FORNAX 2002 Kft.

Condition: used, Year of construction: 2006, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2006 Control : Siemens 840D - Powerline Turning diam. : 140 mm Turning length : 480 mm Mainspindle: Technology:Belt-driven spindle Speed:6.300 rpm Power (max.):10 kW Torque (max.):78 Nm C-Axis:0,001° Barcapacity:45 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axfix Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:7.000 rpm Power (max.):10 kW Torque (max.):45 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Röhm KFD-HS 130-3 Kdjdpfx Aho Aa Hm Esbsu Movement in Z:510 mm Rapid travers in Z:24 m/min Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X/Z:160/510 mm Rapid travers in X/Z:20/24 m/min Toolcarrier II (X): Technology:Turret with 12 stations Taper:VDI25 Tooldrive:6.000 rpm, 7,5 kW, 12 Nm Movement in X:140 mm Rapid travers in X:20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling pumps with Highpressure, 14 bar Raw materialfeed:Bar loader, EMCO Top Load 8-45 Finishpart removal:Part catcher with conveyor belt Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder

Condition: used, control MAZATROL CAM T-2 Max. swing diameter 440 mm Standard machining diameter 150 mm max. workpiece length 507 mm x-axis 155 mm z-axis 540 mm spindle tunring speed 10 - 2.600 U/min Kdedpfx Ahj Aa A Rysbeu Drive power (30 min) 7,5 kW Drive power (continuous operation) 5,5 kW spindle bore 56 mm spindle taper A2-6 number of tool places 8 Pos. Tool size 20 x 20 x 150 mm dimensions 2.550 x 1.440 x 1.720 mm weight approx. 2.800 kg Condition: used The machine does not have a chip conveyor! Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Technical data and specifications are subject to change and errors; subject to prior sale!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. Kdodpfx Ao Aa Aufjhbju - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, number of axes: 2, Horizontal turning machine manufactured in 2000. This GILDEMEISTER NEF 320 features a robust control system by HEIDENHAIN. If you are looking to get high-quality turning capabilities, consider the GILDEMEISTER NEF 320 machine we have for sale. Contact us for further details. Kdjdps Aaza Tjfx Ahbeu - Spindle Speed Range: approx. 16 - 4000 rpm - Dimensions (L x W x H): approx. 2250 x 1450 x 1750 mm - Machine Weight: approx. 2200 - 2500 kg - Voltage (U): 400 V - Phase: 3 ~ - Frequency (f): 50 Hz - Power Rating (P): 14 kVA - Nominal Current (I): 20 A - Fuse Rating: 25 A - Control Voltage: 230 V~ / 24 V= - Control System: HEIDENHAIN - Optional (not included): Second jaw chuck, tools, quick-change tool post, tailstock, work lamp Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2002, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Machine Type: CNC short-stroke turning machine Manufacturer: Traub Model: TNK 36 Year of Manufacture: 2002 Loading Magazine Kods Aay Aaopfx Ahbjdu Manufacturer: FMB Model: TURBO 5-42XT/4200/C Year of Manufacture: 2002 EQUIPMENT Knoll chip conveyor Compact belt filter for high pressure Parts conveyor belt Holder Driven tools Collets Various material reducers for the loading magazine Accessories required for operation

Condition: used, Year of construction: 2002, turning diameter 190 mm turning length 120 mm control MSG-501 max. swing diameter 250 mm Distance between centers 750 mm bar passage 40 mm x-axis 135 mm z-axis 450 mm y-axis ±40 mm spindle tunring speed 6.000 U/min number of tool places 16 Pos. Number of working hours ca. 1.230 h The machine is from its first owner and has low operating hours. Ksdpfo Aaq Ugox Ahbodu It is very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Parts catcher and conveyor belt - High-pressure cooling - 16-station upper turret with Y-axis - Bar feeder interface - Hainbuch collets - Three-jaw chuck - Fixed and driven tool holders Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, - CNC controller: FANUC 0i-TF - 60° inclined bed - Cross slide with linear guides Kdjdpez Truiefx Ahbeu - Part separator - Coolant system - Chip conveyor - Operating hours: 2775 hours - Machining hours: 743 hours - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Ø/length of workpiece: 32 / 75 mm - X-axis travel: 300 mm - Y-axis travel: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Square tool holder: 12 x 12 mm Cooling system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40%: 3.7 / 4.4 kW - Torque: 20.2 Nm - Power consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions and weight: - Machine footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: used, Year of construction: 2000, functionality: fully functional, Colchester CNC lathe Model: Tornado T 110 Year: 2001 Turning length: 540 mm Turning diameter: 250 mm Distance between centers: 400 mm Spindle speed: 6000 rpm Spindle bore: 52 mm Number of tools in the turret: 12 pcs Kdedpfx Ahjz Tq Arebju Control system: FANUC 21i - TB Chuck – Tool holder – RS-232 C interface – Cooling system – Bar feeder 1m

