LK Metrology GmbH

Condition: good (used), Year of construction: 2022, Description: The machine is in good technical condition, and testing can be arranged by prior agreement. Along with the machine, stocks of measuring probes, clamping plates, and connecting elements can also be sold. Caedjx A U Sdepfx Ab Tja

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 065014, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Measuring range X/Y/Z: 800 / 1000 / 700 mm Max. length measurement deviation: MPEe = 2.7 + L/300 µm Probe head: PH10M, Renishaw TP200 Accessories: HT400 control unit, reference sphere, 18-piece set of styli/extensions, rack for stylus change Software: Quartis R2025-2, including additional modules Quartis Surf and Curve for measuring surfaces and curves, without PC Last maintenance: 12/2021, acceptance report available in documents Very good condition, fully functional, documentation available Caedpfxsx Au Hne Ab Tja Inspection at the facility is possible Sale without warranty, including transport packaging and loading, available from March 2026

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1156810C, Mitutoyo BRT-A910 CMM (1998) Renishaw Probe CMM Software not included in scope of supply. Codpfx Ajx Ap Ndsb Tsaa Sub Location Building 6

Condition: used, Mitutoyo BHN 706 Co-ordinate Measuring Machine with Aberlink 3D Software, Deva Pendant Control, Servo Amplifier, Renishaw PH10T Plus Probe Head, PHC 10-3 Plus Controller, Granite Bed Area 1520mm x 940mm Between Columns including Probes & Clamping. S/No. N92090058 - 9005105102 Cedex Ahcpspfx Ab Teaa Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1995, DEA Scirocco - 201310 Slant Bridge Technology Co-ordinate Measuring Machine with LK Metrology Camio CMM Software, Granite Bed Size 2880mm Long, 1360mm Between Column, 11+I2:I1350mm Under Z Axis Carriage, Renishaw PH10MQ Probe Head with Probes LK Joystick Operation. S/No. 00076 (1995) Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Codpex Ag T Hefx Ab Teaa

Condition: excellent (used), Year of construction: 2015, 3D CNC image processing measuring machine with touch-trigger probe Measuring range (X × Y × Z): 300 x 200 x 200 mm Scale resolution: 0.1 µm Max. table load: 20 kg Image measurement accuracy: EUX,MPE/EUY,MPE = (1.5+3L/1000) µm EUZ,MPE = (1.5+4L/1000) µm EUXY,MPE = (2+4L/1000) µm L: measuring length in mm Optics: programmable zoom changer 1x-2x-6x Illumination: Transmitted light: white LED Coaxial light: white LED PRL: white LED Cjdpoxztl Tsfx Ab Toaa

Condition: like new (used), Year of construction: 2019, Type: QV AKTIVE 202 Model: QV-L202Z1L-D Range (X, Y, Z axis) with Vision Head: 250 x 200 x 150 mm Max. table load: 10 kg Resolution: 0.1 μm Illumination: (White LED) • Contour • Coaxial • 4-quadrant ring light Magnification system: Zoom optical system with 8 positions, standard 1.5X magnification lens Sensor type: High-resolution CMOS color camera Additional lenses: 1X and 2X magnification Accuracy: E1 (x, y) = (2+0.3 L/100) μm E1(z) = (3+0.5 L/100) μm Csdexztgkspfx Ab Teaa E2 (XY) = (2.5+0.4 L/100) μm L = measured length (mm)

Condition: refurbished (used), functionality: fully functional, Used machine retrofitted with new CNC-controller and new 3D-geometry-software The equipment of the measuring machine is freely selectable. We procure the right components from the customer "just in time". Caodpfx Ajxzp U Djb Tja Machine will be modernized with new controller, probe head, probes from Renishaw, PC and 3D software RationalDMIS. Technical Data: Measuring Range apprx: X = 1.000 mm - Y = 1.200 mm - Z = 600 mm Accurracy: MPEE : 1.9+L/300 according the manufacturers specification Illustrations still with original probe configuration Price on request >>> single machine - as long as available

Condition: new, Year of construction: 2025, CNC measuring machine HEXAGON Global S 07.10.05, year of manufacture 2025, in original packaging, travel distances X 700 mm, Y 1000 mm, Z 500 mm, equipped with motorized swiveling measuring head HH-AS8-T5, automatic TKJ 5°, HP-S-X1H scanning probe, probe change module with 10 positions, software: PC-DMIS CAD++, weight 1,450 kg. Codpfx Aboxy T Sqe Toaa

