: 60, Equipment: rotational speed infinitely variable, For sale: DMG DMU 80P Duoblock machining center from 2008. The machine is already located in Poland and can be inspected under power. Key specifications: • Control: Heidenhain iTNC 530 • Spindle taper: SK50 • Spindle speed: 10,000 rpm • Operating hours: approx. 30,000 h • Workpiece probe: Heidenhain • Tool probe: BLUM • 3D Quick Set software Lrodpfeyvufmsx Ahvei Additional information: • Fully functional • In continuous operation until dismantling • Good technical condition Machine is available immediately. Inspection under power possible. Please contact me for price, additional photos, or technical details.

Condition: used, Year of construction: 2024, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 6LUE00127, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, torque: 180 Nm, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 1,000 kg, total height: 3,600 mm, total length: 3,780 mm, total width: 2,420 mm, table load: 1,000 kg, rotary table diameter: 800 mm, overall weight: 21,000 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 30 h, coolant supply: 42 bar, distance table center to spindle nose: 100 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 64, tool length: 300 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 120 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Maximum stability with 21,000 kg mass High speed thanks to torque drives in the A/C axes 5-axis simultaneous machining Demonstration machine at used machine price Equipment: - Heidenhain TNC 640 - Heidenhain glass scales on all 5 axes Lredpfxjyvk Tte Ahvei - Kinematic Optimizer - 15,000 rpm direct drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production package I with 42 bar CTS (coolant through spindle) - Air through spindle - Automatic workpiece measurement Renishaw OMP 40 - Laser tool breakage control Blum - Paper band filter system - Spindle ring flushing system - 64 tool magazine slots - SK40 - Scraper belt chip conveyor with pre-filtration - Chip flushing - Extraction system

Condition: used, Year of construction: 2001, x-travel 800 mm y-travel 400 mm z-travel 350 mm Control SIN840D A - axis 360 x 0,001 ° B - axis -30 - +90 x 0,001 ° workpiece diameter 15 - 80 mm workpiece length - max. 800 mm tool taper SK40 spindle turning speed - stepless 36 - 12.000 U/min power capacity - milling spindle 14 / 21 kW feed X/Y/Z/-axis 1 - 10.000 mm/min rapid traverse X/Y/Z 45,00 m/min toolpiece magazine: chain magazine 60 Stück tool length - max. 250 mm tool diameter 88 mm wotkpiece diameter with 2 vacant positions 125 mm weight of tools max. 12,00 kg total power requirement 37,00 kW weight of the machine ca. 11,00 t Lredpfsyu U Ahox Ahvsi dimensions of the machine ca. 6,00 x 5,00 x H3,50 m 5-axis machining center with Siemens SINUMERIK 840D control, IRCO RBK7212 bar feeder, chip conveyor, coolant system, coolant through the spindle (70bar).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 30 kVA, torque: 151 Nm, controller manufacturer: Fanuc, controller model: Fanuc 0i MD, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,721 mm, total length: 3,420 mm, total width: 2,200 mm, table load: 200 kg, rotary table diameter: 400 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,532 h, coolant supply: 20 bar, distance table center to spindle nose: 438 mm, spindle motor power: 15 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 110 mm, tool weight: 7,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a Leadwell V-40L 5AX CNC machine (2011). The machine is in perfect working condition and currently under power. Machine information: Year: 2011 Operating hours: 6,532h Power-on hours: 18,398h Controller: Fanuc 0i-MD Travel (XYZ): X 850mm / Y 630mm / Z 610mm (spindle nose to rotary axis, max. 438mm horizontal) Rapid traverse: 36m/min (all axes) Rotary table: 400mm Max. load: 200kg Max. diameter: 630mm Spindle power: 15kW (S1) Spindle speed: 12,000 rpm Spindle taper: SK40 Magazine capacity: 30 positions 3D probe: Renishaw OMP60 Oil mist separator: Losma Chip conveyor: 1x chain conveyor, 2x screw conveyors Internal coolant: 20 bar Zero-point clamping system: Brand - LANG, 96mm Lsdpoyrh Acsfx Ahvjri Inspection possible in Maribor, Slovenia. For more videos (spindle test up to 12,000 rpm, tool change) please contact us.