Condition: ready for operation (used), Year of construction: 2020, operating hours: 2,350 h, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details. • C and Y axis • 102 mm spindle through-hole • Turning length: 1225 mm • Condition: Well maintained Ksdoz Tqzzepfx Ahbsdu Additional equipment • Spray gun • Hand wheel (MPG) • Tool setter Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2003, FOR SALE – LOT OF 8 MORI SEIKI CNC TURNING CENTERS Selling a single lot of 8 MORI SEIKI CNC turning centers, including: 8 MORI SEIKI CL-05 turning centers – year 2003. All machines are functional and complete, with their tools and tool holders. Chip conveyors included. Selling the entire lot only. Photos and further information available upon request. Kdodpfxez Tqp Ej Ahbsu Price for the lot available upon request.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 266 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: HEIDENHAIN, controller model: Plus 4110, number of axes: 2, Horizontal turning machine manufactured in 2003. This DMT Kern CD480 features a main drive power of 17 kW and a total power requirement of 25 kW. Including tool turret with 12 positions and various VDI30 holders. If you are looking to get high-quality turning capabilities, consider the DMT Kern CD480 machine we have for sale. Contact us for further details. - Control Unit Model: Heidenhain Manual Plus 4110 (Type: BFT 121 G / LE 412 M) - Voltage / Frequency: 400 V / 50 Hz - Nominal Current: 45 A - Control Voltage: 24 V DC - X-Axis Feed Motor: 4.0 Nm (3000 rpm) - Z-Axis Feed Motor: 6.0 Nm (3000 rpm) - X-Axis Software Limit: -30.50 mm to +235.0 mm - Z-Axis Software Limit: -115.0 mm to +982.0 mm - Operating System / Software: Win98 4.10.2222, IPLC 41HD467 Ksdpfx Ahsz Sp Rlebodu Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), WEISSER SÖHNE UNIVERTOR AC-2 Kedpfxez Sd D Ie Ahbjdu High-precision, twin-spindle vertical CNC turning center. Complete and fully ready for operation.

Condition: used, Year of construction: 2024, Machine has 0 cutting hours Main spindle machining capacity Max. machining diameter: ø16 mm Max. machining length without re-chucking: 200 mm Max. front drilling diameter: ø10 mm Max. front tapping diameter: M8 Main spindle through-hole: ø20 mm Main spindle speed: max. 12,000 rpm Back spindle Max. back spindle chucking diameter: ø16 mm Max. back drilling diameter: ø8 mm Max. back tapping diameter: M6 Back spindle speed: max. 12,000 rpm Kdodpoz R Szlefx Ahbeu Gang tool post (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Turret (rotary tools) Max. drilling diameter ø5 mm, max. tapping diameter M5 Spindle speed: max. 8,000 rpm Number of stations: 10 + α Tooling Number of mountable tools: up to 32 + α Turning tools on gang tool post: 5 × 16 mm Rotary tools on gang tool post: 5–7 Back tool post: 5 fixed tools Drill sleeve: ø19.05 mm Collet, main and back spindle: 138E Guide bush: F605 Feed rates Rapid traverse, all axes (except X2 and Y2): 32 m/min X2 axis: 16 m/min Y2 axis: 8 m/min Motors Main spindle motor: 2.2 / 3.7 kW Back spindle motor: 0.75 / 1.5 kW Rotary tool drives (gang tool post and turret): 0.69 kW Control and dimensions Control: Mitsubishi Meldas M730 Dimensions (W × D × H): 2,780 × 1,340 × 1,790 mm Weight: 2,900 kg Center height: 1,150 mm Option: LFV technology (Low Frequency Vibration) for chip breaking The machine comes with 5 driven tool holders and one holder for the turret. Note that the machine does not come with barfeeder.

