Naber LMB bv

Condition: used, Year of construction: 2024, working width: 85,000 mm, For inquiries regarding the attachment, please contact Mr. Herden (by phone) for assistance. Seppi M. H3 085 / Flail Mower / Mulcher / incl. MS03 / DEMO unit / in stock & immediately available / Excellent condition! Price: €7,040.00 net / €8,377.60 gross This mulcher has only been used briefly, for a single job! - Working width: 85 cm - Overall width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg Equipment: - incl. MS03 adapter plate - Mulching head for attachment on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tons - For mounting on various adapter plates - Float mounting (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the carrier unit’s oil flow - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, height-adjustable - Colour: red RAL3020, anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pcs, part no. 150.02.041 OPT 428 Hydraulic gear motor 11cc - With flow control valve and DRAIN SAFE TM motor safety valve protects the motor in case of misuse - Required hydraulic pressure in bar (min-max): 150 – 250 - Required hydraulic oil flow in l/min (min-max): 20 – 50 OPT 529 DRAINLESS system with pressure accumulator (NO case drain line required!!) - Including hoses and check valve Kwodpfsyklntox Agzsu 2 hydraulic lines are required: supply and return. No case drain! The unit is delivered without hoses or connectors. We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We offer a large inventory of various Seppi M. products in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing available upon request. We are an official sales and service partner for: - Seppi M. - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range! Subject to errors and prior sale! Internal ref. no.: 520013 = Further information = Please contact Marius Herden for further details.

Condition: new, working width: 85,000 mm, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. H3 085 Mulcher / NEW / in stock & immediately available Kwedeyi Ryxopfx Agzsu Price: €6,890.00 net / €8,199.10 gross - Working width: 85 cm - Total width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Suitable for mounting on various adapter plates - Floating attachment (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor, depending on the carrier’s hydraulic flow rate - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearings, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pieces, spare part no. 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - With flow control valve and motor safety valve DRAIN SAFE TM to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leakage oil line required!) - Includes hoses and non-return valve Optional: MS03 adapter plate incl. bolts and installation = €530 net Two hydraulic lines are required: supply and return. No leakage oil line is needed! The unit is supplied without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a large selection of various Seppi M. products in stock, all immediately available! Simply contact us at / . Financing offer available on request. We are official Seppi M. distributor and service partner. We are official Magni telehandler distributor and service partner. We are official DMS distributor and service partner. We are official Westtech distributor and service partner. We are official JCB construction machinery distributor and service partner. We are official Mercedes-Benz distributor and service partner. We are official Iveco distributor and service partner. We are official Holp distributor and service partner. We are official OilQuick distributor and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for more information.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross Ksdpfsyix Htox Agzewu - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulcher head for mounting on a hydraulic arm - Suitable for mulching grass and brush up to 3 cm Ø - For excavators from 2 to 5 tons - Suitable for mounting on various adapter plates - Floating mounting (parallelogram guide) - Indirect V-belt drive with 3 belts - Drive designed for hydraulic motor depending on the carrier’s oil flow rate Kodpfx Aeyix Hmsgzswu - Housing made of wear-resistant AR400 steel - Front guard with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearing, height-adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 units, part no. 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - With flow control valve and DRAIN SAFE TM motor safety valve to protect the motor in case of incorrect use - Required hydraulic pressure (min-max): 150 - 250 bar - Required hydraulic oil flow (min-max): 35 - 60 l/min Optional: MS03 adapter plate including bolts and installation = €530.00 net Three hydraulic lines required: feed, return, and drain. The device is supplied without hoses or fittings. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a large range of Seppi M. products in stock and available for immediate delivery. Mr. Herden (phone) will be happy to assist you. On request, we will be happy to offer you a financing option. We are an official sales and service partner for the following brands: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further Information = Contact Marius Herden for more information.

Condition: new, working width: 85,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H3 085 direct / Flail Mulcher / Mulcher / NEW unit / In stock & immediately available Price: €6,690.00 net / €7,961.10 gross - Working width: 85 cm - Total width: 102 cm - Depth: 80 cm - Height: 53 cm Kwedeyix Hgjpfx Agzsu - Weight: 165 kg - Mulches grass and brushwood up to 3 cm Ø - Suitable for excavators from 2 to 5 tonnes - AR400: Housing made of high-strength, wear-resistant AR400 steel - Universal interface for mounting various adapter plates - FLOAR: Floating mounting (parallelogram linkage) for adapting to ground contours - Direct drive, no V-belts - Drive for hydraulic motor depending on oil flow - Housing made of wear-resistant steel - Front guard with chains - Rear guard made of rubber - Height-adjustable support roller 133 mm Ø - Colour: anthracite RAL7021, red RAL3020 OPT 039 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMW flails (standard) - 9 pieces, part number 150.02.041 OPT 428 PLUG & PLAY - Hydraulic gear motor 11 cm³ with flow control valve - Required hydraulic pressure in bar (min-max): 150 - 230 - Required hydraulic flow in l/min (min-max): 25 – 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!!) - (max. return line (T) pressure 5 bar) Two hydraulic lines required: supply and return. No drain line! The unit is supplied without hoses or fittings. Optional: MS03 adapter plate including bolts and assembly = €530.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We keep a very large selection of Seppi M. products in our warehouse – all immediately available! Mr. Herden (tel.) will be happy to assist you. Upon request, we are happy to provide you with a financing offer. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Magni telescopic handlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further information.

Condition: new, working width: 125,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mower / incl. floating linkage / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 97 cm - Height: 57 cm Kwsdpfeyix Hajx Agzou - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tonnes - Universal mounting interface for installing various adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low design - Indirect V-belt drive with 4 V-belts - Drive designed for hydraulic motor depending on the carrier’s hydraulic flow - 4D ROLLER: reinforced support roller, 152 mm in diameter, with double-cone roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic flow in l/min (min-max): 55 – 150 OPT 099 Floating mounting (parallelogram linkage) OPT 555 Oscillating adapter Three hydraulic lines are required: pressure, return, and drain/oil leakage. Option: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a very large selection of various Seppi M. products, all available immediately! Mr. Herden (phone) will be happy to assist you. We can also provide you with a financing offer upon request. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telescopic handlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Errors and prior sale excepted. = Further information = Please contact Marius Herden for more information.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 1 h, working width: 4,800 mm, color: green, empty load weight: 3,000 kg, operation weight: 3,000 kg, machine/vehicle number: S241480, Equipment: hydraulic folding, lighting, Spearhead Multicut 480 Military Demo machine, year of manufacture 2024 Machine designed for grassland maintenance. However, it can also be used on other surfaces, such as fallow land, maize and rapeseed stubble, etc. Extra heavy-duty military specification. Required power – depending on crop density – ranges between 100 and 200 hp (73 – 147 kW). The Power Drive transmission system is rated for continuous power of up to 225 hp (165 kW). The combination of the unique cutting system with MultiCut blades and rotor ensures a very clean cut and optimal distribution of the cut material. MODEL: MULTICUT 480 Military Working width: 4.60 m Transport width: 2.80 m Length: 4.50 m Minimum power requirement: 100 hp (73 kW) Drive system: Power Drive Maximum load: 225 hp (165 kW) Capacity: 3-6 ha/h Number of rotors/blades: 3/18 MultiCut Slip clutch: 3 units, four-disc clutches Kwjdpfx Asx R Uuwsgzsu Blade speed: approx. 80 m/sec Rotor overlap: 150 mm Operating angle: +90° / -20° Cutting height range: 25-400 mm Wheels: 8 units, 6.00 x 9 Support skids: 4 units Number of supporting discs: 3 units Parallel height adjustment: standard Deck protection ring/guide plate: standard Lighting: standard Tandem axle centre section: standard GAS SPRUNG FOR TRANSPORT 7-YEAR WARRANTY ON TRANSMISSION

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Kedpjxlf N Sjfx Agzjwu Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.