Condition: ready for operation (used), Year of construction: 2019, Accuracy: Standard, measuring range X/Y/Z: 900mm/1600mm/800mm, travel speed: 300mm/s, table dimensions X/Y: 1080mm/2320mm, max. workpiece height: 1000mm, max. workpiece weight: 1500kg. Machine dimensions X/Y/Z: approx. 1700mm/2750mm/3150mm, weight: approx. 2900kg. Documentation available. A visit on site is possible. Casdpfxexy R Ehj Ab Tja

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 1193, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,549 kg, repeat accuracy: 0.003 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to collecting the item by 16/01/2026! TECHNICAL DETAILS Maximum permissible workpiece weight: 25,000 N Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,000 mm Measuring resolution: 0.001 mm Straightness of guideways Straightness X-axis max.: 0.010 mm Straightness Y-axis max.: 0.010 mm Straightness Z-axis max.: 0.010 mm Repeatability: 0.003 mm Travel speed: stepless, 4.2 m/min Caedpfx Abexy Rtro Tea MACHINE DETAILS Dimensions & weight Space requirement (L x W x H): 3,600 x 3,600 x 4,500 mm External dimensions (L x W x H): 2,590 x 2,280 x 4,080 mm Machine weight: 8.5 t

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 4,000 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, Hexagon Mercury DCC C1 Mfg date: 4/2014 Model: 40.16.21 Working area: 4000x1600x2100 mm System: B3CLC Head: TesaStar-m Casdpfoxy Iz Hex Ab Tea Sensor: TP20 Safely dismantled and prepared for transport directly by Hexagon Metrology.

Condition: good (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 2,500 mm, year of last overhaul: 2024, Equipment: documentation/manual, The ROMER Absolute Arm is a multi-jointed 3D coordinate measuring device. It is constructed from high-quality, temperature-stable carbon fiber. Caedpfxjxyw Rdo Ab Tsa This is a 7-axis measuring arm with a measuring volume of 2500 mm. We are happy to provide the required software and training as well. The last recertification was in 2024. Recertification to current standards is available for an additional fee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 25 kg, total height: 700 mm, total width: 570 mm, total length: 500 mm, overall weight: 25 kg, table width: 305 mm, table length: 305 mm, table load: 25 kg, ambient temperature (max.): 50 °C, ambient temperature (min.): 5 °C, maximum load weight: 25 kg, Equipment: documentation/manual, type plate available, Renishaw Equator 300 Versatile Gauge Machine Type: Co-Ordinate Measuring Machine/Versatile Gauge Year: 2020 Condition: Excellent Condition Includes Equator Shopfloor Controller Kit Equator SM25-2U Probe Kit Equator Joystick Kit Equator Power Cable UK Modus Equator Equator Enclosure Kit Equator Gauge Checker Kit M6 EQ33 Modular Fixture Plate x 2 SH25-2A Stylus Holder x 3 Styli x 2 IPC Dongle with one Licence Technical Specification Cedpfexyungjx Ab Teaa Working Volume X & Y: Ø300 mm Working Volume Z: 150mm Working Volume Height from Base: 55mm Machine Weight: 25kg Dimensions(without enclosure): 570 x 500 x 700mm Comparison uncertainty*: ±0.002 mm Probe type - scanning: Renishaw 3-axis SP25 analogue scanning Maximum scanning speed: (SP25) 200 mm/s Scanning rate (SP25): 1000 points/s Probe type - touch-trigger: Renishaw 3-axis TP20 kinematic touch-trigger Recommended touch speed (TP20): 10 mm/s Maximum movement speed: 500 mm/s Scale resolution: 0.0002 mm Fixturing requirement*: ±1 mm Machine air supply requirement: No air required Operating temperature: +5 °C to +50 °C Storage temperature: -25 °C to +70 °C Relative humidity operating range: Maximum 80 %RH at 40 °C, non condensing Machine electrical supply requirements: 100-240 V AC ±10 %, 50-60 Hz Maximum power consumption: 190 W Typical power consumption: 80-100 W Fixture plate: 305 mm × 305 mm aluminium Maximum workpiece weight: 25 kg Notes * The process of measuring on an Equator involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on Equator, ‘mastering’, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the masterpart. This specification applies where each part is fixtured to within 1 mm relative to the master part. Peak consumption at power up. 3-axis system typical consumption based on taking touch points under DCC control.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, Hexagon RC1 electronic control unit, in perfect condition, from 2018 with very few operating hours. Supplied as a bundle with the corresponding computer with PCDmis CAD version 2018. Excellent for retrofitting DEA and Hexagon machines such as Mistral and Global. This control unit was previously used with a DEA Iota and LIDA 140 scales. Csdpfxoxyqn No Ab Tjaa

Condition: good (used), functionality: fully functional, For sale is a Zeiss measuring machine including accessories. TYPE C100 413508 Serial number: 574203951 Last calibration: 22.06.2021 Weight: 375 kg Measuring plate dimensions: L2 m x W1.10 m x H0.7 m Dimensions with measuring stand: W1.50 m x H2.60 m Codpfxoxyhhmj Ab Teaa Inspection possible by appointment in 71139 Ehningen.