Condition: good (used), CNC turning machine WEILER DZ42 CNC. Year of manufacture 2001, serial number 173, CNC Siemens 840C, machine weight approximately 3,800 kg, with bar feeder HATEC AM9. Kdsdez R R Htepfx Ahbeu

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Kodpez R R Eijfx Ahbodu

Condition: ready for operation (used), Year of construction: 2006, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, spindle motor power: 29,800 W, overall weight: 11,000 kg, number of axes: 3, This 3-axis HAAS SL-40HE CNC turning center was manufactured in 2006. It features a maximum spindle speed of 2,400 rpm, a swing diameter over bed of 1,016 mm, and a Z-axis travel of 1,118 mm. The machine is equipped with a full-featured C-axis and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the HAAS SL-40HE machine we have for sale. Contact us for further details. • Swing over bed: 1,016 mm • Swing over cross slide: 635 mm • Max. bar capacity: 101.6 mm • C-axis: Full-featured C-axis • Tool presetter: Yes • Spindle nose: A2-8 • Spindle bore: approx. 116.8 mm • Gearbox: 2-speed • Chuck: Kitagawa B-15, 3-jaw • Vector drive: 40/30 HP closed-loop vector drive • Electrical enclosure: NEMA Type 1 (indoor use only) • Voltage: 360/480 V • Phase: 3 • Frequency: 50/60 Hz • Full load: 40 A • Largest load: 70 A • Short-circuit interrupting capacity: 10,000 A • Machine status: Dismantled, not under power; seller can load on truck with crane for approx. €800 Kdsdpfx Ahjz Ryqmjbou Additional equipment • Iscar Fast Feed Tools tooling/solutions (as indicated by stickers) • Work light • Coolant tank and chip tray assembly • Foot pedal control • Status beacon light Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Counter Spindle No Kdsdpfxoz Rxg Hs Ahbsu Driven Tools No

Condition: used, Year of construction: 2017, operating hours: 15,186 h, Equipment: documentation/manual, We are offering this used INDEX ABC 65 SL CNC lathe, manufactured in 2017. Machine type: ABC Year of manufacture: 2017 Operating hours (hydraulics): 15,186 Kedpfx Ahjz Ri Ibebsdu Turret 1 with 7 stations, VDI 25, and W-gearing Synchronous spindle with chuck or collet possible! Turret 2 with 6 stations and dovetail mounting Powered tools on turret 2 Ejection blowing device Transmit function – Teleservice Three rear boring spindles for fixed tools Magazine above the main spindle Conveyor belt Chip conveyor, hinged belt – workpiece removal device – workpiece feed unit INDEX LMI bar feeder magazines If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) Ksdpfx Ahjz N Hdwobsdu - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 1992, operating hours: 60,000 h, spindle speed (max.): 3,000 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: FANUC, controller model: Series 15 T, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1992. This Monforts RNC 5 features a maximum turning diameter of 340 mm and a turning length of 1000 mm. It is equipped with a control system from Fanuc Series 15 T and offers 12 tool positions for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 5 machine we have for sale. Contact us for further details. - Typical Workpiece Materials: Case-hardening steel - Typical Workpiece Components: Shafts, gears - Production Environment: Single parts and small series- Max. Swing Diameter over Bed: 600 mm- Swing Diameter over Bed Slide: 450 mm- Max. Turning Diameter: 340 mm- Max. Turning Length: 1000 mm- Turning Diameter Range: 50 - 250 mm- Number of Tool Positions: 12 tools- Driven Tools Power: 4.5 kW- Driven Tools Speed: 3000 rpm- Counter Spindle: No (Single main spindle machine)- Material Clearance / Spindle Bore: 85 mm- Bar Capacity Max.: 78 mm- Chuck Work Max Weight: 25 kg- Center Work Max Weight: 35 kg Technical Specification Counter Spindle No Driven Tools Yes Kdjdpfx Aoz N Hbcjhbsu

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,200 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 29,800 W, overall weight: 5,443 kg, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2022. This HAAS ST-28L features a chuck size of 12.0 in (305 mm) and a maximum part swing of 21.0 in (533 mm). It offers a maximum cutting length of 42.5 in (1080 mm) and a spindle power of 40.0 hp (29.8 kW). If you are looking to get high-quality turning capabilities, consider the HAAS ST-28L machine we have for sale. Contact us for further details. • Working hours: 0 (Showroom machine) Kdedpez N Ergsfx Ahbju • Chuck size: 12.0 in (305 mm) • Max part swing: 21.0 in (533 mm) • Max cutting diameter (with BOT turret): 13.00 in (330 mm) • Max cutting diameter (with BMT65 turret): 11.75 in (298 mm) • Max cutting length: 42.5 in (1080 mm) • Bar capacity: 4.00 in (102 mm) • Rapids X/Z: 945 ipm (24.0 m/min) • Max thrust X: 4100 lbf (18238 N) • Max thrust Z: 5100 lbf (22686 N) • Spindle nose: A2-8 • Spindle torque (max): 425.0 ft-lbf @ 325 rpm (576.0 Nm @ 325 rpm) • Spindle bore: 4.62 in (117.3 mm) • Turret: 12-station BOT • Boring bar rear clearance: 4.00 in (102.0 mm) • Coolant capacity: 55 gal (208 L) • Air required: 4 scfm @ 100 psi (113.0 L/min @ 6.9 bar) • Inline air hose & coupler: 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Input AC voltage (3-phase): 220 VAC / 440 VAC • Full load amps (3-phase): 70 A (220 VAC) / 35 A (440 VAC) • Shipping dimensions: 190.0 x 90.0 x 90.0 in (483 x 229 x 229 cm) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 572 mm, spindle motor power: 22,400 W, overall weight: 5,580 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis HAAS ST-25Y was manufactured in 2022. It features a maximum cutting diameter of 11.75 in and a maximum cutting length of 22.5 in. The machine is equipped with a 10 in chuck size and a robust spindle speed of 3400 rpm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-25Y horizontal turning machine we have for sale. Contact us for further details. Kdodpfxjz N Dmve Ahbou • Working hours: 0 (showroom machine) • Chuck size: 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 11.75 in / 298 mm • Max cutting length: 22.5 in / 572 mm • Bar capacity: 3.00 in / 76 mm • Rapids (X / Y / Z): 472 ipm (12.0 m/min) / 472 ipm (12.0 m/min) / 945 ipm (24.0 m/min) • Max thrust (X / Y / Z): 4100 lbf (18238 N) / 2300 lbf (10231 N) / 5100 lbf (22686 N) • Spindle nose: A2-6 • Max spindle torque: 300.0 ft-lbf @ 500 rpm / 407.0 Nm @ 500 rpm • Spindle bore diameter: 3.50 in / 88.9 mm • Main spindle C axis max rating: 5.0 hp / 3.7 kW • Main spindle C axis max speed: 60 rpm • Main spindle C axis positioning: ± 0.01° • Main spindle C axis brake diameter: 13.9 in / 353 mm • Main spindle C axis brake holding torque: 250 ft-lbf / 339 Nm • Sub-spindle chuck size: 5.3 in / 135 mm • Sub-spindle nose: A2-5 • Sub-spindle max speed: 6000 rpm • Sub-spindle max sync speed with main spindle: 3400 rpm • Sub-spindle chuck throat: Ø 1.30 in x 1.37 in deep / Ø 33.0 mm x 34.8 mm deep • Sub-spindle drawbar bore (non-through): Ø 1.00 in x 4.50 in deep / Ø 25.4 mm x 114.3 mm deep • Sub-spindle bore (without chuck and drawbar): 1.50 in / 38.1 mm • Sub-spindle integrated brake torque: 17 ft-lbf / 23 N·m • Sub-spindle orientation accuracy: ± 0.02° • Sub-spindle rapids (B-axis): 400 ipm / 10 m/min • OD vs ID tools: Any combination • Boring bar rear clearance: 4.00 in / 102.0 mm • Live tooling max speed: 4000 rpm • Live tooling interface: BMT65 • Coolant capacity: 55 gal / 208 L • Air requirements: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline air hose and coupler: 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Drive system: Direct speed, belt drive • Electrical requirements: Low 220 VAC @ 70 A / High 440 VAC @ 35 A (3 Phase) • Shipping dimensions (domestic): 142.0 in x 90.0 in x 92.0 in / 361 cm x 229 cm x 234 cm Technical Specification Driven Tools Yes Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm Kdodjz N Dhtopfx Ahbeu • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 4,500 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 440 mm, controller manufacturer: FANUC, controller model: 21i-T, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Cincinnati HAWK 200 was manufactured in 2004. It features a turning length of 500 mm and a maximum turning diameter of 250 mm. The machine is equipped with a FANUC 21i-T CNC control and has a turret capacity of 12 tools. If you are looking to get high-quality turning capabilities, consider the Cincinnati HAWK 200 CNC lathe we have for sale. Contact us for further details. • Turning length: 500 mm • Maximum turning diameter: 250 mm • Swing over bed: 400 mm • Swing over cross slide: 380 mm • Spindle bore: 63 mm • Driven tools: Yes, 6 driven tools Kdodoz N A U Sepfx Ahbju Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 11,200 W, number of axes: 3, This 3-axis HAAS ST-10Y was manufactured in 2023. It features a maximum cutting diameter of 11.00 in and a maximum cutting length of 16.0 in. The machine is equipped with a 12-station turret and offers rapid movements of up to 1200 ipm on the Z-axis. If you are looking to get high-quality turning capabilities, consider the HAAS ST-10Y horizontal turning machine we have for sale. Contact us for further details. • Working Hours: 0 • Showroom Machine • Chuck Size: 6.5 in / 165 mm Ksdpoz Nz T Hsfx Ahbsdu • Max Part Swing: 16.5 in / 419 mm • Max Cutting Diameter: 11.00 in / 279 mm (with BMT45 turret) • Max Cutting Length: 16.0 in / 406 mm • Bar Capacity: 1.75 in / 44 mm • Rapids on X: 472 ipm / 12.0 m/min • Rapids on Y: 472 ipm / 12.0 m/min • Rapids on Z: 1200 ipm / 30.5 m/min • Max Thrust X: 2400 lbf / 10676 N • Max Thrust Y: 2300 lbf / 10231 N • Max Thrust Z: 3700 lbf / 16458 N • Spindle Nose: A2-5 • Spindle Max Torque: 75.0 ft-lbf @ 1300 rpm / 102.0 Nm @ 1300 rpm • Draw Tube Bore ø: 1.81 in / 46 mm • Spindle Bore ø: 2.31 in / 58.7 mm • Main Spindle C Axis Max Speed: 60 rpm • Main Spindle C Axis Positioning: ± 0.02° • Sub-Spindle Chuck Size: 5.3 in / 135 mm • Sub-Spindle Max Speed: 6000 rpm • Tailstock Taper: MT3 • Tailstock Hydraulic Quill Travel: 3.8 in / 95 mm • Turret Stations: 12 Stations (BMT45) • Live Tooling Max Speed: 4000 rpm • Coolant Capacity: 30 gal / 114 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Shipping Weight: 7900 lb / 3584.0 kg Additional equipment • Robot Package Max Load Capacity at Wrist: 15.4 lb / 7 kg • Robot Package Reach: 35.9 in / 911 mm • Robot Package Repeatability: 0.0004 in / 0.010 mm • Robot Single Gripper Max Part Weight: 7.9 lb / 3.6 kg • Robot Dual Gripper Max Part Weight: 5.0 lb / 2.3 kg per gripper Technical Specification Counter Spindle Yes Driven Tools No