Bauunternehmen Bega

Year of construction: 1999, condition: ready for operation (used), A lead and feed screw lathe Stanko with a 2-axis digital display Heidenhain is available. Distance between centers: 750mm, center height: 200mm, turning diameter over bed/support: 400mm/220mm, spindle bore: 45mm, spindle taper: MK6, speed: 2000rpm, chuck diameter: 200mm, tool positions: 4. Machine dimensions X/Y/Z: approx. 2300mm/1150mm/1550mm, weight: approx. 2100kg, control: 2-axis digital display Heidenhain. Including machine feet, digital display, and 2–3 tool holders. Documentation available. An on-site inspection is possible. Hjdpfxjxn S T Ao Afionu

Year of construction: 2023, condition: used, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Hodpfxsxnakve Afionu

Year of construction: 2018, condition: used, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Hnjdpoxnagksfx Afiju

Year of construction: 2018, condition: used, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Hjdpoxnagqsfx Afionu

Year of construction: 2022, condition: used, Travel distances (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, BENZINGER control, KNOLL 320 S-1/225 chip conveyor, No.: 2197973, HYDAC cooling unit, DSL Sigmatec 15 compressed air filter unit, 1 side table Hnjdjxnagwspfx Afiju

Year of construction: 2019, condition: used, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Hodpfsxnag Dox Afijnu

Year of construction: 2023, condition: used, 12-position tool changer, spindle diameter: approx. 26 mm, maximum spindle speed: approx. 8,000 rpm, maximum workpiece diameter: approx. 60 mm, maximum workpiece length: approx. 120 mm, tool holder: VDI 25, SIEMENS One control system, net weight: approx. 4,200 kg, 6-axis articulated arm robot EGS AUTOMATION YR-1-06VXH12-A00, year of construction: 2022, maximum payload: approx. 12 kg, net weight: approx. 150 kg, serial number: 6V2242171720001, mounted on steel base, YASKAWA ERAS-1000-06VXH25-E10 controller, with loading and unloading station METEK/EGS AUTOMATION MSM-AUTOMATION BENZINGER, year of construction: 2023, serial number: 220452-5, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2023, serial number: 1610559, hydraulic power unit with cooling KNOLL/BKW TG30-04/07, year of construction: 2023, serial number: 1629016, BKW ET22V-134-B-DI, year of construction: 2023, serial number: 836245, 1 cooling unit HYDAC RFCS-AH030/1.0, year of construction: 2022, serial number: 3679699, compressed air unit DSL 02D-SF-GORING 2-MBL, maximum air flow: approx. 900 cbm/h, with safety enclosure defective due to vandalism (components have been removed from the control cabinet) Hnsdpfxjxnah Ie Afiju

Year of construction: 2022, condition: used, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Hnedpfx Afjxnaifoiju

Year of construction: 2023, condition: used, Max. turning diameter: approx. 300 mm, max. spindle speed: approx. 6,000 rpm, power: approx. 26 kW, max. workpiece weight: approx. 300 kg, travel ranges: Z-axis: approx. 350 mm, X-axis: approx. 90 mm, control: SIEMENS Sinumerik 840 D SL, 1 chip conveyor BÄR & CO. GF25L42L-P63, year of manufacture: 2017, serial no.: 61170009, air filter unit IFS M 1600, year of manufacture: 2015, serial no.: 544070-1, net weight: approx. 85 kg, connected load: 400/460 V, 50/60 Hz, 0.75 kW, 1.7/1.5 A, 1 coolant filter unit BÄR & CO. SF 51, year of manufacture: 2018, serial no.: 61180006, cooling unit RKV 4.3 K, year of manufacture: 2018, serial no.: 3-36613, connected load: 400 V/50 Hz, permissible operating pressure: approx. 28 bar, tank capacity: approx. 90 l, cooling medium: water, 1 two-door steel cabinet, contents: various machine tools and consumables Hnodexnakiepfx Afisu

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Hnodpfx Afoxmkcaeiou

Condition: good (used), Tosch lathe Hnedpfexmic Eex Afiou

Year of construction: 1988, condition: good (used), TOS SN 50 B (1988) Manufacturer: TOS Model: SN 50 B Hnodpsxl Tt Ssfx Afiju Year of manufacture: 1988 Type: Universal centre lathe Swing over bed: 500 mm Swing over cross slide: 270 mm Swing in gap: 700 mm Distance between centres: 1500 mm Bed width: 300 mm Spindle bore: 52 mm Spindle speed range: 22 – 2000 rpm Spindle nose: Camlock D1-6 Spindle motor power: 7.5 kW Longitudinal feed range: 0.04 – 2.24 mm/rev Cross feed range: 0.02 – 1.12 mm/rev Metric threads: 0.5 – 224 mm Inch threads: 56 – 0.25 TPI Module threads: 0.25 – 112 mm DP threads: 112 – 0.25 DP Tailstock quill diameter: 75 mm Tailstock quill travel: 160 mm Tailstock taper: Morse 5 Machine length: approx. 2800 mm Machine width: approx. 1100 mm Machine height: approx. 1300 mm Machine weight: approx. 2000 kg

Condition: ready for operation (used), Swing diameter over bed/cross slide/offset: 630mm/340mm/700mm, center height: 290mm, distance between centers: 1500mm, speed: 1120rpm, machine dimensions X/Y/Z: approx. 3600mm/1500mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible. Hnodpjxliufofx Afiou

Year of construction: 2004, condition: good (used), We are offering a Doosan Puma 2000 LSY with bar feeder: - Year 2004, 9,400 operating hours - Fanuc 18i-TB - LNS Servo 2 bar feeder - Tool measurement system - Chip conveyor - 12 tool stations Hodpfoxk Uz Isx Afienu - x, y, x, b = 250, ±50, 830, 830 Under power

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Hnjdpfxjxf Uwxs Afiou Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: excellent (used), functionality: fully functional, Diameter: 700mm Spindle hole: 250mm Hnsdpfx Aexf Uhwefisu Turning length: 3000mm

Year of construction: 2006, condition: ready for operation (used), A Mazak CNC 5-axis turning and milling center with counter spindle is available. Swing diameter: 820mm, machining diameter: 820mm, machining length: 1500mm, max. workpiece weight in chuck/between centers: 650kg/150kg, main spindle speed: 1600rpm, spindle bore: 185mm, power: 30kW/40kW, tailstock force: 15kN, quill stroke: 1466mm, tool holder: BT50, spindle speed: 10000rpm, travel X/Y/Z: 870mm/500mm/1600mm, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3200mm, weight: approx. 26000kg, control: Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Hjdpfx Afexf Ikloienu

Year of construction: 1991, condition: ready for operation (used), Travel X/Z: 650mm/181.5mm, max. swing diameter over bed: 350mm, max. machining diameter: 230mm, turning length: 600mm, spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 4000rpm, feed: 15m/min, rapid traverse: 15m/min, tool holder: VDI30, tool positions: 12, tailstock taper: SK30, quill stroke: 40mm, weight: approx. 4500kg, control: Siemens Sinumerik 3T. Includes hinged belt chip conveyor. Documentation available. An on-site inspection is possible. Expected to be available from the end of October 2025. Hjdoxd Au Njpfx Afisnu

Condition: new, overall weight: 1,150 kg, total height: 1,320 mm, total width: 850 mm, total length: 1,940 mm, Distance between centers 1000 mm Max. swing over bed 410 mm Hnedpfx Aoxd Atxsfieu Max. swing over carriage 255 mm Max. swing in gap 580 mm spindle bore 52 mm Spindle Taper Camlock D1-6 Spindle speed 1: 30 -550 1/min Spindle speed 2: 550 - 3000 1/min Travel cross slide 225 mm Travel top slide 100 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 1990, condition: used, Cazeneuve HBX360 lathe Hjdpfx Afexdnpxjijnu

Year of construction: 2018, condition: ready for operation (used), A Pittler PV4000 CNC large-format vertical lathe is available. Swing diameter: 3800mm, max. workpiece weight: 35000kg, turning diameter: 3800mm, travel X/Z: 2x3200mm/1000mm, rapid traverse X/Z: 32m/20m/min, feed force X/Z: 22kN. Spindle flange diameter: 1900mm, face bearing diameter: 1400mm, spindle diameter: not specified, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 150l/min, water tank volume: 1550l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 3500/3/6/12, outer diameter: 3500mm, height: 500mm, jaw stroke: 55mm, compensation per jaw: +/-6mm, piston stroke: 120mm, max. operating pressure: 60bar, max. total clamping force: 200kN, max. speed: 100rpm, jaw width: 70mm, max. weight: 30000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 150000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF150/1550 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible. Hnodpfx Afexc Nkzoieu

Year of construction: 2021, condition: ready for operation (used), A Pittler CNC large-format vertical lathe is available. Swing diameter: 3000mm, max. workpiece weight: 25000kg, turning diameter: 2800mm, travel X/Y: 2x2700mm/2x1000mm, rapid traverse X/Z: 40m/24m/min, feed force X/Z: 22kN. Spindle flange diameter: 1100mm, face bearing diameter: 800mm, spindle diameter: 360mm, tool positions: 25/41, max. tool diameter: 150mm, max. tool weight: 20kg, max. tool length: 400mm. Pump pressure: 70bar, filtration capacity: 400l/min, water tank volume: 2250l, air capacity: 4000m³/h, extraction nozzle diameter: 350mm. Röhm chuck KFG 2500/3/6/12, outer diameter: 2500mm, height: 400mm, jaw stroke: 50mm, compensation per jaw: +/-6mm, piston stroke: 87.5mm, max. operating pressure: 80bar, max. total clamping force: 182kN, max. speed: 170rpm, jaw width: 70mm, max. weight: 10000kg. Overall system dimensions X/Y/Z: approx. 11400mm/5300mm/5000mm, total weight: approx. 140000kg, control: Siemens Sinumerik 840D sl. Includes Knoll chip conveyor, Knoll KF400/2250 paper band filter, Friess type 1U oil skimmer with tank, and UAS Smog Hog SH-M20 air cleaner. Documentation available. An on-site inspection is possible. Hjdpfoxc Nkusx Afisnu

Condition: ready for operation (used), A conventional center lathe is available. An on-site inspection is possible. Hnodpsxcx Ayefx Afiou

Condition: ready for operation (used), YEAR OF MANUFACTURE: 1963 (see attached documents for technical data) Swing diameter: 600 mm Turning length: 1000 mm Hnodpsxcw Axjfx Afisu Equipment: - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Tailstock center - Quick-change drill chuck MK5 - Documentation

Condition: ready for operation (used), Type: TNO FAB 12-24" Draagbare machine, ideaal voor het snijden en afschuiven van dikke wandbuizen Elektrisch aangedreven Uitrusting met hydraulische aandrijving voor automatische klemming Automatisch oplopende toevoersysteem De buis wordt van buitenaf vastgeklemd en de snijgereedschappen draaien rond de buis Klembereik: 304,8 610 mm Slag van de gereedschapshouder: 100 mm Bruikbare voeding van snij-/afschuingereedschapsbits: 60 mm Voeding van klemcilinders: 100 mm Gewicht: 1200 kg Hsdpfx Aexcqkijfienu machine voor het couperen en frezen van buizen