Ekolider Sp.zo.o.

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 618 cm³, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Itjlhsya D Epscdwysb Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: good (used), Year of construction: 2008, clamping force: 2,000 kN, screw diameter: 50 mm, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 580 mm Distance between tie bars H: 580 mm Type: Horizontal Iteljyark Tehcdwyob Drive: Hydraulic

Condition: good (used), Year of construction: 2010, clamping force: 1,600 kN, Equipment: documentation/manual, Clamping force: 160 t Islhcoyarfdedwyotb Screw diameter: 40 mm Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2009, Screw diameter: 56 mm Type: Horizontal Ijlhcsyaqmtodwyotb Drive: Electric

Condition: excellent (used), Year of construction: 2008, clamping force: 1,300 kN, screw diameter: 55 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, injection weight: 479 g, mold height (min.): 300 mm, Clamping force: 130t Year of manufacture: 2008 Injection weight: 475.9g Injection unit 1000 Screw diameter: 55 mm Specific injection pressure: 1904 bar Injection volume: 523 ccm Injection weight: 475.9 g Clamping force: 130 t Tool plate dimensions: 745 x 745 mm Distance between tie bars: 470 x 470 mm Ejector force: 22.6 kN Mould height: 300 mm Opening stroke: 600 mm Maximum platen distance: 900 mm Weight: 8000 kg Year of manufacture: 2008 Iolheyagvwecdwyetb Control system: MC5 Equipment: - Accumulator - Euromap 67 interface - 2 x pneumatic valves - Hydraulic core on moving platen

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Itolhjyab R Necdwyob Robot WITTMANN W818-2558 (2013)

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 2007057201, Ser. No.: 2.000.102 Islhoyabfgjcdwyotb Absolute cycle counter: C120 = 048433176 Operating pressure (bar): 210 Injection force (kN): 693 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75

Condition: good (used), Year of construction: 2012, Clamping force: 160 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Itelhcdwsx U Avkjyeb

Condition: good (used), Year of construction: 2008, clamping force: 1,700 kN, Equipment: documentation/manual, Clamping force: 170 t Screw diameter: 45 mm Distance between tie bars V: 520 mm Distance between tie bars H: 520 mm Type: Horizontal Itelhjx Ury Escdwyjb Drive: Hydraulic

Condition: excellent (used), Year of construction: 2012, clamping force: 1,000 kN, Equipment: documentation/manual, Fanuc S2000 i 100B (2012) nr. 23 Clamping force: 100 t Screw diameter: 40 mm Itjlhcdwox Uqryeysb Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Type: Horizontal Drive: Electric Hours: 32426

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Itslhcex Uqb Ijdwysb Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), Year of construction: 2012, clamping force: 160 kN, Clamping force: 160 t Screw diameter: 45 mm Ioljx Up T Nohcdwyotb Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2014, ARBURG A 1500 T 1600-400 rotary table (29.279 h) (S&P 3786) Manufacture year: 2014 Operating hours: 29,379 Stunden Screw: 35 mm Injection pressure: 2500 bar Stroke volume: 154 cm³ Clamping Force: 150 t Ijlhcdwex Upzyjystb Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4600 x 1900 x 2300 mm Eeight: 11000 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 4 x Corepuller, Airvalve, Interface Colorizing, Interface Robot etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36.061 h) incl. KUKA Robot (S&P 3788) Manufacture year: 2008 Operating hours: 36,061 Stunden Screw: 40 HVF mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Itjlhsx Upztjcdwyob Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 5100 x 1600 x 2700 mm Eeight: 7250 kg Connected load: 60 kW Accumulator, 4 x Corepuller, Robot Interface EM67, Airvalve, incl. KUKA Robot System KR 5 arc, Convejorbelt, Safety Gate etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2004, clamping force: 1,250 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 275 cm³, injection pressure: 1,878 bar, injection weight: 250 g, mold height (min.): 300 mm, Krauss Maffei 125-520 C2 General Information Model: 125-520 C2 Year of manufacture: 2004 Control system: MC4 Machine weight: 6,000 kg Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m Clamping Unit Clamping force: 125 t Clamping system: 125 / … Platen size: 745 × 770 mm Tie bar spacing: 470 × 470 mm Opening stroke: 600 mm Max. platen distance: 900 mm Mold height: 300 mm Ejector force: 22 kN Ejector stroke: 150 mm Injection Unit Injection unit: … / 520 Ijlhjx Uputecdwyjtb Screw diameter: 45 mm Screw L/D ratio: 20 Shot volume: 275 ccm Shot weight: 250 g Specific injection pressure: 1,878 bar

Condition: used, Year of construction: 2004, 3 x Netstal injection moulding machines Itslhcdjx Tracowyjb Netstal SynErgy 1750-460 injection moulding machine, year 2004 Netstal Synergy 2400 injection moulding machine, year 2004 Netstal Synergy 1500K injection moulding machine, year 2005 More technical data and images available upon request.