Condition: used, Year of construction: 2012, with PC, software (the software does not require an additional dongle, it is installed on the PC), including various measuring probes. Important: The handling/dismantling service includes professional transport locking with original Mitutoyo parts by Mitutoyo technicians, securing of sensitive parts (e.g. with bubble wrap), and loading onto truck. Cajdsxxwbgspfx Ab Tea

Condition: used, Year of construction: 2005, with PC, software & dongle; includes various measuring probes. Important: The handling/dismantling service includes professional transport locking using original Mitutoyo parts by Mitutoyo technicians, securing of sensitive parts, e.g. with bubble wrap, and loading onto a truck. Cajdpoxxv Hnsfx Ab Toa

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202539, Technical characteristics: 📏 Measuring Range & Dimensions Caodpfexxvldox Ab Tsa X-axis: 900 mm Y-axis: 1200 mm Z-axis: 700 mm Max. workpiece weight: ~1,300 kg Machine footprint: ~2,040 × 1,495 mm Height: ~3,030 mm Table height: 850 mm 🧠 Accuracy & Performance Length measurement error (MPE): Standard: 1.5 + L/350 µm Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Scanning speed: Up to 500 points/sec Acceleration: Up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Stylus length: Up to 800 mm Stylus weight: Max. 600 g Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) 🌡️ Environmental Conditions Operating temperature: 15–30 °C Accuracy guaranteed: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Machine status: WORKING

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202308, Technical characteristics: 📏 Measuring Range & Dimensions X-axis: 900 mm Y-axis: 1200 mm Z-axis: 700 mm Max. workpiece weight: approx. 1,300 kg Machine footprint: approx. 2,040 × 1,495 mm Height: approx. 3,030 mm Table height: 850 mm 🧠 Accuracy & Performance Length measurement error (MPE): - Standard: 1.5 + L/350 µm - Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Scanning speed: up to 500 points/sec Acceleration: up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Stylus length: up to 800 mm Stylus weight: max. 600 g Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) 🌡️ Environmental Conditions Operating temperature: 15–30 °C Guaranteed accuracy: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system Codpfx Aboxxvkyo Tjaa ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Machine status: WORKING

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Description: Year of manuf. : 2024 Control : Sonstige Casdpfjxv Nkuox Ab Toa In General: Year of manufacture:2024 Traverse path X/Y/Z:800/ 1,500/700 mm Maximum table load:800 kg Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Touch probe:Renishaw PH 10M Plus

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: SN 102687, The Zeiss UMC 850 coordinate measuring machine shown in the pictures is for sale in working condition. Please feel free to contact us if you have any questions. Caedpsxvzzfefx Ab Tja

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm Caedpfoxvyygex Ab Tja High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: ready for operation (used), Year of construction: 2016, measuring range X-axis: 650 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 3,000 kg, path measurement accuracy: 2 mm, total height: 2,918 mm, type of input current: AC, total width: 1,402 mm, total length: 1,920 mm, Manufacturer Name Brown & Sharpe Model Xcel 7-107 Year 2016 Serial Number UA1091114 CE Marked YES Controller Hexagon operator controller Software Included Certificate of calibration January 2021 Location NC, USA Level of Removal Uncrated / Loose Recommended Packaging Form Custom pallet Caodpfexvp Ruex Ab Tja Overall Dimensions (W x L x H) 1320.80 x 1905.00 x 3302.00 mm (52 x 75 x 130 IN) Overall Weight 2268.00 kg (5000 LBS)

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1189, total height: 1,800 mm, total width: 700 mm, total length: 1,200 mm, table diameter: 320 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 04/12/2025! Placing a bid obligates timely collection between 10/12/2025 and 12/12/2025! The machine can be inspected on 25/11/2025! TECHNICAL DETAILS Table diameter: 320 mm MACHINE DETAILS Csdpfx Asxvb Ewob Teaa Electrical data Frequency: 50/60 Hz Rated current: 10 A Dimensions (L x W x H): 1,200 x 700 x 1,800 mm