Condition: used, Year of construction: 2001, x-travel 880 mm y-travel 630 mm z-travel 630 mm Control Heidemhain type 426/430 spindle speed: 18000 spindle taper HSK 63 surface area 1250x700 mm Rotary table 700 mm Table load 1000 kg b-axis Schwenkopf 0,001 ° c-axis 0-360° Rundtisch 0 B-axis C-axis Air blow through the spindle HSK 63 Electronic handwheel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Lrsdeyqukdjpfx Ahvsi We look forward to your visit. Your Markus Hirsch Team

Condition: used, x-travel . mm y-travel . mm z-travel . mm Control . type . spindle speed: . spindle taper . surface area . mm Rotary table . mm Table load . kg b-axis . ° c-axis . 0 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Lodpfeyqtdcjx Ahvori More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, table load: 850 kg, overall weight: 12,500 kg, We are getting 2 Pieces Hermle C42U Dynamic in stock with full options: Machine 1 2013 with 24.700 spindle hours Machine 2 2014 with 19.800 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550mm Spindle HSK-A63 18.000 RPM Both Machines are equipped with following options. Internal coolant 80 bar Touch probe Laser Pallet changer PW850 (pallets included) Chip conveyor Siemens 840D Control Lsdpfx Ahoypt Edovori Machine will be available middle of March.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology Lrsdpfxoym Nb Ao Ahvoi - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 550 mm Travel range Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Number of tool stations: 40 Table dimensions: 850 mm x 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Chip conveyor manufacturer: KNOLL Paper band filtration system manufacturer: KNOLL Zero-point clamping system model: SCHUNK SDE 138 Ledpfx Ahoym Anpjvori Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Machine weight: 10,000 kg EQUIPMENT Tool holders and tools on the tool changer Measuring probe Recently fitted new spindle Note: A truck with a width of 3,000 mm is required for transport. External reference: Lot 11 / Wittner

Condition: excellent (used), Year of construction: 2016, operating hours: 10,250 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, table width: 800 mm, table length: 630 mm, table load: 1,400 kg, overall weight: 12,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10,250 h, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Hermle C42U Dynamic in excellent, well-maintained condition. Travel Paths: X: 800 mm Y: 800 mm Z: 550 mm A: +/-130 degrees C: 360 degrees Equipment: Control: Heidenhain TNC 640 Spindle interface: HSK-A63 Spindle speed: 18,000 rpm Large machine table: 800 mm x 630 mm Swivel rotary table with tandem drive C-axis with torque drive Dynamic version linear axes IKZ (internal coolant supply) 80 bar with variovalve Scraper belt conveyor Tool changer plus Additional tool magazine ZM50 for a total of 92 tool stations Manual cabin door Manual cabin roof Laminated safety glass window Comfort operator panel External minimum-quantity lubrication Tool measurement A2 Blum (tool breakage/measurement) 3D probe M&H Internal air blow External air blow Bed flushing Handte Compact extraction unit Electronic handwheel Purge air for glass scales Electronic thermal compensation with control functions HIMS basic package Special stop block Interpolation turning TNC 640 Rotoclear visibility aid and more… The machine can be inspected under power by prior arrangement. Machine is immediately available! Loading will be handled by us! Lrjdpfx Aoyma Nkshvoi

Condition: excellent (used), Year of construction: 2002, CNC Machining Center DECKEL MAHO DMU 80 T Year of manufacture: 2002 Control: Heidenhain iTNC 530 Ledpfoylk Syjx Ahvjri Spindle: replaced on 14.11.2018, approx. 17,000 hours Technical data: Travel paths: X: 880 mm Y: 630 mm Z: 630 mm Controlled B-axis in milling head: -15° to 90° Spindle speed: 12,000 rpm Tool changer capacity: 32 positions Tool holder: SK 40 Coolant system: available

Condition: excellent (used), Year of construction: 2008, 5-Axis Machining Centre DMG Deckel Maho DMC 80 U Duoblock Control: Siemens Sinumerik 840 D Year of manufacture: 2008 Travel paths: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Spindle interface: HSK 100 Tool magazine: 60 positions Gear-driven spindle: 8,000 rpm Max. workpiece diameter: 900 mm Max. workpiece height: 1,450 mm Chip conveyor Coolant system with deep bed filter Coolant supply through the spindle 2-position pallet changer 3D measuring probe (Renishaw) Blum laser Lodjyligcjpfx Ahveri Extraction unit

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Ljdpfx Asyhnudehvori Electrical cabinet air conditioning unit

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4501, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotational speed (min.): 6,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Machine configuration: Lsdpfx Ahoygtqbeveri • UniSpeed3500 • Central chip conveyor • Control panel for side and front operation • Platform • Padded seat • Rotoclear side viewing window • 3-color signal lamp • Main drive up to 6,000 rpm • Tool holder SK 50 BigPlus • Orthogonal milling head (C-axis 0.01°, A-axis 0.01°) • Siemens Sinumerik One • HT2 handheld operating device • Rotary table Ø 1,600 mm, 8 t • Side milling table segments • ToolRunner for 90 tools • Coolant system 950 l • Coolant pump 40 bar / 32 l/min • Coolant-to-air switching • Wash gun in working area • m&h wireless probe • 1-channel collision monitoring system • Operating mode 3 • Air purification system 4,000 m³/h

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 820 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, General Control: Max 5 Year of manufacture: 2023 Lodsyap Tfspfx Ahvjri Working Area Travel X: 820 mm Travel Y: 550 mm Travel Z: 500 mm Travel B: +110° / -110° Travel C: 360° Tool changer: 60 stations Rapid traverse X/Y/Z: 36 / 36 / 36 m/min Spindle Speed: 12,000 rpm Power: 16 kW Tool holder: SK40 NC Rotary Table Clamping surface L x W: 600 x 600 mm Spindle nose to table: 150 - 650 mm Table load capacity: 350 kg Equipment Chip conveyor Coolant supply Direct path measuring system Through-spindle air 5-axis simultaneous capability Workpiece measurement Tool measurement High-pressure coolant (IKZ)

Condition: used, Year of construction: 2006, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table Lrjdoyackdepfx Ahvoi - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2007, x-travel 880 mm y-travel 630 mm z-travel 630 mm Lrsdoyaci Tspfx Ahvsi control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A 63 swivellable B: +30° / -120 ° table surface area Ø 700 / 1.250 x 700 mm max. table load 650 kg rotatable C: 360 ° number of toolpositions 2x16 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm feed speeds max. 30.000 mm/min rapid traverse 30 m/min total power requirement 48 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,6 m 5 Axis CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 monoBLOCK - NC-Rotary Table (C-Achse) integrated in rigid-table - Swivel-Milling-Head (B-Achse)

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control SIN840D spindle turning speed - stepless 5 - 10.000 U/min power capacity at 40 % load 38,00 KW power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 kW spindle taper HSK 100 feed X/Y/Z/-axis 0 - 60.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed capacity X/Y/Z 12,00 kN B - axis 180 x 0,001 ° rapid travel B-axis 10,00 U/min size of pallet 800 x 630 mm table load 0,80 t C-axis 360 x 0,001 ° rotary table speeds infinitely variable 1 - 800 U/min power capacity - table 13,85 kW max. torque on the faceplate 1.550 Nm Lrsdpfsx Tiy Tex Ahvsi toolpiece magazine: chain magazine 60 Stück tool diameter 110 mm wotkpiece diameter with 2 vacant positions 230 mm tool length - max. 450 mm weight of tools max. 30,00 kg total power requirement 80,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 7,50 x 5,50 x H3,50 m 5-axis machining center with SIEMENS SIN840D coolant filer system 980l, chip conveyor, coolant through the spindle, extraction, BLUM tool measurement, measuring probe, operating mode 4, tool cone cleaning, hydraulic clamping with proportional valve.

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 80 T Control: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 15000 mm/min Work envelope: X: 800 mm, Y: 650 mm, Z: 550 mm Tool holder: SK40 DIN 2079 Draw bolt DIN 69 872 Tool changer: 25 positions Max tool diameter: 160 mm Max tool extension from spindle nose: 315 mm Work table: Dimensions: 1100x600 mm T-slots: 9 x M14 Permissible workpiece weight: 500 kg Transport data: Weight: 5800 kg Dimensions (L x W x H): 3.05 x 2.40 x 2.45 m Ljdpfx Ahox Tapfsvsri

Condition: ready for operation (used), Year of construction: 2004, operating hours: 55,476 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN Mill Plus IT, spindle speed (max.): 12,000 rpm, New motor spindle in 2012 TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Motor spindle speed: 12,000 rpm Tool holder: HSK-A 63 Tool magazine positions: 120 Table speed: 500 rpm Lrjdpfx Asx Sqr Iehvji Torque: 1692 Nm Table diameter: Ø 800 + 630 mm Load limit: 800 kg MACHINE DETAILS Control: HEIDENHAIN Mill Plus IT Spindle hours: 55,476 h EQUIPMENT Universal milling head with controlled B-axis 2 pallets 800 mm x 630 mm Pallet changer Rotating inspection window Operating mode 4 Tool breakage monitoring

Condition: good (used), Year of construction: 2003, For technical data, see images.... Ledpfx Aex R S R Nohveri

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Lodpox Dlf Refx Ahveri Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: good (used), Year of construction: 2001, functionality: fully functional, The machine is in good technical condition, test run possible, Siemens Sinumerik 840D control system. Pallet dimensions: 500 x 630 mm Axis travels X / Y / Z: 1 - 60,000 mm/min Tool magazine: 60 positions Specifications: X axis: 800 mm Z axis: 800 mm Y axis: 800 mm Max. workpiece weight: 800 kg Spindle taper: HSK 80 A Tool diameter: 95 mm Lrodjx A Ewkepfx Ahvji Machine weight: 12,000 kg Dimensions (L x W x H): 8000 x 4900 x 3800 mm