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Itolhex Thzpscdwysb Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 The machine is in very good technical condition, fully operational and ready for immediate use in an industrial facility. The clamping force was factory-upgraded by Arburg to 3600 kN; the machine has received factory servicing. Clamping unit Clamping force: 3,600 kN Platen dimensions (H × W): 1,040 × 1,040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum mould height: 300 mm Maximum daylight opening: 1,400 mm Injection unit Screw diameter: 70 mm Shot volume: 1,078 cm³ Shot weight: 984 g Injection pressure: 2,000 bar Electrical–hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Itelhcdex Thw Rewyeb Dimensions and weight Net weight with control cabinet: 17 t

Condition: used, Year of construction: 2006, operating hours: 64,000 h, functionality: fully functional, machine/vehicle number: 200084, clamping force: 2,200 kN, screw diameter: 55 mm, clearance between the columns: 570 mm, displacement volume: 474 cm³, injection weight: 434 g, mold height (min.): 400 mm, opening stroke: 1,050 mm, overall weight: 8,500 kg, heating capacity: 14.9 kW (20.26 HP), pump power: 45,100 W, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: documentation/manual, CS series - LCD color screen - Selogica control system - Technology level 2 servo-driven with 2 variable displacement pumps - High wear-resistant plasticizing unit - Electric and hydraulic control of NVD in the mold for the 1st injection unit - Minimum installation height extended to 400 mm - Connection for air blow-off unit 1 - Core pull 1 - Core pull 2 Iolhcdsx Td Apjwyotb - Injection pressure increased by 10% - HHG interface according to EUROMAP 67, 50-pin - Extended robot interface (EUROMAP 12 and 67) - Temperature control unit interface - Serial printer interface V24 - PC keyboard interface - Post-pressure switching channel 1 on the moving mold platen - Interface for color separation units - 6 manually adjustable free cooling circuits - Arburg equipment package 1,2,3,5,6,7 - Injection control - Ejector plate locking connection - Centering diameter 175 mm through the moving clamping plate Completely overhauled by Makutec in 2020. In operation until CW2/2026.

Condition: excellent (used), Year of construction: 2015, Demag Systec 100/420-310 (2015) Panel: NC5 Clamping force: 100 t Ielhcdox Tdwyjwyetb Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Possible to buy Wittmann W818 Linear robot Z= 1500mm

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Itjlhcdsx Tdp Newysb Screw diameter: 30 mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), clamping force: 1,300 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, injection weight: 289 g, mold height (min.): 300 mm, General Data Model: Krauss Maffei KM 130/750 CX Year of manufacture: 2011 Control system: MC5 Machine weight: 6,200 kg Ielhcex S Hipedwyetb Dimensions (L × W × H): 4.5 × 1.5 × 2.2 m ⚙️ Injection Unit Unit: .../750 Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 289.4 g Specific injection pressure: 2,336 bar Screw L/D ratio: 22.4 🔩 Clamping Unit Clamping unit: 130/... Clamping force: 130 t Platen dimensions: 745 × 770 mm Tie bar spacing: 470 × 470 mm Mould height (min.): 300 mm Opening stroke: 600 mm Max. daylight: 900 mm Ejector force: 22.6 kN Ejector stroke: 150 mm 🧰 Additional Equipment - Hydraulic core - Pneumatic valve 4-section rotameters (2 pcs.)

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Ijlhox Szwhjcdwyjtb Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: used, Demag Ergotech 3300-840, Demag injection molding machine, used machine Manufacturer : Demag, Sumitomo Model: Ergotech 3300-840 Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters Itelhcsx Sqi Hsdwyob Net weight (without oil): 13 800 kg TECHNICAL DATA (BY SCREW DIAMETER) ----- Description Unit "A" "B" "C" ----- Screw diameter: [mm] 45 50 60 L/D ratio: [-] 20 20 20 Injection pressure (at 400 °C): [bar] 2402 1946 1351 Shot volume: [cm3] 358 442 636 Shot weight (PS): [g] 320 400 570 Barrel heating power: [kW] 13.0 14.8 23.1 Installed electrical power*: [kW] 58/68 60/70 68/78 ----- * Note: Values are higher with electric screw drive (WA). INJECTION UNIT FEATURES ----- Max. dosing stroke: 225 mm Max. nozzle retraction: 470 mm Nozzle immersion depth: 40 mm (SVO) / 30 mm (SPI) Nozzle contact force: 80 kN Electric screw drive (WA): 20.5 kW Material hopper capacity: 75 liters GENERAL AND HYDRAULIC DATA ----- Hydraulic oil tank capacity: 700 liters Pump unit power: 45 / 55 kW Dry cycle (EUROMAP 6a): 1440 / 1600 h-1 Dry cycle (without nozzle movement): 1890 / 2100 h-1 Continuous noise level: 74 dB (A)

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive Itelhox Rx Eyscdwyob rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG